I have some proprietory softwares installed on WinXP so it is very important for my work that it is up and running.
I performed a FULL INSTALL from the Live-CD (10.10) and installed grub on the windows partition.
Now whenever I try to select the Windows option in the Grub menu, the screen goes blank and it gets me back to the Grub menu.
I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. in brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:Two HDs - one is Sata and second is IDE. Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3. I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint. Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please
[Code]...
I was able to boot up the live CD and install the OS to the hard disk. *Single boot.After I rebooted, the system loads up to the Ubuntu splash screen and will "eventually" move along. The problem is that once it moves past the splash screen, it starts blacking out the screen. It looks like the screen turns on for about 10 seconds and then off for another 10 seconds repeatedly. The screen blinks like this indefinitely.This is my first attempt at installing and or using Linux so I am an uber n00b.
** Also, I am able to ctrl + alt + f1 and get to the terminal so i should be able to run any commands without any trouble.
I just installed Ubuntu Remix 10.04 on my wifes MSI U100 netbook. I did a dual boot just in case she had to get into Windows for something. I let the install automatically partion (did the side by side option). Anyway, Ubuntu works fine and imported all her documents and stuff. Problem is Windows XP won't boot. The first time I tried to boot Windows XP I got a message saying the hardware had changed and I had to select safe mode, normal boot, last known good, etc... I booted normally. I got the splash screen followed by a quick flash of BSOD and a reboot. I does this no matter how I try to boot Windows (safe, command prompt, etc). Anyone have any idea what the problem is?
View 3 Replies View RelatedI am installing Kubuntu AMD64 10.04 on a 500GB Hardware raid1. After the install completes, the computer will try booting, but grub says "No such disk."
The motherboard specs are Here,
I have tried installing to this raid three times, each returning the results mentioned above. Does anyone know what is going on?
I tried to help my friend install Ubuntu 10.04 side-by-side with Windows XP on his Acer Aspire One netbook.Unfortunately, the installation process came to a standstill and it quit due to "unexpected errors". The second time I started the installation, I realized that the option for installing side by side was gone and that I could not mount the C: partition on Ubuntu. The error message is listed below:====================BEGIN ERROR MESSAGE======================Error mounting: mount exited with exit code 12: Failed to read last sector (299982847): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
[code]...
I need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?
View 3 Replies View RelatedRecently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version:
I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
I have ubuntu 8.10 & Windows XP installed on my PC. I formatted the C: partition and installed a new fresh copy of Win XP. After that I was not able to login to ubuntu 8.10. It is clear that Win XP overwrote the MBR. I tried to re-install the boot loader (Grub) again by boot ubuntu 10.10 CD. Finally, I was able to boot both ubuntu version 8.10 and 10.10. However, I was not able to boot Win XP. There is an entry in grun menu of ubuntu 10.10 specific for WinXP, but when I press enter to boot Windows I get back to grub menu.
View 1 Replies View RelatedI have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized.
I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies View RelatedSystem is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
View 10 Replies View RelatedI had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
I want to properly install Unbuntu on my multi boot pc. I would like to install to E partition which is currently ntfs. I have never installed Linux. What drive should the boot loader go? I can format E partition during install? Does it still need a swap file partition? If so, can that be made from E partition? How big? I'd like to have a boot menu to choose Ubuntu or a choice that takes me to the windows boot loader. Would that boot loader get wiped if I did a fresh install of 7 to the I drive? Also, what would be the proper way to upgrade Ubuntu? I see a lot of post where people are doing it wrong.
Here is my drives layout. Should install Ubuntu to my SSD J drive instead? I tried the live CD. Seems to work well. I have a Asus Max Formula MB, Phenom II 6core, ATI 4870. MB has a built in Via sound card. Not sure if that was working.
Followed steps 2-5 and purged/reinstalled grub now it boots as it should, NO idea where it was messed up.[URL].. I had 9.10 running in raid1 and upgraded my hardware (cpu, mb, memory etc) and wanted to do a fresh install of 10.04 to get updated. After following the various guides online such as [URL]...It begins to load grub and drops to a "grub> " shell. Which I have to do the following to get it to boot.
Code:
set root=(md1)
linux /vmlinuz root=/dev/md1 ro
initrd /initrd.img
boot
Then it boots up normally and I can use it like any other desktop. I've been over my grub.cfg and /etc/defaut/grub files and cannot find the issue. At this point I'm wondering if the fact it's a raid1 setup is keeping grub from finding it's files.
[Code]...
Fc11 installed well, it was related to a particular sata driver perhaps The installation went well up to the reboot, and then displayed the message saying that LogVol00 was not found. 3ware sata raid card, usually it installs without error
View 2 Replies View RelatedI've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
I have been a happy little GRUB user for a while now, but now I want to use GRUB to boot a physically separate WinXP hard drive, and I can't seem to do that. Normally GRUB is easy, (I even have a nice splash screen of my own making). Its a champion solution for booting into Ubuntu Linux on /dev/sda5 or Win XP on /dev/sda1.
My second HD which Linux recognizes as /dev/sdb, has a Win XP boot sector and Win XP in one partition.
Normally I boot off /dev/sda using GRUB, and from Linux I can mount and have access to /dev/sdb - that works well. Occasionally however, I need to boot the separate Win XP system on the second HD, and to do that I switch the boot drive in the BIOS, but lately that is getting to be a bit tedious.
Initially I though to give the additional boot choice to GRUB, I simply had to edit /boot/grub/menu.lst and point to the second HD (where /dev/sdb = hd1 in GRUB speak). Unfortunately, when I select the new choice, it simply boots Win XP off the first HD.
I'm confident GRUB does look at the first partion on hd1 as expected as I can induce an error by having hd1 disconnected, or write silly partion numbers into menu.lst. So if it does in fact find the first partion on hd1, why doesn't it boot? Why does it default to WinXP on hd0?
I have diligently tried physically swapping SATA drive cables and playing with bios switching and have messed about a fair bit with menu.lst to make sure I have drive and partition numbers right, but all to no avail. I have also tried changing rdisk(0) in boot.ini to rdisk(1) on the second drive when it is not the boot drive.
I'm afraid the only other thing I can think of is that the second hard drive requires a Linux boot sector if I am going to boot it up from GRUB, but somehow that doesn't make sense. Surely GRUB can work across physically separate drives, so I'm open to other ideas first.
I've got an old Dell Precision 670 which has a SCSI disk. I installed 10.04 and everything worked fine - I could boot into 10.04 from the GRUB menu. I later added an IDE disk and installed WinXP Pro on it.
When I ran 'sudo update-grub', Lucid discovered the IDE disk and added a WinXP Pro entry to the GRUB menu. Now, though I can still boot 10.04 from the GRUB menu, I can't boot WinXP - the screen goes blank, and I have to hit Ctrl-Alt-Del to restart.
For what it's worth, here are the results of using boot_info_script055.sh:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
[Code]....
I have winxp and ubuntu 10.04 dualboot. They were working ok. Today I removed old *21 kernel image and headers so grub updated the confs. That's all I did that could cause the win no longer boot. It starts booting, the screen goes black and the PC reboots. I tried safe mode, it started to load some dlls as it usually shows in safe mode but then still reboot.
Code:
$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
I originally wanted to dual install 10.10 64 Ubuntu with Windows 7 64 RAID 1 HP PC, but RAID got corrupted and I could find no fix online except using fakeraid unsupported software. The whole thing blew my muind. I gave up after 4 or so reinstalls of windows 7 to fix RAID. So I decided to install a dual boot 10.10 Ubuntu i86 with my old WinXP i86. I kept getting these errors at boot up: unknown filesystem, file not found, out of disk, no such partion and so on. I tried just about every grub reinstall I could find, including article here: "Recovering Ubuntu after Installing Windows."
After a number of tries my friend installed Ubuntu successfully, but then when I installed windows xp I am stuck here, again. I did do the Reload grub tutorials again as well. I may just give up on WinXP and have my friend reinstall Ubuntu for me.
[Code]...
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedWinXP Partition loading as a read only and can't fix it with PYSDM (storage device manager) Let me provide some history as to how everything was installed: From my old WIN XP hard drive I used clonezilla to clone the drive to a partition on my new hard drive for Linux. Windows is on SDA4 which is the last partition of the drive, it is mounted at sda4/windows using ntfs. I then loaded Mint 8 gnome on the 2nd partition sda2 using ext3 mounted at /, sda1 is my Linux swap, and sda3 is mounted at /home using ext3. While installing I selected to mount Linux ext3 at /
When I choose to load winXP from the grub boot loader I get dev/sda4 no such device 10CDR36778638F73. Also when I try to unmount from disk utility I get the following error: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=10CDF36778638F73 from /windows Seemslike I need to rename the drive but it won't let me in disk utility.
My Problem is that within PYSDM (storage device manager) I uncheck Mount file system (sda4/windows) as a read only but it will not stay unchecked. I have unchecked it hit unmount and mount and it still is checked to mount as a read only. This is the code in options for sda4 in PYSDM (storage device manager) nls=utf8,umask=007,gid=46
I cannot boot from the OS dvd. It says looking for boot info on CDDVD then boots right into an older version of windows that happens to be on the hdd. If I unplug the hard drive I can get into the CentOS installer but this is useless because the hdd isn't viewable as a place to install the new OS. I don't know if I need to format the drive before hand so that Cent has a clean slate or if there is a problem with the DVD itself. The later I dont believe so based on the working of the installer while hdd unplugged. The DVD drive is on its own ribbon and both hdd and dvd drive or set to primary master in DOS.
Aside: I have recenlty moved to centOS formally using ubuntu and messing around with fedora on another computer. I am using cent based on work with school, they recommended cent for project with professor.
I've just had to reinstall WinXP on a Dell Inspiron 1501. An ideal opportunity to try out Ubuntu. First I tried a WinXP/Hardy Heron dual boot - all seems okay. Next WinXP/Karmic dual boot - all seems okay. Then, why not, WinXP/Hardy/Karmic triple boot - all seems okay. Playing with each OS I noticed that Hardy had a couple of update notifications. So I opened Update Manager, went on-line, hit [Check] and was informed that there were 200+ Important Security Updates - I installed these. Better check Karmic too - similar story, installed 200+ updates. Everything still seems okay in WinXP, Hardy and Karmic. However, I've just noticed that the Grub2 boot menu now displays eight "Ubuntu" lines, as opposed to the four lines I had originally
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)...
[Code]...