General :: Dual Boot Missing Hal.dll File - Winxp Works But Not Ubuntu
Jan 8, 2011
I have tried searching for the same problem but can't find it. Close but not exact. I have a dell optiplex I use for internet surfing. I do a reformat every few months to get the junk off it.I do a reformat to clean the drive and load XP PRO then load ubuntu 7. or 8. It gives me the option to use either at start up.
I did it a few weeks ago and it has been running fine until I did updates of both XP and ubuntu. When I it fired it up Win XP worked fine but when I choose ubuntu I would get the corrupted or missing hal.dll error and it wouldnt go any further. Several reboots with the same result XP works but not ubuntu.I did a reinstall of the hal.dll file using XP disk for repair according to britec on ..... (but I didn' t do the second step yet).Now I still get the corrupted or missing hal.dll error when I try to get into ubuntu and if I choose XP it freezes. I try going into safe mode and it loads but (wireless) mouse/keyboard won't work.
View 10 Replies
ADVERTISEMENT
Sep 12, 2010
I just installed Ubuntu Remix 10.04 on my wifes MSI U100 netbook. I did a dual boot just in case she had to get into Windows for something. I let the install automatically partion (did the side by side option). Anyway, Ubuntu works fine and imported all her documents and stuff. Problem is Windows XP won't boot. The first time I tried to boot Windows XP I got a message saying the hardware had changed and I had to select safe mode, normal boot, last known good, etc... I booted normally. I got the splash screen followed by a quick flash of BSOD and a reboot. I does this no matter how I try to boot Windows (safe, command prompt, etc). Anyone have any idea what the problem is?
View 3 Replies
View Related
Oct 21, 2010
I originally wanted to dual install 10.10 64 Ubuntu with Windows 7 64 RAID 1 HP PC, but RAID got corrupted and I could find no fix online except using fakeraid unsupported software. The whole thing blew my muind. I gave up after 4 or so reinstalls of windows 7 to fix RAID. So I decided to install a dual boot 10.10 Ubuntu i86 with my old WinXP i86. I kept getting these errors at boot up: unknown filesystem, file not found, out of disk, no such partion and so on. I tried just about every grub reinstall I could find, including article here: "Recovering Ubuntu after Installing Windows."
After a number of tries my friend installed Ubuntu successfully, but then when I installed windows xp I am stuck here, again. I did do the Reload grub tutorials again as well. I may just give up on WinXP and have my friend reinstall Ubuntu for me.
[Code]...
View 9 Replies
View Related
Dec 6, 2010
Was running dual boot 10.10 and winxp on a MSI P4M900 motherboard. Have two HDs - one with OSs and some storage and the other purely backup for storage and Ubuntu home. Motherboard died and going to be replaced by Gigabyte G31 board. I will be using the same video, audio PCI cards and memory from old board. Should I look to a clean install of 10.10 and then bring back to life from my backup files (bookmarks, email etc) or could I plug in hard drives and boot normally? There is conflicting advice when I google - some say its OK just to boot, the kernel will sort out the new mboard drivers, others say you need a clean install.
View 2 Replies
View Related
Feb 22, 2010
WinXP Partition loading as a read only and can't fix it with PYSDM (storage device manager) Let me provide some history as to how everything was installed: From my old WIN XP hard drive I used clonezilla to clone the drive to a partition on my new hard drive for Linux. Windows is on SDA4 which is the last partition of the drive, it is mounted at sda4/windows using ntfs. I then loaded Mint 8 gnome on the 2nd partition sda2 using ext3 mounted at /, sda1 is my Linux swap, and sda3 is mounted at /home using ext3. While installing I selected to mount Linux ext3 at /
When I choose to load winXP from the grub boot loader I get dev/sda4 no such device 10CDR36778638F73. Also when I try to unmount from disk utility I get the following error: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=10CDF36778638F73 from /windows Seemslike I need to rename the drive but it won't let me in disk utility.
My Problem is that within PYSDM (storage device manager) I uncheck Mount file system (sda4/windows) as a read only but it will not stay unchecked. I have unchecked it hit unmount and mount and it still is checked to mount as a read only. This is the code in options for sda4 in PYSDM (storage device manager) nls=utf8,umask=007,gid=46
View 1 Replies
View Related
Nov 24, 2009
The time in my Fedora 12 x64 installation is 5 hours behind what it should be. When I change it to the correct time, Windows XP x64 is now 5 hours ahead! (Dual boot setup). How I can sync the times on both os's. Both are set to GMT-5.
View 4 Replies
View Related
Apr 10, 2011
I was having a dual-boot configuration, Ubuntu 10.10 and Windows 7 on the same disk. After resizing the windows 7 partition, after this screen [URL]... and after selecting windows 7 , I get "bootmgr is missing" message. Ubuntu loads normally. Here's my results.txt from boot info script:
[code]....
View 26 Replies
View Related
Mar 27, 2011
I have a Fedora / Windows 7 dual boot machine. I went to a website that explained how to do it step by step with pictures. Except now I can't boot back into windows, which I need for work.I installed grub but don't know how to find it or set options. Total Newb) Windows recovery sees my installation but tells me that there's no problem with it, and I can find files in an image. When grub comes up it offers me boot choices, but Other takes me to a screen that says, "BOOTMGR is Missing" Ctrl-alt-del to restart.
View 11 Replies
View Related
Jul 3, 2011
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
View 8 Replies
View Related
Jan 20, 2010
when i installed it the windows 7 Partition no longer works. I can see the windows 7 partition but when i click on it, it just reloads the grub boot loader. Im in college and need the windows 7 partition.
View 5 Replies
View Related
Nov 10, 2010
Just installed Lucid on dual boot machine, Linux is OK but tried booting to Windows XP from grub2, missing hal.dll (this is apparently a common problem and I found many many posts on this topic). Boot.ini contents below:
[code]....
Searching for solutions, looks like most appropriate solution is to load the Recovery Console from XP setup disk, delete boot.ini, restart the Recovery Console and run:
View 9 Replies
View Related
Feb 18, 2011
I have an Asus EEE (it has no cd drive) and I've been using Ubuntu as my primary system. I was thinking about installing Windows XP though flash drive, so that I can dump Wine. I formatted the flash to ntfs, flagged it as boot and extracted the cd's iso there. Reboot, changed priorities in BIOS and it keeps saying "Missing BOOTMGR, press ctrl+alt+del". Now, from my search it`s a fairly common problem, though all of the solutions just say to reinstall from a cd or recover from windows, what is of course not possible. Do you think it's related to only this version (XP) ? Or is it global, so the same thing would happen were I to use Win 7? From what I've read this problem is solely related to Vista/7, not to XP.
View 9 Replies
View Related
Aug 8, 2010
I got this message today after cleaning out the inside of my computer. Didn't really mess with anything. Booted into Windows XP just fine, had to restart for an update. Burg loaded, I selected Windows and I get:
"NTLDR is missing. Press CTRL-ALT-DEL to restart." WTF? Windows breaks itself. Great. My ubuntu install works just fine. I have 2 separate hard drives, with one OS on each. I can't access the other drive from ubuntu. It says
Unable to mount location Error mounting: mount exited with exit code 13: Index entry out of bounds in directory inode 5. Failed to mount '/dev/sda1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
View 9 Replies
View Related
Oct 18, 2010
I have a system with 2 hard drives. One drive (D) is my Ubuntu 10.04 system and the other drive (C) is my Windows XP system.
When I boot, I get BIOS then GRUB. If I choose the XP selection I am taken to a Boot Loader that now longer works. I get an error saying: "Windows could not start because the following file is missing. <windows root> system32hal.dll Please reinstall a copy of the above file.
Can I remove the boot loader and let Grub take me directly to the C:/windows? If so how?
View 4 Replies
View Related
Feb 23, 2010
everyone I just upgraded to windows 7 and I dual boot ubuntu 9.10 64 bit, when I installed windows I lost my boot menu,
View 1 Replies
View Related
Jul 18, 2010
I have a dual boot of Ubuntu 10.04 and Windows 7. I have 2 hard drives on the system, a 500GB and a 1TB drive.
Code:
root@akashi-desktop:~# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3e67485a .....
Since the drive (sdb2) was already mounted I was able to see "file" show up on the NTFS drive (sdb2) with the last command above. After I rebooted onto Windows 7, I found my F: drive (sdb2) showing up as a RAW filesystem. Windows 7 asks to reformat and I press NO as I have a lot of files on that drive. I rebooted onto Ubuntu again, during boot it says cannot mount to /dev/sdb2 and to press "S" to skip. I pressed "S" and saw sdb2 not mounted. I tried this command:
Code:
root@akashi-desktop:~# mount -t ntfs /dev/sdb2 /media/sdb2
NTFS signature is missing.
Failed to mount '/dev/sdb2': Invalid argument
The device '/dev/sdb2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
How to fix this drive without formatting it! fdisk shows the filesytem as NTFS so it must still be fixable I hope.
View 4 Replies
View Related
Oct 27, 2010
I have ubuntu 8.10 & Windows XP installed on my PC. I formatted the C: partition and installed a new fresh copy of Win XP. After that I was not able to login to ubuntu 8.10. It is clear that Win XP overwrote the MBR. I tried to re-install the boot loader (Grub) again by boot ubuntu 10.10 CD. Finally, I was able to boot both ubuntu version 8.10 and 10.10. However, I was not able to boot Win XP. There is an entry in grun menu of ubuntu 10.10 specific for WinXP, but when I press enter to boot Windows I get back to grub menu.
View 1 Replies
View Related
Jul 1, 2010
In my dual boot system , I am not able to boot for windos XP and getting the following message.
Booting 'XP'
rootnoverify (hd0,0)
chainloader +1
NTLDR missing
Press any Key to restart
System has redhat Linux and windows XP installed.
Quote:
/boot/grub/device.map
/boot/grub/grub.conf
/boot/grub/menu.lst
[code]....
View 5 Replies
View Related
Jun 19, 2010
This morning I attempted to 'clean' up some old files/programs from my dual mounted (Vista/10.04) laptop. All seemed ok until I tried to run Vista and I got the following:
/windows/system32/winload.exe
status Oxc000000F
missing or corrupt
I then tried to reboot into Ubuntu but it keeps trying to load windows. It looks like I have somehow lost my grub, so now I have lost Ubuntu and Vista. I tried my Vista Start Up disk and at the command prompt I entered:
Bootrec.ext /fixboot
Bootrec.exe /fixmbr
on restart it went back to the 'missing or corrupt' information. Is there some way I get get back to normal?
View 4 Replies
View Related
Jun 2, 2011
Im running ubuntu 10.10 on a dual boot machine together with vista. When I tried to delete a partition in gparted I accidentaly deleted the general partition table so I had to run testdisk on a live cd to restore it. The problem is that once I had done that and rebooted I get the message bootmgr is missing. I suppose Testdisk deleted or overwrote mz grubloader.
View 9 Replies
View Related
Jan 29, 2011
I've been trying to setup some installation partitions made with Debian and Windows Installation CDs/Images and everything works well with the Debian, but not Windows. This is a similar setup as some Laptop companies do by putting a hidden "recovery" partition.How do I get grub to boot say WinXp/Win9x or what have you?Is there a better alternative?
View 6 Replies
View Related
Sep 28, 2009
I had Windows 7 and Windows XP. It was 3 partitions in one HD (two OS' and one for files) and another separate HD (which doesn't have any system, it's just media files and stuff). When booted, I used to get the Windows 7 screen, that allowed me to either boot 7 or XP. I thought I had tested 7 enough and wanted to try Ubuntu, so I (from the Ubuntu CD which I downloaded and burned) deleted the 7 partition and made a 2GB swap partition, and, what was left, an Ubuntu partition on which I installed it.
Now when I boot I get an Ubuntu boot screen that shows several Ubuntu options and a WinXP option. Ubuntu works fine, but if I choose WinXP, I get "Error 12: Invalid device requested". I didn't change anything more than what I said. The details for the WinXP boot option seem to be:
rootnoverify (hd0,4)
savedefault
makeactive
chainloader++
What can I do to be able to boot WinXP again? (and also Ubuntu, whenever I want to). The only thing I can think of is using Windows XP CD's restore thing to restore the boot menu, but that would stop me from using Ubuntu...
View 3 Replies
View Related
Dec 27, 2009
I just installed fedora 12 on my laptop. fedora is booting and working fine, but the problem is that now windows isn't booting. when I try to boot windows i get the next message:
"BOOTMGR is missing"
I looked at /boot/grub/menu.lst, and those are the lines for booting windows:
"...
title win7
rootnoverify (hd0,1)
chainloader +1
"
then i checked with fdisk -l and verified that windows is actually installed on the second partition (sda2).the next thing i tried was to use the repair option at the windows 7 installation DVD. the problem is that when i try to preform a startup repair, the installation DVD doesn't recognize my existing windows 7 installation, and therefore wasn't able to repair it. if it's relevant, here are some more details on my machine:
HP probook 4310
windows 7 64-bit
fedora 12 32-bit
i have one sata HD which I devided into 6 partitions {a system partition of the laptop, windows 7 (NTFS), swap, /boot (ext3), / (ext4), /home (ext4)}
View 3 Replies
View Related
Sep 4, 2010
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
View 4 Replies
View Related
May 8, 2011
First off I must state that I am basically completely foreign to linux. I have 2 hard drives, one with windows 7 and storage partitions, and the other with my linux partition, linux swap, and unpartitioned space.I initially partitioned my drives with Disk Management in Windows 7. I created an NTFS partition on sda and installed Ubuntu from within Windows (a Wubi install I suppose). I originally intended to install by booting from the iso I burned onto a CD,but the installer was failing to load (fonts would change and it would error message). LiveCD was failing to load too in the same fashion. After hitting alt and tweaking the F6 settings, LiveCD successfully loaded (my very first taste of Ubuntu, albeit somewhat bland). I then decided to reinstall Ubuntu with proper linux partitions from within LiveCD. Now when I select Ubuntu in the Windows Boot Manager, a WBM screen says the file:
ubuntuwinbootwubildr.mbr is missing or corrupt. I do not know if this file is the problem or merely a symptom of it Below I have copied my Boot Summary (my apologies for the length and extra partitions):
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda[code]....
View 9 Replies
View Related
Jan 11, 2010
I have 2 Hard drives, the original 30GBs with Windows XP on it, My son put 2nd hard drive into pc as slave (400GB), no problems, WinXP recognised 2nd drive. This was all a way to give 'good ole Mum' a chance to muck about with Linux.Got a Linux Format Mag with Ubuntu 9.10 on it, amongst others, but this one I knew from previous use. I have installed it on the 2nd hard drive, not sure if I correctly (manually) partitioned but I put ( I believe) a home partition, a swap partition, left ( so I thought) a 3rd partition space, and said install. Ubuntu runs fine and see the small HD with WinXP but WinXP doesnt see the HD with Ubuntu, and I wanted to use the 3rd partition for the WinXp as I need to use that for Grant writting I do for not for profit organisations govt depts that I apply for grants from are MS freaks, that said, all runs ok but what have I done that wont let WinXP see to utilise the 3rd partition. Be kind, I have a load of senior moments these days
View 5 Replies
View Related
Oct 1, 2009
I tried to dual boot Fedora on a vista system. Now fedora boots as primary and when i try to boot vista i get the message, bootmgr missing control, alt, delete to restart.
View 10 Replies
View Related
Aug 12, 2009
My dual monitor no longer works. I downloaded the new patch for my video card and apparently the NVIDIA GeForce 8800 and Linux do not like each other?
1)Should I just remove the driver?
2)If I did would the old driver pick up because although it had a few faults, at least I could use both monitors after a lil engineering
3)If I were to remove the driver, where would I do it from?
View 5 Replies
View Related
Jul 7, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW).I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either:
[code]....
View 1 Replies
View Related
May 21, 2011
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
View 29 Replies
View Related
