General :: Unable To Boot WinXP After Installing Ubuntu 10.10
Oct 27, 2010
I have ubuntu 8.10 & Windows XP installed on my PC. I formatted the C: partition and installed a new fresh copy of Win XP. After that I was not able to login to ubuntu 8.10. It is clear that Win XP overwrote the MBR. I tried to re-install the boot loader (Grub) again by boot ubuntu 10.10 CD. Finally, I was able to boot both ubuntu version 8.10 and 10.10. However, I was not able to boot Win XP. There is an entry in grun menu of ubuntu 10.10 specific for WinXP, but when I press enter to boot Windows I get back to grub menu.
View 1 Replies
ADVERTISEMENT
Sep 12, 2010
I just installed Ubuntu Remix 10.04 on my wifes MSI U100 netbook. I did a dual boot just in case she had to get into Windows for something. I let the install automatically partion (did the side by side option). Anyway, Ubuntu works fine and imported all her documents and stuff. Problem is Windows XP won't boot. The first time I tried to boot Windows XP I got a message saying the hardware had changed and I had to select safe mode, normal boot, last known good, etc... I booted normally. I got the splash screen followed by a quick flash of BSOD and a reboot. I does this no matter how I try to boot Windows (safe, command prompt, etc). Anyone have any idea what the problem is?
View 3 Replies
View Related
Oct 23, 2010
I have some proprietory softwares installed on WinXP so it is very important for my work that it is up and running.
I performed a FULL INSTALL from the Live-CD (10.10) and installed grub on the windows partition.
Now whenever I try to select the Windows option in the Grub menu, the screen goes blank and it gets me back to the Grub menu.
View 9 Replies
View Related
Sep 17, 2010
recently i installed ubuntu 10.04 from a cd to my pendrive. it worked fine but i can boot only with my pen drive inserted. i visited two more threads in this forum with same topic but no answers worked for me(i have not tried any third party mbr repair softwares). i have to go through grub to access my recovery drive which is a part of my hdd.( i do not have any command prompt options in my windows recovery console which is in my hdd. i want to be able to use grub and linux but i dont want to insert my pen drive for every boot.
View 10 Replies
View Related
Aug 12, 2011
I am new to linux and started using ubuntu and was so impressed with it that I decided to try out other distros as well. So, I installed fedora 15 into another partition and made ubuntu as default. Now fedora works fine but ubuntu doesnt.It gives error 13- unknown file system. What should I do to retain Ubuntu
View 3 Replies
View Related
Jan 29, 2011
I've been trying to setup some installation partitions made with Debian and Windows Installation CDs/Images and everything works well with the Debian, but not Windows. This is a similar setup as some Laptop companies do by putting a hidden "recovery" partition.How do I get grub to boot say WinXp/Win9x or what have you?Is there a better alternative?
View 6 Replies
View Related
Jan 8, 2011
I have tried searching for the same problem but can't find it. Close but not exact. I have a dell optiplex I use for internet surfing. I do a reformat every few months to get the junk off it.I do a reformat to clean the drive and load XP PRO then load ubuntu 7. or 8. It gives me the option to use either at start up.
I did it a few weeks ago and it has been running fine until I did updates of both XP and ubuntu. When I it fired it up Win XP worked fine but when I choose ubuntu I would get the corrupted or missing hal.dll error and it wouldnt go any further. Several reboots with the same result XP works but not ubuntu.I did a reinstall of the hal.dll file using XP disk for repair according to britec on ..... (but I didn' t do the second step yet).Now I still get the corrupted or missing hal.dll error when I try to get into ubuntu and if I choose XP it freezes. I try going into safe mode and it loads but (wireless) mouse/keyboard won't work.
View 10 Replies
View Related
May 5, 2010
I'm using ubuntu 10.04 (upgraded from 9.10) and I've also got my WinXP Toshiba Rescue CD which i'd like to install in VirtualBox but it just won't go past the 'unpacking' part. When it says that it's completed, the only option i have is clicking OK. Doing that just shuts down the VM then. And when I restart the VM, it just does the unpacking step all over again. Last year when I had a dual boot system (XP and ubuntu 8.10 i think it was), the installation went fine until I realized that my ubuntu partition was way too small. So I could not install XP in a VM. But it still got to the actual windows installation step. I'm still using the same PC the rescue CD came with.
View 9 Replies
View Related
Feb 3, 2009
I have a dual boot system - WinXP and Fedora 10. I am happy with my fedora 10, but as usual the WinXP has lots of malware on it. So I wish to reinstall it and patch it up with a AV. Is it possible to reinstall WinXP without breaking the system - becoz AFAIK, installing will remove grub from the superblock and then there will be no way to reload fedora even if it is still there. Can't I copy grub and the partition table away and reinstall it from windows after the intallation completes? That way I shall have my dual boot system back as usual if I didnot do any changes to the partition table during the fresh windows installation.
View 11 Replies
View Related
Nov 18, 2009
I am trying to use Xen tools to run multiple operating systems on my machine. The problem is that when I try to install Windows (32) XP (using "hvm" build) it crashes ! It crashes after it starts copying some files (immediately after formatting) at 18%/20%). I can't see the cause of this such a crash, I know it's a crash because I told it to restart on case. Here is my configuration file:
Code:
name="WindowsXP"
memory=256
maxmem=512
[code]....
View 4 Replies
View Related
Oct 7, 2010
I initially had Win XP Service pack 2 installed on my system. Then i installed the desktop version of Ubuntu 10.04 (dual boot). All was fine until then. I could access both. Later on, i re-installed Win XP (excessive errors). After this I'm unable to boot into Ubuntu. The option that comes at the start 'Win Xp or Ubuntu' doesn't appear at all. System boots directly into XP.
But in the Administrative Tools > Disk Management option under Win XP, there is an unknown partition of 15.3 GB. So i'm guessing Ubuntu still exists on my hard drive. Any way to bring Ubuntu back from the dead other than a re-install?
View 3 Replies
View Related
Feb 16, 2011
I can't get Ubuntu v10.10 to start on VirtualBox running under Windows XP. The installation wen smoothly. However when I try to start the machine what I see is a mere black screen... The boot order is fine. However it seems strange that no data is read from the virtual hard drive (which is about 2.15 GB):
What should I do ?
View 3 Replies
View Related
Mar 2, 2011
i have a dual boot system running Fedora14 as the main OS and WinXp as a secondary OS. On the boot up screen i choose to boot windows XP and all i get is a black screen. i am assuming the boot-loader has a small glitch and won't boot WinXp. i am stressing because i need to use MS office Access to finish a crappy school project due tomorrow.
View 7 Replies
View Related
Jul 27, 2010
I just installed the Fedora12 on my laptop, on which originally thereas only one partition with Vista before. I resized the Vista partition and made a free space and installed Linux on it.Fedora works fine, but when I try to boot Vista, it opens the system recovery options menu, without being able to do anything. After the end of each option it boots again, giving the two options between Linux and "other" and if I choose "other" it goes back to the recovery menu.
View 9 Replies
View Related
Jul 22, 2010
I have installed UEC and eucalyptus and all its packages on a single pc.there are the instruction on the site to do this..after successfully configuring all the setting when I reboot it hangs and remains in the same position.It showing error that eucalyptud-cc teminated with exit status 1 and retrying spawning etc.
View 6 Replies
View Related
Feb 8, 2010
i have installed fedora 12(from dvd) on my laptop having window 7 OS as deafult(intel processor i330)I wanted dual boot up, so I shrink the existing C partition using window using Disk Management. And then delete the newly created volume.Clean installation of fedora.But when I tried to boot window it is showing "No C drive exist".Although from linux all hardrive is coming as one file system and all data on Drive are intact i.e not data is lost.
View 5 Replies
View Related
Jan 6, 2010
I have been a happy little GRUB user for a while now, but now I want to use GRUB to boot a physically separate WinXP hard drive, and I can't seem to do that. Normally GRUB is easy, (I even have a nice splash screen of my own making). Its a champion solution for booting into Ubuntu Linux on /dev/sda5 or Win XP on /dev/sda1.
My second HD which Linux recognizes as /dev/sdb, has a Win XP boot sector and Win XP in one partition.
Normally I boot off /dev/sda using GRUB, and from Linux I can mount and have access to /dev/sdb - that works well. Occasionally however, I need to boot the separate Win XP system on the second HD, and to do that I switch the boot drive in the BIOS, but lately that is getting to be a bit tedious.
Initially I though to give the additional boot choice to GRUB, I simply had to edit /boot/grub/menu.lst and point to the second HD (where /dev/sdb = hd1 in GRUB speak). Unfortunately, when I select the new choice, it simply boots Win XP off the first HD.
I'm confident GRUB does look at the first partion on hd1 as expected as I can induce an error by having hd1 disconnected, or write silly partion numbers into menu.lst. So if it does in fact find the first partion on hd1, why doesn't it boot? Why does it default to WinXP on hd0?
I have diligently tried physically swapping SATA drive cables and playing with bios switching and have messed about a fair bit with menu.lst to make sure I have drive and partition numbers right, but all to no avail. I have also tried changing rdisk(0) in boot.ini to rdisk(1) on the second drive when it is not the boot drive.
I'm afraid the only other thing I can think of is that the second hard drive requires a Linux boot sector if I am going to boot it up from GRUB, but somehow that doesn't make sense. Surely GRUB can work across physically separate drives, so I'm open to other ideas first.
View 5 Replies
View Related
Nov 3, 2010
I have Win7 installed in my notebook, after I install WinXP, after I install Ubuntu 10.10
I need WinXP to my project...
I re-install Grub2 with live CD and the WinXP doesn't show up...
So I re-install WinXP... Re-install Grub2 and WinXP doesn't show up again...
So I custumise Grub2 and I put one line for WinXP (doesn't work)
But Now, Win7 line in Grub2 boot WinXP
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for (,msdos6)/boot/grub.
[Code].....
View 5 Replies
View Related
Mar 8, 2011
I've got an old Dell Precision 670 which has a SCSI disk. I installed 10.04 and everything worked fine - I could boot into 10.04 from the GRUB menu. I later added an IDE disk and installed WinXP Pro on it.
When I ran 'sudo update-grub', Lucid discovered the IDE disk and added a WinXP Pro entry to the GRUB menu. Now, though I can still boot 10.04 from the GRUB menu, I can't boot WinXP - the screen goes blank, and I have to hit Ctrl-Alt-Del to restart.
For what it's worth, here are the results of using boot_info_script055.sh:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
[Code]....
View 3 Replies
View Related
Apr 28, 2011
I installed ubuntu 10.10, dual boot with winxp then I ran the update manager and now I don't have the option to boot into windows.
View 5 Replies
View Related
Sep 29, 2009
I'm currently studying linux at my local college as part of Networking IT Course. We were instructed to install centos onto a VMWare virtual machine but it didn't run too efficiently on my MSI Wind and restricted my networking in WinXP. I have already got Ubuntu Netbook Release installed on the Wind alongside the WinXP install that came with the machine. However everytime i try and install Centos 5.3 in a 9640MB free space Partition it says:
Quote:Could not allocate requested partitions:
Partitioning failed: Could not allocate
partitions as primary partitions.
Not enough space left to create partition
for /boot.
View 10 Replies
View Related
Sep 25, 2009
My hard disk is a 40 gb seagate drive with 3 logical partitions - C (Win 98), D (Data), E (Win XP Home). Yesterday, I decided to format Win 98 partition and install Fedora 11 on it. I used Live USB, custom partitioned for /, /boot and swap. Installation went fine until the Add/Delete boot screen came when I got multiple Unable to mount partition errors. Then I added Win XP (which was on sda6) and restarted the system. When the system booted, I selected Win XP but it didn't do anything. It showed blank screen and then reverted to grub boot loader screen. Then I selected Fedora time and completed installation and it works fine but XP doesn't boot.
Thinking something might have gone wrong, today I reinstalled Fedora. I chose "Install over previous Linux" and this time the installation went smoothly without any errors. However it still doesn't let me boot into Win XP. It gives a "Booting into WinXP in 3/2/1 seconds" and then goes blank and keeps repeating that message.
This is the result of fdisk -l code...
View 8 Replies
View Related
Jun 17, 2010
I have winxp and ubuntu 10.04 dualboot. They were working ok. Today I removed old *21 kernel image and headers so grub updated the confs. That's all I did that could cause the win no longer boot. It starts booting, the screen goes black and the PC reboots. I tried safe mode, it started to load some dlls as it usually shows in safe mode but then still reboot.
Code:
$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
View 3 Replies
View Related
Oct 21, 2010
I originally wanted to dual install 10.10 64 Ubuntu with Windows 7 64 RAID 1 HP PC, but RAID got corrupted and I could find no fix online except using fakeraid unsupported software. The whole thing blew my muind. I gave up after 4 or so reinstalls of windows 7 to fix RAID. So I decided to install a dual boot 10.10 Ubuntu i86 with my old WinXP i86. I kept getting these errors at boot up: unknown filesystem, file not found, out of disk, no such partion and so on. I tried just about every grub reinstall I could find, including article here: "Recovering Ubuntu after Installing Windows."
After a number of tries my friend installed Ubuntu successfully, but then when I installed windows xp I am stuck here, again. I did do the Reload grub tutorials again as well. I may just give up on WinXP and have my friend reinstall Ubuntu for me.
[Code]...
View 9 Replies
View Related
Dec 6, 2010
Was running dual boot 10.10 and winxp on a MSI P4M900 motherboard. Have two HDs - one with OSs and some storage and the other purely backup for storage and Ubuntu home. Motherboard died and going to be replaced by Gigabyte G31 board. I will be using the same video, audio PCI cards and memory from old board. Should I look to a clean install of 10.10 and then bring back to life from my backup files (bookmarks, email etc) or could I plug in hard drives and boot normally? There is conflicting advice when I google - some say its OK just to boot, the kernel will sort out the new mboard drivers, others say you need a clean install.
View 2 Replies
View Related
Feb 22, 2010
WinXP Partition loading as a read only and can't fix it with PYSDM (storage device manager) Let me provide some history as to how everything was installed: From my old WIN XP hard drive I used clonezilla to clone the drive to a partition on my new hard drive for Linux. Windows is on SDA4 which is the last partition of the drive, it is mounted at sda4/windows using ntfs. I then loaded Mint 8 gnome on the 2nd partition sda2 using ext3 mounted at /, sda1 is my Linux swap, and sda3 is mounted at /home using ext3. While installing I selected to mount Linux ext3 at /
When I choose to load winXP from the grub boot loader I get dev/sda4 no such device 10CDR36778638F73. Also when I try to unmount from disk utility I get the following error: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=10CDF36778638F73 from /windows Seemslike I need to rename the drive but it won't let me in disk utility.
My Problem is that within PYSDM (storage device manager) I uncheck Mount file system (sda4/windows) as a read only but it will not stay unchecked. I have unchecked it hit unmount and mount and it still is checked to mount as a read only. This is the code in options for sda4 in PYSDM (storage device manager) nls=utf8,umask=007,gid=46
View 1 Replies
View Related
Nov 24, 2009
The time in my Fedora 12 x64 installation is 5 hours behind what it should be. When I change it to the correct time, Windows XP x64 is now 5 hours ahead! (Dual boot setup). How I can sync the times on both os's. Both are set to GMT-5.
View 4 Replies
View Related
Feb 23, 2010
I've just had to reinstall WinXP on a Dell Inspiron 1501. An ideal opportunity to try out Ubuntu. First I tried a WinXP/Hardy Heron dual boot - all seems okay. Next WinXP/Karmic dual boot - all seems okay. Then, why not, WinXP/Hardy/Karmic triple boot - all seems okay. Playing with each OS I noticed that Hardy had a couple of update notifications. So I opened Update Manager, went on-line, hit [Check] and was informed that there were 200+ Important Security Updates - I installed these. Better check Karmic too - similar story, installed 200+ updates. Everything still seems okay in WinXP, Hardy and Karmic. However, I've just noticed that the Grub2 boot menu now displays eight "Ubuntu" lines, as opposed to the four lines I had originally
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)...
[Code]...
View 3 Replies
View Related
Sep 16, 2010
I tried to help my friend install Ubuntu 10.04 side-by-side with Windows XP on his Acer Aspire One netbook.Unfortunately, the installation process came to a standstill and it quit due to "unexpected errors". The second time I started the installation, I realized that the option for installing side by side was gone and that I could not mount the C: partition on Ubuntu. The error message is listed below:====================BEGIN ERROR MESSAGE======================Error mounting: mount exited with exit code 12: Failed to read last sector (299982847): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
[code]...
View 8 Replies
View Related
Jun 7, 2010
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies
View Related
