General :: Unable To Start Windows After Installing Red Hat
Aug 12, 2009
i was using win xp sp2. i just installed red hat linux by making one of the windows drive as unpartitioned space . i kept windows as my default os .my linux is working properly , but when i goes to start windows , it shows error " windows unable to start , hal.dll file is missing or corrupt".so to solve this problem , i decided to repair windows , but when i isert win xp bootable cd , cd starts booting , after showing messege " setup is inspecting your hard ware " , black screen appears , nd nothing happens after that.what should i do ? i want keep linux as it is and also want to start my windows again . tell me how to repair windows . what should i do to boot win xp bootable cd properly.
i format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start
I have followed all the steps as mentioned on documentation.except automake (I am not clear as where to make automake)
I logged in as Root on a Ubuntu system and then
Code: cd /opt svn checkout svn://svn.lighttpd.net/lighttpd/branches/lighttpd-1.4.x/ cd lighttpd-1.4.x ./autogen.sh ./configure make make install
After this what do I need to do to be able to start the lighttpd ?After this I did not found any script /etc/init.d/lighttpd. so what more has to be done ?
I have installed windows xp (service pack 2) on my pc. later i formatted a partition (drive E and installed ubuntu linux 8.04. I have provided 2gb space for SWAP partition and remaining for root (/). I have done this manually. Installation was completed, and ubuntu asked me to reboot the system. I did so.
Now comes my problem.......I am getting some DHCP connection or some thing weird.......after that i am getting a message ......and with a message asking me to press any key.....the same thing is coming even after restarting the system....i am unable to see both windows and linux now!
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as - System ManufacturerVIA Technologies, Inc. System ModelKM266APro-835 System TypeX86-based PC
I was trying to install a couple of the sun packages to have and after the install I get the follow error. Xsession: unable to start X session--- no "/home/username/.xsession" file, no "/home/username/.xsession" file, no session managers, no window managers, and no terminal emulators found; aborting. I am now not able to log into the system at all....Can someone tell me what I've done wrong? How can a repair this?
# startx xauth: creating new authority file /root/.serverauth.18174 X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1
[Code]....
Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. Couldnt get a file descriptor referring to the console
I have download the below tar.gz then extract it , and then put it to DocumentRoot to run the index.php, but unable to use it. What program that I need to install before running it? phpMyAdmin-3.3.0-english
I have being googling and trying to find out solution to unable to startx.Please note i have already search from last 2-3 days for the solution but didn't found anything.So request someone to guide me step by step.Also one more thing, the server was crashed and i upgraded the existing server using CD. But since then we are not able to start startXI hope i can get some help here ,i am a newbie to linux but i am computer engg so i can understand some logics..I am getting below error
Code: [root@astarcftp /]# startx xauth: creating new authority file /root/.serverauth.13592
I'm basically a linux noobie, and have a problem with one of my machines I use for work. As the title states I am unable to start my xserver, using the startx command I have been using for the past 5 years. It goes to the blue loading screen with the x for a cursor, hangs there for about a min or so then goes back to the command screen. I get an error:
giving up. xinit: Permission denied (errno 13): unable to connect to xserver waiting for xserver to shut down xinit: Server error.
I have tried logging on as root and trying startx again. Same error.
I've Got one Problem with My Computer soon after success installation of when the boot-loader ask me to choose OS at CENTOS 5.4, multi boot boot-loader if i choose windows then computer tries to boot windows but fail and give the error message that there is a problem on reading the hard disk, But when i restart it and start with LINUX then computer start successful with no error message, now i do not know what to do cause i need to use Windows and all my programs are in windows..
Yesterday I thought I had solved my "Blank screen boot"-issue when I successfully got to the terminal login screen without the screen going black by booting with
Code: Linux acpi=off I spoke too soon. I found out shortly after that when trying to "startx" with acpi off gave me these errors: Code: WARNING: Error inserting i2c_algo_bit ("filepath"): No such device WARNING: Error inserting intel_agp ("filepath"): No such device
[Code]....
Then I read somewhere that booting with "i915.modeset=0" might work. So I removed acpi=off from lilo and added this, and sure enough, I got to terminal login, but I get the same errors with "startx".
I must make it clear that I can successfully perform startx when I boot without "acpi=off" or "i915.modeset=0", I am unable to see the screen but I can hear the KDE fanfare, etc.
I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
I am unable start network service on my centos box. /etc/init.d/network start device eth0 does not seem to be present, delaying initialization lspci | grep Ethernet
Doesn't show any results. It seems os doesn't identify my NIC. I am using compaq presario model pc
Per my request my son installed XP and Ubuntu(interested in learning Linux)in my computer. The installation went well and I was able to choose the system I wanted to work in from the menu. It worked for several months but now when I choose Ubuntu from the menu I longer get to the Ubuntu login screen.
Suddenly my machine not working under run level 5 and it seems to be problem with xserver and it is saying that "in last 90 seconds xserver restarted 6 times and unable to start" and then just giving blank screen.So i changed the run level to 3 and using startx command i am managing to work now.
Vmware tells me it cannot start services.I believe the issue is tied to permissions because the message indicated the log with the full details was located in /tmp/vmware-root/setup-4772.log but when I go there I receive a message telling me I do not have permission to the directory and there's a lock symbol on the directory from the File Browser utility.What do I need to do to unlock the folder and get vmware working again ?
I trying to install RALUS on my RHEL 5 os version 2.6.18-8.el5 (i386) My backup exec server is BE 2010 R2 the installation of ralus completes however with error libstdc++.so.5 missing noted that due to this i'm unable to start ralus service /etc/init/VRTSralus found a link [url] need to download compat-libstdc++-33-3.2.3-63.i386.rpm tried the rpmfind.net and as well as rpm.pbone.netid did find appropriate rpm however could not download one.
I currently dont have the cd/dvd of RHEL 5. But i need to install gcc. I have been searching all day but wasnt able to find any rpm that is related to RHEL5. I download the following file
gcc-3.0.4.tar.gz
and extracted it, Then i run the following command
[root@WAN-Admin gcc-3.0.4]# ./configure Configuring for a i686-pc-linux-gnu host. Created "Makefile" in /root/new/gcc-3.0.4 using "mt-frag" /tmp/cNf11430/cNf11430.pos: line 7: cc: command not found *** The command 'cc -o conftest -g conftest.c' failed. *** You must set the environment variable CC to a working compiler.
Now i am really hanged as what to do now. I added rpmfusion as my yum repo, i searched rpmpbone.net for gcc file for RHEL5 but it seems its not there for this version.
recently i installed ubuntu 10.04 from a cd to my pendrive. it worked fine but i can boot only with my pen drive inserted. i visited two more threads in this forum with same topic but no answers worked for me(i have not tried any third party mbr repair softwares). i have to go through grub to access my recovery drive which is a part of my hdd.( i do not have any command prompt options in my windows recovery console which is in my hdd. i want to be able to use grub and linux but i dont want to insert my pen drive for every boot.
e.g.: I don't want to use Firefox Add-ons, and I need to be logged in several places [via HTTPS in ff], but it requires several proxys (so I don't want to install e.g.: foxyproxy).How can I exactly start several Firefox instances, so that I could use several proxys?