Trying to boot backtack 4 and I am running into issues. There are a few different options to boot from. And this happens with whichever option I choose.
Other live distros work. I have tried 2 different isos and 4 different dvds. And the live boot works when I try it in virtualbox. Per a google search I turned plug and play os on and off in the bios. Haven't tried much else.
I am facing a problem while installing backtrack 4.0 on my virtual box. After assigning a hard drive and booting from the live cd, i am receiving a error message as follows:
Loading, please wait... Buffer I/O error on device hdc, logical block 76636 (this statement gets repeated like four times with different logical block id. SQUASHFS error: squashfs_read_data failed to read block 0x5bb337b9 SQUASHFS error: unable to read is index table.
It is not the first time i install operating systems on virtual box though it is the first time i receive such an error with backtrack.
I installed Ubuntu, with a dual boot functionality and worked great. I was recommended Backtrack 4 and I installed it in the system. Now, I try to use the dual boot with Backtrack, Ubuntu and Windows 7 and only Backtrack works. I tried the restore disks that I created when I got the laptop, but the problem persists. s there a way to delete this Backtrack from the system and go back to Windows 7?
I'm using 10.10 (updated from 10.04) and from the 10.04 I had problems when the system updated the kernel. After a kernel upgrade I can't boot to my other linux(Backtrack) due to wrong uuids. I must go to /boot/grub/grub.cfg and remove the uid and put /dev/sda5 for example. If I don't edit backtrack loads to busybox. Is there any way to fix that parameteres permantly? Because I don't want to make this change every time.
I am attempting to triple boot Ubuntu, Windows 7, and Backtrack 4. Win7 and Ubuntu are both booting and working properly, but after trying a number of configurations for GRUB I cannot boot Backtrack. Everything I attempt seems to come back to one problem and result in the same error: Error 17.
sda contains both my Windows and Ubuntu partitions...
Code: Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x07dccf10
Generally I am used to installations of dual boot on different partitions(the traditional method) any windows OS with any ubuntu OS.I tried that with backtrack 4 and Ubuntu 10.04 netbook edition! I had previously installed ubuntu 10.04 and then had an extra partition that had data in it.Went ahead to boot with the backtrack 4 disk BUT it did not give me an option for installing them side-by side so i did it manually by editing the partition with the partitioner! I had 2 swamp spaces one i which was initially there for Ubuntu and the other i created! Then simply formated ine partition with EXT3 and mountpoint of / which made two of them!after installation, the grub shows that there is another OS but when it does not load!
I have just tried to load Ubuntu 11.04 live CD (DVD) onto an IBM M52/MMC/8214. I bought the M52 to replace an older PC, which loaded the DVD without problem, so there is no problem with the DVD. The M52 works fine with Windows. Following is what happens when I try to load the DVD:
...finds Mac address ...finds GUID ...sits on DHCP.../ for a couple of minutes then displays ...PXE-E53: No boot filename received followed by PXE-M0F: Exiting Intel Boot Agent 1962: No operating system found.
It then boots into Windows. I'm not entirely new to Linux, having played with Ubuntu for a while, but have never had a problem. Now, I'm stuck!
How to speed up linux live cd boot up?I have remastered a live distro, i need to speed up its booting process as a live cd, is there any way to do this?Is there any kernel parameter to boost up the live cd boot up process?
M$ 7 on my new laptop (one month out of warranty)has died. I have several iso files and several downloaded programs that I wish to put on DVDs before I do a restore. I have tried Slax, Kubuntu, and Mint from USB live boot. None of them will let me burn the files to DVDs. My largest USB stick is 4gig. K3b in Slax shows that I don't have enough temp file space, but will not let me use the hard drive for temp. Options I am considering:
Getting a larger USB stick. Booting from CD and copying up to 4gigs at a time and moving it to my desk top. Resizing the ntfs partition to give me about 20-30gigs for installing Slackware. Buying an external hard drive and copy them to it. (starting to really like this one) Forgetting it and restore and spend many hours downloading them again. (Really would rather not) I can do any of these options, but want to see if there is an option I haven't considered.
I'm having trouble getting my computer to boot from two different linux live cds, and I'm looking for ideas. Last night, I downloaded both Damn Small and Puppy linux to my emac and burned disk images of both. When I tried to boot my Dell Inspiron 8100 with them, they both appeared to work at first, but then both stopped booting part way through the process. I've run this computer on an earlier live cd version of Puppy without any problems before, and the fact that neither disk works leads me to believe I did something wrong when burning them.
I downloaded the iso files for both Puppy and Damn Small and burned these as images each to their own disk. This all I remember doing before, and I like I said, it worked in the past. I'll post more details later in the day--like where the boot process actually stops and what versions of each system I downloaded, but if this rings any bells for anyone.
I have used freespire and PCLinux these are both full Linux versions but they both take a good while to a) install and b) run from the Live CD, can anyone recommend a stripped down version of Linux that is quick to boot from a live CD etc but still has a good amount of featues, for testing purposes?
I installed a copy of Fedora 13 onto my HDD yesterday and everything went fine until, for some reason, it stopped working. (Got stuck at the white bar while booting up). Well, I wasn't sure what the problem was so I decided to run the live CD again (which *is* a good CD, unless it somehow managed to destroy itself since yesterday) and I get "Could not mount root filesystem," sleeping forever. Hm.I haven't changed any of the hardware, and all the connections seem to still be good, so, I dunno... Any ideas on what could be the problem? Thanks in advance for any input.:UPDATE:Now my computer simply displays a list of repeating errors, each one like:Quote:
[URL] I'm currently running simplyMEPIS 8.0.15 (rel 32). It's booting automatically off a USB. The way I have it configured right now, it just loads right up without a root menu or boot-options, just basically going straight to "hey, u ROOT or DEMO?" I'm not sure if there's a way to get back to the bash and load directly to RAM at this point.
In another thread I was looking into burning backups from k3b as I run live because my DVD-player isn't behaving right now under windows... 'still working on that I want to get a backup done before I do a hard install. It's my goal to get either Kismet, wireshark, or Airsnort/crack/peek running on this machine so I can start gathering packets and doing analysis. Is that a way that (atleast for the timebeing until I can work out backups) that I can install any of these programs directly to the USB (by editing the ISO somehow?), so that they'll be available when I liveboot?
I am having a laptop with Vista installed on it. I have an Ubuntu live CD (karmic) which is refusing to boot on this machine. I get an error : "Error reading boot CD" and a reboot button. I have tried this cd on other machines and it works fine. I tried live CD of kubuntu also but the same error message appears. What could be the reason?
Machine spec: 2GB RAM, Intel core 2 duo processor.
New to Linux,after burned live cd,was left in the drive,then fund out the disk,from the drive next morning,and the computer(inspiron dell,windows vista)came with blue screen,after reboot the computer i have the black screen with this.ot boot device available after run knoppix live cd..."then i did F8 and when to windows system boot options, no one worked sofar,even r repair,then i did put the burned linux disk"knoppix live cd is mounted but was in germany,spanish and english are my options,do not what to do it next,how can i recover the windows system?i'm downloading another live cd in english,but no sure if the previous disk version,that i don't know wich it's? is going to be a problem with the new disk,the original intention with the disk,was to repair a dell xps 2010 with the windows32 system corrupted,some said that's possible with linux.
I have an older compaq laptop (P4). I just wanted to be able to boot a live cd. The trouble is the only live cd I can get to boot is SUSE 9.2 and it ends up having a scripting error. It is an old disk so it is probably shot.
I have tried to get fedora 14 to boot, but it will not. A newer computer I have will boot from the FC14.
I tried to use Grub to boot the Fedora 14 Live CD from its ISO image (SHA256 verified) on the hard drive. I put Fedora-14-x86_64-Live-Desktop.iso in the root directory of the FAT32 partition D: (sda5) then extracted isolinux from this ISO, and put it on D: I followed the isolinux.cfg file, and wrote a menu.lst as follows:
title Fedora 14 Live CD root (hd0,4) kernel (hd0,4)/isolinux/vmlinuz0 root=live:CDLABEL=Fedora-14-x86_64-Live-Desktop rootfstype=auto ro liveimg quiet rhgb initrd (hd0,4)/isolinux/initrd0.img
However Grub told me: No root device found. Boot has failed. Sleeping forever. Here's the contents of isolinux.cfg:
I want to dual boot Fedora 11 and Windows Vista, and the last time I tried I deleted my Windows Vista (big no no). So, I've made a partition of about 30GB, and I'm trying to go through the installation (from the live CD), but I don't know quite what to do? If I select Shrink existing disk, it doesn't let me do it for any amount that I put in, by the way.
Today i install virtual box in backtrack 4 becous i want install windows 7 for try tools BT on Windows 7 but... intercept this message wean i start the virtual [url]
I have a Windows laptop that isn't booting up anymore for some reason Safe Mode doesn't even work. Looking at what is printed out when it hangs, I did a search on google and it is some sort of HP laptop problem. Apparently the hard drive should still be OK, if only I can access it somehow. I was thinking maybe I could use one of those live Linux CDs to boot up. But I'm not too familiar with those. Would they be able to detect the laptop's DVD burner, and allow me to burn files off the NTFS partition to a blank DVD? I want to get my data off before I hand the laptop over to the IT department - who knows what they will do to it. So exactly which live Linux CD flavor should I use (my other working computer only has a CD burner)? And then would it be easy to burn a DVD after booting up the live Linux CD?
I'm working on a tutorial using Backtrack 4 Live USB, and I would like to take a screencast of what I'm doing (not just screenshots)So far I have tried these application with limited success:-recordmydesktop -xvidcap -wink -istanbul -vlc -vnc2flvEach time I try the resulting files are generally choppy (at best 1 frame per second) and most don't even end up with a clear view of the screen each time.
i am noob to backtrack i have tplink wireless usb adapter TL-WN722N and i want to install its driver on backtrack 3 plz help me and give reply fast with full tutorial of installing driver.thank full to you. you can also send tutorial to my personal mail.
i have old version for nmap:root@bt:~# nmap --version nmap version 5.35DC1 ( http://nmap.org ) i download new version, but before i install it, is there a way to upgrade the old one on my system? or need to un-install the old version and install the new version? i tried this:
root@bt:~# yum upgrade nmap Setting up Upgrade Process Could not find update match for nmap No Packages marked for Update root@bt:~#
