General :: How To Speed Up Live CD Boot Up

Jan 17, 2010

How to speed up linux live cd boot up?I have remastered a live distro, i need to speed up its booting process as a live cd, is there any way to do this?Is there any kernel parameter to boost up the live cd boot up process?

View 5 Replies


ADVERTISEMENT

General :: Cannot Boot Live USB

Aug 1, 2010

I am trying to boot into GParted-Live or Ubuntu-Live off a USB, it just won't happen.

I formatted a USB with files for GParted-Live found here: [URL]

Start the box, F12, boot menu to USB, I get...

SYSLINUX 3.86 2010-04-01 CBIO Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: _

I attempted this with a bunch of different utilities... [URL]

View 5 Replies View Related

General :: Live CD Won't Boot On IBM M52

Jun 28, 2011

I have just tried to load Ubuntu 11.04 live CD (DVD) onto an IBM M52/MMC/8214. I bought the M52 to replace an older PC, which loaded the DVD without problem, so there is no problem with the DVD. The M52 works fine with Windows. Following is what happens when I try to load the DVD:

...finds Mac address
...finds GUID
...sits on DHCP.../ for a couple of minutes
then displays
...PXE-E53: No boot filename received
followed by
PXE-M0F: Exiting Intel Boot Agent
1962: No operating system found.

It then boots into Windows. I'm not entirely new to Linux, having played with Ubuntu for a while, but have never had a problem. Now, I'm stuck!

View 5 Replies View Related

CentOS 5 :: How To Speed Up Boot Time / Disable Or Change Eth0 At Boot / Searching?

Jan 11, 2010

This on a Vostro 1220 Laptop w/ Intel 5300 wireless:

A.I have long boot up time.I think it's because of the eth0 network search which I don't use.I have an intel wireless 5300 card running.How can I speed up the boot time, i.e. disable or change the eth0 at boot, the searching?

B:When I restart or shutdown, the screen flashes repeatedly and gets some garbled colors along the top before finally rebooting looks like windows ME or something).This vostro has an intel x4500HD vid chipset in it.

C.How do I get into gnome configuration editor to turn on Metacity compositing? Alt-F2 and run gconf-editor doesn't do it. I don't do compiz, but need compositing.

D.I need to install Chromium Browser as it sync my bookmarks.I have RPMforge enabled btw also...how can I do that? I.e. rpm repo for chromium?

This will help me get off to a running start so I can get up to speed on CentOS..

View 3 Replies View Related

General :: Xbox - Boot From A Live Cd?

Sep 17, 2011

Is there a secret button combination like a PC's F2 or Delete that forces an Xbox to boot from a CD?

View 1 Replies View Related

General :: Burning Dvd From Live Boot

Mar 25, 2011

M$ 7 on my new laptop (one month out of warranty)has died. I have several iso files and several downloaded programs that I wish to put on DVDs before I do a restore. I have tried Slax, Kubuntu, and Mint from USB live boot. None of them will let me burn the files to DVDs. My largest USB stick is 4gig. K3b in Slax shows that I don't have enough temp file space, but will not let me use the hard drive for temp.
Options I am considering:

Getting a larger USB stick. Booting from CD and copying up to 4gigs at a time and moving it to my desk top. Resizing the ntfs partition to give me about 20-30gigs for installing Slackware. Buying an external hard drive and copy them to it. (starting to really like this one) Forgetting it and restore and spend many hours downloading them again. (Really would rather not) I can do any of these options, but want to see if there is an option I haven't considered.

View 4 Replies View Related

General :: Cannot Boot Live Backtrack Dvd

Sep 25, 2010

Trying to boot backtack 4 and I am running into issues. There are a few different options to boot from. And this happens with whichever option I choose.

Hda: cdrom_decode_status: status=0x51 {driveready seekcomplete error}
Hda: cdrom_decode_status: error=0x40 {lastfailedsense=0x40 }
Hda: possibly failed opcode: 0xa0

Other live distros work. I have tried 2 different isos and 4 different dvds. And the live boot works when I try it in virtualbox. Per a google search I turned plug and play os on and off in the bios. Haven't tried much else.

View 11 Replies View Related

General :: Getting Computer To Boot From Two Different Live Cds?

Oct 26, 2009

I'm having trouble getting my computer to boot from two different linux live cds, and I'm looking for ideas. Last night, I downloaded both Damn Small and Puppy linux to my emac and burned disk images of both. When I tried to boot my Dell Inspiron 8100 with them, they both appeared to work at first, but then both stopped booting part way through the process. I've run this computer on an earlier live cd version of Puppy without any problems before, and the fact that neither disk works leads me to believe I did something wrong when burning them.

I downloaded the iso files for both Puppy and Damn Small and burned these as images each to their own disk. This all I remember doing before, and I like I said, it worked in the past. I'll post more details later in the day--like where the boot process actually stops and what versions of each system I downloaded, but if this rings any bells for anyone.

View 4 Replies View Related

General :: Which Version Is Quickest To Boot From Live CD?

Sep 16, 2009

I have used freespire and PCLinux these are both full Linux versions but they both take a good while to a) install and b) run from the Live CD, can anyone recommend a stripped down version of Linux that is quick to boot from a live CD etc but still has a good amount of featues, for testing purposes?

View 9 Replies View Related

General :: Fedora 13 Live CD And HDD Install Won't Boot?

Sep 14, 2010

I installed a copy of Fedora 13 onto my HDD yesterday and everything went fine until, for some reason, it stopped working. (Got stuck at the white bar while booting up). Well, I wasn't sure what the problem was so I decided to run the live CD again (which *is* a good CD, unless it somehow managed to destroy itself since yesterday) and I get "Could not mount root filesystem," sleeping forever. Hm.I haven't changed any of the hardware, and all the connections seem to still be good, so, I dunno... Any ideas on what could be the problem? Thanks in advance for any input.:UPDATE:Now my computer simply displays a list of repeating errors, each one like:Quote:

ata1.00: failed commnad: read DMA
(...)
ata1.00: [ABRT]

View 1 Replies View Related

General :: Installing Programs For Use With Live Boot?

Apr 16, 2010

[URL] I'm currently running simplyMEPIS 8.0.15 (rel 32). It's booting automatically off a USB. The way I have it configured right now, it just loads right up without a root menu or boot-options, just basically going straight to "hey, u ROOT or DEMO?" I'm not sure if there's a way to get back to the bash and load directly to RAM at this point.

In another thread I was looking into burning backups from k3b as I run live because my DVD-player isn't behaving right now under windows... 'still working on that I want to get a backup done before I do a hard install. It's my goal to get either Kismet, wireshark, or Airsnort/crack/peek running on this machine so I can start gathering packets and doing analysis. Is that a way that (atleast for the timebeing until I can work out backups) that I can install any of these programs directly to the USB (by editing the ISO somehow?), so that they'll be available when I liveboot?

View 7 Replies View Related

General :: Live Cd Error Reading Boot Cd?

Apr 26, 2010

I am having a laptop with Vista installed on it. I have an Ubuntu live CD (karmic) which is refusing to boot on this machine. I get an error : "Error reading boot CD" and a reboot button. I have tried this cd on other machines and it works fine. I tried live CD of kubuntu also but the same error message appears. What could be the reason?

Machine spec: 2GB RAM, Intel core 2 duo processor.

View 5 Replies View Related

General :: No Boot Device Available After Run Knoppix Live Cd?

Mar 28, 2010

New to Linux,after burned live cd,was left in the drive,then fund out the disk,from the drive next morning,and the computer(inspiron dell,windows vista)came with blue screen,after reboot the computer i have the black screen with this.ot boot device available after run knoppix live cd..."then i did F8 and when to windows system boot options, no one worked sofar,even r repair,then i did put the burned linux disk"knoppix live cd is mounted but was in germany,spanish and english are my options,do not what to do it next,how can i recover the windows system?i'm downloading another live cd in english,but no sure if the previous disk version,that i don't know wich it's? is going to be a problem with the new disk,the original intention with the disk,was to repair a dell xps 2010 with the windows32 system corrupted,some said that's possible with linux.

View 2 Replies View Related

General :: Older Laptop Won't Boot Live Cd's?

Nov 5, 2010

I have an older compaq laptop (P4). I just wanted to be able to boot a live cd. The trouble is the only live cd I can get to boot is SUSE 9.2 and it ends up having a scripting error. It is an old disk so it is probably shot.

I have tried to get fedora 14 to boot, but it will not. A newer computer I have will boot from the FC14.

why I cannot get the live CD's to boot?

View 14 Replies View Related

General :: Boot Live USB With Latest Kubuntu Version 9.10?

Mar 25, 2010

I see a few guides for Ubuntu on a thumb drive, but will it work for Kubuntu?

View 1 Replies View Related

General :: Boot Fedora Live CD Iso From A Hard Drive?

Nov 11, 2010

I tried to use Grub to boot the Fedora 14 Live CD from its ISO image (SHA256 verified) on the hard drive. I put Fedora-14-x86_64-Live-Desktop.iso in the root directory of the FAT32 partition D: (sda5) then extracted isolinux from this ISO, and put it on D: I followed the isolinux.cfg file, and wrote a menu.lst as follows:

title Fedora 14 Live CD
root (hd0,4)
kernel (hd0,4)/isolinux/vmlinuz0 root=live:CDLABEL=Fedora-14-x86_64-Live-Desktop rootfstype=auto ro liveimg quiet rhgb
initrd (hd0,4)/isolinux/initrd0.img

However Grub told me: No root device found. Boot has failed. Sleeping forever. Here's the contents of isolinux.cfg:

[Code]...

View 3 Replies View Related

General :: Fedora 11 - Dual Boot Installation From Live CD

Oct 8, 2009

I want to dual boot Fedora 11 and Windows Vista, and the last time I tried I deleted my Windows Vista (big no no). So, I've made a partition of about 30GB, and I'm trying to go through the installation (from the live CD), but I don't know quite what to do? If I select Shrink existing disk, it doesn't let me do it for any amount that I put in, by the way.

View 14 Replies View Related

General :: Windows Laptop Won't Boot Up - Use Live CD To Save Data?

Apr 21, 2010

I have a Windows laptop that isn't booting up anymore for some reason Safe Mode doesn't even work. Looking at what is printed out when it hangs, I did a search on google and it is some sort of HP laptop problem. Apparently the hard drive should still be OK, if only I can access it somehow. I was thinking maybe I could use one of those live Linux CDs to boot up. But I'm not too familiar with those. Would they be able to detect the laptop's DVD burner, and allow me to burn files off the NTFS partition to a blank DVD? I want to get my data off before I hand the laptop over to the IT department - who knows what they will do to it. So exactly which live Linux CD flavor should I use (my other working computer only has a CD burner)? And then would it be easy to burn a DVD after booting up the live Linux CD?

View 1 Replies View Related

General :: Turn Turtle-speed Browsing Into Penguin-speed Browsing?

Oct 17, 2010

I've just installed Slackware 13.1 in two different laptops for first time. I have some strange internet browsing behaviour in one of the laptops. I've installed 2 internet browsers(firefox,opera) using the directions from Slackbuilds.org and there is also konqueror pre-installed. Moreover I installed Wicd network manager.

I can browse some pages e.g. ..... with firefox very slowly but NEVER facebook. I can browse almost any page, even facebook, with OPERA but very very slowly. The same goes with konqueror... Wicd shows that i am always connected with my WPA wireless network

Laptop details:

Quote:

Toshiba sattellite a100-209
//-----------------------------------------------
Processor Intel Celeron M 370 / 1.5 GHz
Databus-Speed 400 MHz
//-----------------------------------------------
Installed RAM 512 MB
Technology DDR2 SDRAM - 533 MHz

[code]....

View 7 Replies View Related

General :: Way To Re-install Grub On Master Boot Record Of Hard Disk Using Live CD?

Nov 29, 2010

Is there a way to re-install grub on the master boot record of a hard disk using a live cd?If so will i have to configure it?I'm trying to install a linux distro on my ao751h(with poulsbo ) but i after installing it i can't boot.I get an error 15 or a flashing underscore.I have already tried ubuntu,debian,mint and slackware(LILO isn't compatible with poulsbo).Also,does anybody experience problems with the ubuntu 10.04 and 10.10 installers or is it only me?when i choose the language and keyboard settings the installation stop as it is and i get a crash report.

View 4 Replies View Related

General :: Damaged Hard Disk Doesn't Pass SMART Test, And , Won't Boot With It Connected, Even From A Live CD?

Sep 19, 2010

Its basically an old SATA Hard Drive with a Windows XP partition I was trying to sell.When my computer does the BIOS checks, it doesn't pass the SMART test (but I can boot it anyway), although I can't boot Linux in any way with this Hard Disk connected (I even tried Live CD distros, like Parted Magic).I can boot the XP partition from inside the disk, although I guess its pretty close to not being able to. Is there any way to "fix" this Hard Drive?

View 3 Replies View Related

Ubuntu :: Speed Up 9.10 Boot Up Time?

Jan 11, 2010

Despite the fact that Ubuntu 9.10 boots up faster than its predecessors (I didn't time the boot up myself, so I can't say for sure), my Ubuntu laptop still takes around 50 seconds to boot up fully. Now I'm not happy with that, and I want it to boot up even faster.

View 9 Replies View Related

Fedora :: SSD Speed - Boot Up Takes 30 Seconds

Jun 25, 2011

Some days ago I switched from Ubuntu to Fedora and it is just great, Gnome 3 looks awesome. I waited for the installation of Fedora until I got my new OCZ Vertex 2 SSD and the first benchmarks were astonishing. The SSD has an average Read/Write speed of ca. 270Mb/s. Well, now I installed Fedora 15 and I was expecting a boot time of less than 20 seconds, but in fact it takes 30 seconds. By way of comparison, Ubuntu takes on my old HDD about 27 seconds, so a bit less than it takes on the SSD.

Then I tested some software, I started Eclipse and compared the start time on Ubuntu (HDD) and on Fedora (SDD). Starting Eclipse from the HDD took about 6 seconds while starting from the SSD took about 7 seconds. The differences in the results are not big, but taking into account that the SSD is at least twice as fast as the HDD the results are really strange. Now I would like to ask you how I may increase the performance of Fedora on my SSD?

Some notes about my hardware:
Intel Core2Duo 3GHz
4GB Ram
Sata2
On this screenshots you can see both drives in comparison, the ssd is much faster.

View 2 Replies View Related

OpenSUSE Install :: Boot Speed In KDE LiveCD

Sep 6, 2010

I'm having very strange issues with OpenSUSE 11.3 KDE LiveCD, mainly performance-wise. Most noticeably, it takes 10-30 minutes to actually boot the system, and it doesn't matter whether the LiveCD is booted from the USB or if it's install into the hard disk. There aren't any noticeable errors during boot, though, except a few "timeout" errors and not being able to lauch VirtualBox Guest Additions (which I don't need since it's not run from VirtualBox anyway).

It takes the most time during the "scanning USB devices" section if I boot from the USB, and during the state where it detects the network card/assigns an IP. In both cases, every dot that appears there takes around 2 minutes. During the boot, the PC seems to be mostly idle, and appears to do something only occasinally, when certain parts of the boot sequence are passed, so that makes boot up feel "jumpy" - nothing happens for 10 minutes, then the PC starts accessing the HDD, then nothing happens for 10 more minutes.

There are other performance problems, noticeably during installation to HDD (through the Install option from the CD startup menu - it's quite a bit faster when started from the running LiveCD). For instance, it takes around 5-10 minutes to make the screen where you need to choose the language and keyboard layout responsive. The performance, in both cases, seems to be inconsistent - sometimes it starts booting and responding quickly, the other times it's really slow, up to the point of outright hanging.

System specs:
CPU: AMD Phenom II X4 925
4GB RAM
HDD: WD Caviar Black 640 GB
GPU: ATI Radeon HD 4890

View 9 Replies View Related

OpenSUSE Install :: Speed Up Boot Time

Dec 26, 2010

Are there any easy special tricks to speed up the boot time?Coming from Linux Mint (GNOME), I could get to the Desktop from cold in less than 25 secs.Now in openSuse 11.3 (KDE4.5) it takes more than twice that.Is this a function of KDE or have Ubuntu done something that openSuse hasn't to speed up the boot?

View 9 Replies View Related

Ubuntu :: Tools To Speed Up The Time To Boot Up?

Jan 2, 2011

I'm curious if there are any tools that can help speed up the time it takes for my computer to boot up. I've used different utilities to help my Vista boot up time, so I'm curious if the same sort of things are available for Ubuntu.

View 3 Replies View Related

Ubuntu Multimedia :: Trying To Playback At Double Speed - VLC Will Play The Video At Normal Speed But With No Audio

Jul 23, 2011

Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.

View 1 Replies View Related

Ubuntu Installation :: Boot A 10.04 Desktop Live From An Iso Image In /boot Partition?

Nov 9, 2010

My laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list

Code:
# =========== GRUB4GOS ===================================
title == Use grub4dos for the following entries: ==

[code]....

View 3 Replies View Related

Ubuntu :: Live CD - Automatic Boot From CD - No Asking For Language & Livecd|hdd Boot

Dec 30, 2010

i do software (learn keyboard) for blind people. I selected ubuntu and festival and TTS. Please i NEED (mandatory for disabled people) live cd what can be inserted into cdrom and everything is done - automatic boot, settings done, software is on start-up... created own distribution, programed software, done settings, but what kills me is : How i can run AUTOMATIC (without asking, no enter) boot from CD-ROOM. Now CD asking :

- 1) What language want you (here is only czech) - need ENTER (killer for disabled people)
- 2) Boot from CD or hdd - need ENTER (killer no. 2 for disabeld people)
- after 2) I m ok, i can handle it myself, works.

I edited file in isolinux menu.lst etc - I can edit text but i do not know how run defalut choice automaticly. timout 0 does not work I spent a lot of hours reading tutorials grub/isolinux and have nothing ...

View 3 Replies View Related

OpenSUSE Install :: 11.2 - Boot Slowed By HDD Speed Testing

Aug 2, 2010

Each time I boot my opensuse 11.2 system one of the very first things that happens is that the system seems to test how fast it can handle my HDD, an older EIDE drive with the wide ribbon cable. This takes about a minute, one test each 15 secs or so until it gets down to about 33 speed and then the boot proceeds as normal.

I guess this is just the normal testing by the more advanced sata procedures in the kernel (2.6.34). If I were only booting this machine once every 6 months it would not be an issue, but I do so at least once a day. Is there any way to indicate to the system the speed of the connection so that it does not have to do the test, or close the gap a bit so that it finds the answer more quickly?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved