I tried triple booting Ubuntu,Backtrack and windows 7.
I have installed ubuntu through wubi but can install seperately also
How should i proceed?
I have been scared of grub and i wanna overcome it.
I am attempting to triple boot Ubuntu, Windows 7, and Backtrack 4. Win7 and Ubuntu are both booting and working properly, but after trying a number of configurations for GRUB I cannot boot Backtrack. Everything I attempt seems to come back to one problem and result in the same error: Error 17.
sda contains both my Windows and Ubuntu partitions...
Code:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x07dccf10
[Code].....
I tried triple booting Ubuntu,Backtrack and windows 7.
I have installed ubuntu through wubi but can install seperately also
How should i proceed?
I have been scared of grub and i wanna overcome it.
I want to triple boot Windows 7, Ubuntu and Moblin/whatever other fast booting OS I come across. At the moment, I've got Windows 7 and Ubuntu there. I can make free space for Moblin, but how would I configure GRUB 2 so it reads it too?
Moblin does have a GRUB, but I'm presuming that its the legacy version, not GRUB 2. How would I get the Ubuntu GRUB back as the main bootloader if that were the case?
This is just planning, there will probably be more question springing to mind later on.
My computer has windows 7 and kubuntu 8.0.4 installed. I install fedora 12 in the /dev/sda8 ext4 partition now. Currently the computer can dual boot windows 7 and kubuntu 8.0.4. I want to make the computer triple boot. Executing the update-grub command in Kubuntu's Konsole do not detect and add an entry for the Fedora installation in menu.lst.
View 1 Replies View RelatedI installed Ubuntu, with a dual boot functionality and worked great. I was recommended Backtrack 4 and I installed it in the system. Now, I try to use the dual boot with Backtrack, Ubuntu and Windows 7 and only Backtrack works. I tried the restore disks that I created when I got the laptop, but the problem persists. s there a way to delete this Backtrack from the system and go back to Windows 7?
View 7 Replies View Relatedi successfully install backtrack 3 but i cant see windows option anywhere in my lilo boot loader
View 10 Replies View RelatedI have installed reFIT-based triple boot. Here is the partition scheme:1. GPT Protective Partition (GPT and MFT). Mac OS X (GPT and MFT)3. Windows 7 64-bit C: (GPT and MFT)4. Windows 7 64-bit D: (GPT and MFT)5. Ubuntu 10.04 / (only GPT)6. Ubuntu 10.04 swap (only GPT)Windows only supports MFT and thus sees last two partitions (5 and 6) as unallocated space. Can I somehow make it see these partitions to be able to access files from Ubuntu?P.S. I know this is rather Windows problem, but I don't know any good forums where I can ask that, because mostly on these forums the answer is "Why would you need anything but Windows?".
View 8 Replies View RelatedI've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
View 9 Replies View RelatedI have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies View RelatedI'm currently on a work trip with my Asus G72GX laptop for non-work use (I'm posting from my work laptop). Yesterday, I accidentally booted into my laptop's recovery partition (from the Grub2 bootloader). Before I realized that that's what was happening, it booted into some kind of recovery program which ended up in an error. I restarted the laptop and couldn't get into the bootloader anymore. Now, the only thing that comes up is an error -- "error: unknown filesystem." Below that, it gives me the "grub rescue>" prompt. Most of the commands that sites list for grub rescue only return "Unknown command". ls works and lists all of my partitions: (hd0), (hd0,msdos, (hd0,msdos7), etc. down to msdos1. When I "ls (hd0,msdos" (etc, etc) it says "error: unknown filesystem."
I then started looking into booting from a Live Ubuntu USB drive. I've tried 11.04 and 10.04 now and they both do the same thing. I put them on an 8GB flash drive (only 1 at any given time) using Universal USB Installer and was able to get to the Ubuntu menu (Run Ubuntu from this USB, Install Ubuntu on a Hard Disk, etc.) If I try either "Run Ubuntu" or "Install Ubuntu", the screen flickers and comes right back to that menu.BTW, my 3 operating systems are: Windows 7 HP 64-bit, Mythbuntu 10.10 64-bit, and Windows XP 32-bit. Laptop hardware: Core 2 Duo P8700 2.53GHz, 6GB RAM, Nvidia 8800 GTX video card.
I would consider myself an advanced user of Windows. I know some of the commands used due to my knowledge of PHP. I would like tri-booting Windows 7 Ultimate 64 bit, BackTrack 4 and Ubuntu Server 10.10 64 bit. Windows 7 is the main OS involved, which is on a HDD with about 800GB free space, so space isn't a problem. I have BT4 and Ubuntu ISOs downloaded and on DVDs ready to install.
Do I create partitions first in Windows or do I let the installer do it? What sizes would you recommend? What size for the swap partition?
What order should I install the two OS'? I already tried installing both of them, (Ubuntu first then BT4) but BT4 did not show up in grub when booting, even after updating grub through Ubuntu. I also think I make a mistake when installing Ubuntu as I didn't install any packages. I would like to use the gnome desktop environment on Ubuntu but every time I tried to install the package I got the error "package not found". So then I deleted both OS' and restored the MBR.
I'm using a 3G USB modem to connect to the internet. Will both of these distros work with it?
does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
well, I've made my laptop become triple-boot. They are : fedora 8, backtrack 4, and windows 7. The problem's I can't access my either windows 7 or backtrack. I can only access my fedora 8.
View 14 Replies View RelatedI'm using 10.10 (updated from 10.04) and from the 10.04 I had problems when the system updated the kernel. After a kernel upgrade I can't boot to my other linux(Backtrack) due to wrong uuids. I must go to /boot/grub/grub.cfg and remove the uid and put /dev/sda5 for example. If I don't edit backtrack loads to busybox. Is there any way to fix that parameteres permantly? Because I don't want to make this change every time.
View 8 Replies View RelatedI will like to triple boot Ubuntu, XP and Windows 7, but I already had Ubuntu and XP running on separate HDDs, Ubuntu was installed first, then I installed XP on a separate HDD (with the Ubuntu HDD disconnected), now I did the same for Windows 7, I disconnected all other HDDs (Ubuntu, XP and Data)and installed windows 7 on a separate HDD.When I connected everything back(Ubuntu HDD, XP, Data HDDs and Windows 7 HDD, Windows 7 does not appear on grub boot menu and now Windows 7 does not boot up by it self.
Is there a way to simply add Windows 7 to Grub so I can have all 3 OS's on grub menu?Can grub search HDDs to look for OSs to add to the menu?Funny thing is the XP entry on grub appeared by it self, I've never edited grub to add XP on the booting menu, I was booting directly to XP by going into the BIOS and selecting the XP HDD as my booting drive instead of Ubuntu HDD, somehow XP was added to the grub booting menu.
Trying to boot backtack 4 and I am running into issues. There are a few different options to boot from. And this happens with whichever option I choose.
Hda: cdrom_decode_status: status=0x51 {driveready seekcomplete error}
Hda: cdrom_decode_status: error=0x40 {lastfailedsense=0x40 }
Hda: possibly failed opcode: 0xa0
Other live distros work. I have tried 2 different isos and 4 different dvds. And the live boot works when I try it in virtualbox. Per a google search I turned plug and play os on and off in the bios. Haven't tried much else.
I've decided to triple boot on my system, but I want to make sure it's feasible. Here's my set-up: I've got two 500GB hard drives, and a good amount of power to handle the OS's. I want to set-up Ubuntu as my main OS on a single hard drive. Then, I want to put XP and 7 on the second hard drive, side-by-side. Obviously, I would then want a bootloader to display an option at system start to pick either one.
The reason I want all these is for gaming mainly, and Netflix. I've got old games that only work on XP, and some newer games are coming out that I'm sure will run better on Windows 7 (Starcraft 2 is going to be amazing!). I found this documentation: [URL]. It's obviously for dual booting Windows and Ubuntu. My question is, can I triple boot Ubuntu, Windows XP and Windows 7? If so (and I'm positive I can) are there any good resources for the process?
i'm currently dual booting windows xp and ubuntu with ubuntu installed first. is it possible to triple boot with opensuse 11.2?
View 3 Replies View RelatedI'm trying to install (k)Ubuntu 10.04 side-by-side via Wubi, so that I can triple-boot Windows with the GNOME and KDE flavors of Ubuntu. Is there a way to install an OS to another folder?
View 1 Replies View RelatedI'm running a 64bit Version of Windows 7. I'm also dual-booting 64bit Ubuntu 10.04 (if it matters). However, for this I'm trying to get this working on the Windows 7 side of things. I downloaded the BackTrack 5 32bit GNOME .iso file (BT5-GNOME-32.iso) to my USB stick fine and made a VM on VMware Player. I set the OS as "Other Linux 2.6.x kernel" (if it matters). However, when I go to play my VM I get the following screen. I know I'm supposed to type Startx to launch the GUI. However, nothing happens; it's completely unresponsive (and yes keyboard focus is routed to the VM). There is no response, the cursor doesn't even blink.
View 1 Replies View RelatedI Currently have Windows 7 and Ubuntu 10.10 on dual boot system, but I want to change that. I want Win 7, openSuse 11.3 and Ubuntu 10.10 on a triple Boot. I have a 500gb sata hdd. The Rough Plan was to 150gb for Win7, 150 for openSuse 11.3 (50gb for / and 100gb for /home) and same again for Ubuntu 10.10 and 50gb for Swap. I am using entire drive for 3 Operating Systems and Swap. I have read a few guides and they all say install win7 then opensuse then ubuntu, and thats fine but none say anything about partitioning. And one main problem is cant split into more than 4 different partitions.
View 3 Replies View RelatedI have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
For completeness here's the history that got me to this point:
Stage 1
/dev/sda - disk with XP OS, set to be first boot disk in BIOS
/dev/sdb - a small data disk to supplement sda
[code]....
How would I install OSX on my PC so it would still boot to GRUB? And how would I add OSX to GRUB? Or should I use some other bootloader?
View 4 Replies View RelatedI have (only bc i have to) windows vista, also Ubuntu 10.04 on the same drive, and dual-booting is no issue at all. But after I installed Mandriva 2010 to try to triple boot, i couldn't find Ubuntu anymore so I got rid of mandriva, and grub was messed up bc I deleted all mandriva partitions. So then I installed Xubuntu 9.10 (because it is a quick install) to recover grub, and with Xubuntu, Ubuntu, and vista, Grub sees all three OSes no problem. So what would I have to do to make Grub work this way when I install Mandriva?
View 5 Replies View RelatedI've looked everywhere for a satisfactory answer, to no avail. I wish to triple boot xp/98/ubuntu 10.10. Is this an appropriate HDD setup? (it looks like this in partition magic pro srever 8.05)
*:SYSTEM........ NTFS......... primary ..........(for xp)
C:WIN98......... fat32 .........primary,active (for win98 )
*:UBUNTU....... LinuxExt3 ...Primary ..........(for Maverick Meerkat)
.........* Extended
............. *:SWAPSPACE2.... Linux swap .....logical
. ...........D: DATA................. fat32............. logical (for all things backup)
There is nothing on any of the drives at this point. (I am submitting this on a crappy 233mhz win95 laptop)
Here's the information i've gathered so far... Install in the following order: 98, XP, Ubuntu XP's drive label MUST be "SYSTEM" (I think?) Installing multiple os's is easy (i've read) if you hide unused partitions during install (ie. if installing XP, hide C:WIN98 and *:UBUNTU partitions) but i can only do this with FAT formats, and if i do that, the dirve letter changes, which is a problem (i suppose i could manually hide/unhide, and set active the partition I want at every boot-up....(Damn))
And here's a couple more questions SHOULD I make everything fat32? do they have to be primary to boot? ('98 on an inactive partition won't load) Once they are all installed... where do i put grub? Do i put it in first? Also, I deleted my dell utility partition to do this, is that a problem? (LOL, I have NO idea what I'm doing...Fck)
Like i said, finding information about the partition setup (logical/primary) is damn near impossible. Even if it's just a "Ya that'll do for a setup"
I'm gonna keep experimenting, since there's no longer anything to lose on my HDD, and i'll report back any improvements I come across
I want to install a triple boot load consisting of Windows 7, Ubuntu 10.04, and Fedora.My question is, if I install Windows 7, followed by another distro, like Fedora, and then install Ubuntu 10.04, will the Ubuntu GRUB 2 menu display all three options?I know if I install Ubuntu and then install Fedora, I have to go through some heavy gyrations to get everything to show in the load menu, so it seems easier to install Ubuntu last.
View 2 Replies View RelatedI wondered whether it is possible to add a PC-BSD system to my existing OS X 10.6.6 + UBUNTU (using rEFIt)
How to resize the partition with linux and installing PC-BSD 8.1 on my Mac?
First I installed OS X and updated it to 10.6.6
Then I created a BOOTCAMP-Partition using the bootcamp-utility
Then I installed rEFIt
Then I installed UBUNTU (and the dual-boot works very well)
Now I want to add a PC-BSD
May I change the partition-size of the UBUNTU-partition without destroying MBR oder rEFIt? If yes, will rEFIt recognize the newly installed PC-BSD?
Its sort of OSX+Multi-Linux. There is a wonderful page at [url] but unfortunately the section is not updated yet.
trying to triple boot XP, Ubuntu, RHEL 5.4but unable to bring every thing in boot loader.* It loads XP with Ubuntu successfully or XP with RHEL 5.4 but not all the three.* when I install XP followed by Ubuntu then RHEL, I am not having a primary partition to install RHEL. It stops there.* I tried to copy the kernel path of ubuntu from grub.cfg in ubuntu and tried to edit in grub.conf file of rhel and added an entry but it displays in boot loader [start screen where it displays all OS listed] but unable to boot ubuntu [unable to load ubuntu kernel].Current situation reformat all Linux partitions and installed Ubuntu with below partition. installed successful. But rhel not installed due to error.Partition table:
/dev/hda1 > XP [primary patition][can boot and work]
/dev/hda2 > Ubuntu [primary patition][can boot and work]
/dev/hda5 > swap for ubuntu [secondary partition]
[code]....