Installation :: Triple Boot Ubuntu / Windows 7 And Backtrack 4?
Aug 22, 2009
I am attempting to triple boot Ubuntu, Windows 7, and Backtrack 4. Win7 and Ubuntu are both booting and working properly, but after trying a number of configurations for GRUB I cannot boot Backtrack. Everything I attempt seems to come back to one problem and result in the same error: Error 17.
sda contains both my Windows and Ubuntu partitions...
Code:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x07dccf10
I want to triple boot Windows 7, Ubuntu and Moblin/whatever other fast booting OS I come across. At the moment, I've got Windows 7 and Ubuntu there. I can make free space for Moblin, but how would I configure GRUB 2 so it reads it too?
Moblin does have a GRUB, but I'm presuming that its the legacy version, not GRUB 2. How would I get the Ubuntu GRUB back as the main bootloader if that were the case?
This is just planning, there will probably be more question springing to mind later on.
My computer has windows 7 and kubuntu 8.0.4 installed. I install fedora 12 in the /dev/sda8 ext4 partition now. Currently the computer can dual boot windows 7 and kubuntu 8.0.4. I want to make the computer triple boot. Executing the update-grub command in Kubuntu's Konsole do not detect and add an entry for the Fedora installation in menu.lst.
I installed Ubuntu, with a dual boot functionality and worked great. I was recommended Backtrack 4 and I installed it in the system. Now, I try to use the dual boot with Backtrack, Ubuntu and Windows 7 and only Backtrack works. I tried the restore disks that I created when I got the laptop, but the problem persists. s there a way to delete this Backtrack from the system and go back to Windows 7?
I have installed reFIT-based triple boot. Here is the partition scheme:1. GPT Protective Partition (GPT and MFT). Mac OS X (GPT and MFT)3. Windows 7 64-bit C: (GPT and MFT)4. Windows 7 64-bit D: (GPT and MFT)5. Ubuntu 10.04 / (only GPT)6. Ubuntu 10.04 swap (only GPT)Windows only supports MFT and thus sees last two partitions (5 and 6) as unallocated space. Can I somehow make it see these partitions to be able to access files from Ubuntu?P.S. I know this is rather Windows problem, but I don't know any good forums where I can ask that, because mostly on these forums the answer is "Why would you need anything but Windows?".
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
well, I've made my laptop become triple-boot. They are : fedora 8, backtrack 4, and windows 7. The problem's I can't access my either windows 7 or backtrack. I can only access my fedora 8.
I will like to triple boot Ubuntu, XP and Windows 7, but I already had Ubuntu and XP running on separate HDDs, Ubuntu was installed first, then I installed XP on a separate HDD (with the Ubuntu HDD disconnected), now I did the same for Windows 7, I disconnected all other HDDs (Ubuntu, XP and Data)and installed windows 7 on a separate HDD.When I connected everything back(Ubuntu HDD, XP, Data HDDs and Windows 7 HDD, Windows 7 does not appear on grub boot menu and now Windows 7 does not boot up by it self.
Is there a way to simply add Windows 7 to Grub so I can have all 3 OS's on grub menu?Can grub search HDDs to look for OSs to add to the menu?Funny thing is the XP entry on grub appeared by it self, I've never edited grub to add XP on the booting menu, I was booting directly to XP by going into the BIOS and selecting the XP HDD as my booting drive instead of Ubuntu HDD, somehow XP was added to the grub booting menu.
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
I have (only bc i have to) windows vista, also Ubuntu 10.04 on the same drive, and dual-booting is no issue at all. But after I installed Mandriva 2010 to try to triple boot, i couldn't find Ubuntu anymore so I got rid of mandriva, and grub was messed up bc I deleted all mandriva partitions. So then I installed Xubuntu 9.10 (because it is a quick install) to recover grub, and with Xubuntu, Ubuntu, and vista, Grub sees all three OSes no problem. So what would I have to do to make Grub work this way when I install Mandriva?
I want to install a triple boot load consisting of Windows 7, Ubuntu 10.04, and Fedora.My question is, if I install Windows 7, followed by another distro, like Fedora, and then install Ubuntu 10.04, will the Ubuntu GRUB 2 menu display all three options?I know if I install Ubuntu and then install Fedora, I have to go through some heavy gyrations to get everything to show in the load menu, so it seems easier to install Ubuntu last.
Generally I am used to installations of dual boot on different partitions(the traditional method) any windows OS with any ubuntu OS.I tried that with backtrack 4 and Ubuntu 10.04 netbook edition! I had previously installed ubuntu 10.04 and then had an extra partition that had data in it.Went ahead to boot with the backtrack 4 disk BUT it did not give me an option for installing them side-by side so i did it manually by editing the partition with the partitioner! I had 2 swamp spaces one i which was initially there for Ubuntu and the other i created! Then simply formated ine partition with EXT3 and mountpoint of / which made two of them!after installation, the grub shows that there is another OS but when it does not load!
I've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
I had Win7 installed on my Laptop and wanted to set up a triple boot with Fedora 12 and Mint 8.So I installed Fedora 12 and it worked loading grub and offering Win7 and Fedora as choices.Then I installed Mint hoping for the Grub2 to recognise Fedora and set up the triple boot but it didn't and I can now only boot into Win7 or Mint.sudo update-grub doesn't help.How can I configure grub2 to offer me all three OSs?
I recently installed ubuntu onto a pc running MS vista. Then I somehow managed to install a second instance of ubuntu. Both of these were on the (drive e Then because of HDD problems, I had to reformat my original drive with MS Vista (drive C). Because of installation problems with ms vista - I ended up installing it onto the drive e: also. But now I can no longer load ubuntu because the "GRUB" loader is missing. So my questions are:
1: How can I restore the "GRUB" loader? So I can access ubuntu again 2: How can I remove/uninstall the second ubuntu installation? 3: Is it possible to have a triple boot system with ms vista / ubuntu 32-bit / ubuntu 64-bit?
I have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
I i'm having trouble setting up my triple boot machine. I have Windows 7 and Mac OSX on two seperatate hard disks and they are dual booting fine with the chameleon bootloader. I just attempted to install ubuntu from liveCD which i downloaded and burned from the ubuntu website. During intallation i the option to "install side by side to windows" and resized the windows partition to make room for Ubuntu(250GB of 1TB), i also selected the option to disable the GRUB bootloader because i want to use chameleon. The installer completed successfully and the computer rebooted but chameleon, Mac OSX or windows (my partition for windows is 250GB smaller) won't recognize the partition.
I just upgraded to lucid lynx from karmic koala 64 bit. During the upgrade it complained about grub not working. It said if i didnt know what drive to mount i had to select all of them, which i did. Did i now damage my triple boot ? i had also win7/ winxp on my hd, but altho it says windows 7 in the grub menu if i select it nothing happens just a cursor blinking. I can get into Ubuntu okay. I looked at the forum here and saw someone being advised to get Bootinfo script.
I have been searching in preparation to install 10.04.1 with 2 installations of Windows,already installed.(Win 7 then Vista) I have left room at the end of the drive for Ubuntu. When I get to the stage to select the boot options and click on advanced, what should I select?
I have an MSI U100 netbook triple booting between Win XP, Ubuntu 9.04 and OSX. Grub is used as boot loader. I want to upgrade my ubuntu install but I am a bit scared that grub will be messed up.
I installed ubuntu on my dual boot system which had XP and Windows 7 installed, and after installing ubuntu I was able to boot windows 7 and ubuntu, but unable to boot XP it says some dll file is missing, now I think if try to repair xp with installation disk it might ruin my ubuntu.
I would like to triple boot vista, opensuse and ubuntu.
I need to set aside 165 gb for Vista (which has been backed up to an external drive).
Would like to make a fresh install of Ububtu and Opensuse with Ubunto being the main OS. I figured 100 GB for Ubuntu and 55 GB for Opensuse would probably be fine (the remainder I need to set aside for Vista).
Ive popped in the Ubuntu DVD and am about to install it but am stuck on the "allocate drive space" part. I do not understand how to partition the hd and what to set each partition to in the "Use as" and "Mount Point"
I have a dual boot with vista on disk 0 and ubuntu on disk1. I just installed a disk 2 that I would like to use to try out other distros. Ubuntu is the only linux experience I have had. I'm really not very good at all of this, so my questions before I start loading another distro are:
1. Does Fedora use GRUB as its installer? 2. When I installed ubuntu on disk 1 (sdb1), the install was very simple. I chose sdb1 for the install, it loaded it, and when it was done I simply had the choice of which drive to boot into. Will installing Fedora on disk 2 (sdc1) be just as simple, or will I encounter steps I must take to make it so that I have a choice of which disk/OS to boot into?
I am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
i am using windows7 and ubuntu 10.04 in my system and dual booting... now i wanna install fedora 13 along with it ans make it triple boot... so can one pls help me in this process as i havent installed fedora before and i wanna be safe and dont want to loose my Grub or windows bootloader in this process
