Ubuntu Installation :: Inspiron 1501 WinXP/Hardy/Karmic Unintentional Quintuple Boot?
Feb 23, 2010
I've just had to reinstall WinXP on a Dell Inspiron 1501. An ideal opportunity to try out Ubuntu. First I tried a WinXP/Hardy Heron dual boot - all seems okay. Next WinXP/Karmic dual boot - all seems okay. Then, why not, WinXP/Hardy/Karmic triple boot - all seems okay. Playing with each OS I noticed that Hardy had a couple of update notifications. So I opened Update Manager, went on-line, hit [Check] and was informed that there were 200+ Important Security Updates - I installed these. Better check Karmic too - similar story, installed 200+ updates. Everything still seems okay in WinXP, Hardy and Karmic. However, I've just noticed that the Grub2 boot menu now displays eight "Ubuntu" lines, as opposed to the four lines I had originally
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)...
[Code]...
View 3 Replies
ADVERTISEMENT
Feb 14, 2011
What Linux version should i get if i want to revive an old laptop? Im talking about a Dell Inspiron 1501, with a Mobile AMD Sempron Processor 3500+789 MHz, 448 MB RAM, running on Windows XP 2002 professional edition.
View 9 Replies
View Related
Apr 28, 2011
Wireless problem with Dell laptop running Ubuntu 10.10
View 5 Replies
View Related
Jun 19, 2009
I have installed F11 on my Dell Inspiron 1501. I tried to get the Broadcom 4311 wireless card to work by following the instructions for installing the Broadcom driver from this link: [url].
That resulted in the following errors when I gave the command:
Code:
I removed the broadcom-wl package and installed the autoen package from DangerMouse. After rebooting wireless works but I still get the same errors when I give the command:
Code:
I had to disable encryption on the router to connect, but I guess that's a compromise I'll have to make right now. I will work on that some more after I get these error messages straightened out:
Code:
Note that wireless does seem to be working (though without encryption) despite the error messages. And I got these same error messages with the Broadcom driver but I could not get wireless working.
View 1 Replies
View Related
Sep 12, 2010
I just installed Ubuntu Remix 10.04 on my wifes MSI U100 netbook. I did a dual boot just in case she had to get into Windows for something. I let the install automatically partion (did the side by side option). Anyway, Ubuntu works fine and imported all her documents and stuff. Problem is Windows XP won't boot. The first time I tried to boot Windows XP I got a message saying the hardware had changed and I had to select safe mode, normal boot, last known good, etc... I booted normally. I got the splash screen followed by a quick flash of BSOD and a reboot. I does this no matter how I try to boot Windows (safe, command prompt, etc). Anyone have any idea what the problem is?
View 3 Replies
View Related
Jan 24, 2010
I really want Python 2.6, which is not part of the standard Hardy packages. I just tried installing the Python 2.6 Linux distro direct from python.org. While I didn't see any error messages during the installation, I'm still defaulting to Python 2.5, and 2.6 installed to a different folder than 2.5.
A secondary wish: I would also like GROMACS 4.0 instead of 3.3. Again, Karmic has it as standard, Hardy doesn't.
I'm running dual hard drives in a software RAID1 configuration. My system is Linux only, so I have no Windoze compatibility issues to worry about.
Still, I've gathered that upgrading in the presence of RAID is different, and more problematic, than a standard upgrade.
View 1 Replies
View Related
Apr 17, 2010
I did an upgrade over the internet and on rebooting after it had completed there was no internet connection. I wired in an ethernet cable and although I can access the router and ping another machine on the network, there is no internet connection.
View 7 Replies
View Related
Sep 16, 2010
Given that 10.04 fails to work on my old pc, where do i find installs of hardy heron (which i know works) or karmic koala (which may work).
View 3 Replies
View Related
May 5, 2009
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
View 7 Replies
View Related
Jun 11, 2010
I have replaced Ubuntu 8.04 with a clean install of 9.10 In 8.04 I used to be able to print to my Canon Pixma ip1500 using the resources at [URL] In 9.10 I can no longer get my Canon Pixma ip1500 printer to work because on the one hand: Open pstocanonbj_3.3-1.1_i386.deb with GDebi Package Installer
Code:
Error: Dependency is not satisfiable: libcupsys2-gnutls10 (>= 1.1.23-1) and on the other hand:
In http://packages.debian.org/etch/libcupsys2
download libcupsys2-gnutls10
"Download Page for libcupsys2_1.2.7-4+etch9_i386.deb on Intel x86 machines"
Open with GDebi
Code:
Error: Breaks exisiting package 'libcups2' conflict: libcupsys2 (< 1.3.7-6)
View 6 Replies
View Related
Jan 5, 2010
I've had issues with the later versions of Ubuntu, so in an effort to road-test Firefox 3.5 on Hardy I'd like to change my Karmic/Hardy dual boot to a Hardy/Hardy dual boot, and follow the instructions in [URL] to put the Mozilla build of 3.5 on the new installation.
I can't see any reason why a Hardy/Hardy dual-boot shouldn't work, but does anyone know of any issues with this I might not be aware of?
View 9 Replies
View Related
Feb 4, 2010
I have an ubuntu server with a printer plugged to it through USB. I used to set the server ip on the Printing panel to print remotelly to it, but it doesn't work anymore since I upgraded to karmic. I can see the printer in the printer panel, and I can even print a test page through the panel, but I can't print from any other application. When I come to the printing screen, the printer has the message retrieving information from printer and I can't print. I guess the cups server is working well as I can print the test page, and I used to print with hardy, looks like if the changes made in the printing panel don't have any effect on the system.
View 1 Replies
View Related
Sep 18, 2010
I loaded ATI graphics driver, and it stopped Karmic from booting.I boot from Hardy GRUB, and added only the main entry for Karmic, not the recovery menu entry, so...I need to somehow reconfigure Karmic X to NOT load ATI driver, but VESA driver.edit:How do I find the Karmic GRUB? If I can point Hardy GRUB -> Karmic GRUB, then I can do Karmic recovery mode, to reconfigure Karmic X...
View 1 Replies
View Related
Apr 20, 2010
I have Hardy Heron 8.04 already on my comp and loving it, however I would also like to have Windows xp on as well, I try to install but get nothing, just directed to the sign in page for linux.
View 3 Replies
View Related
Jan 21, 2010
I reinstalled Ubuntu on my HP pc-40 computer. I used to run Hardy Heron and am now running Karmic Koala. The cd drive which had had issues for a while, broke after finishing the install, when I tried to get the cd out.I dont know if this has anything to do with it, or if my computer is too old for Karmic Koala, or if possibly the harddrive didn't appreciate being overwritten a second time - but the graphics are not working well (small squares of previous windows linger in my present browser window*)everythin is much slower, and many applications come up without a border, or their windows cant be moved with the mouse.
To top it off, while I tried to fix a bug with the terminal (no border) and uninstalled it, I couldnt install it back. So no terminal, which really makes even a newbie like me sad.If I cant solve it in a few days I will probably try to install a smaller distro via USB - I think Slax can be installed straight to USB without a live cd?
View 5 Replies
View Related
May 28, 2010
I'm currently running Hardy and XP in a dual boot setup. I want to install Lucid but don't want to overwrite my working Hardy partition and am worried by the number of reported problems with Grub2. XP is currently taking up all of my first hard drive. Second hard drive is : Hardy, then swap, then separate /home. After a bit of research, does this sound like a good plan ? ...
- Use gparted from the Live CD to shrink my Windows partition (then make sure XP still boots OK )
- Create a new partition after XP on drive 1
- Install Lucid in this new partition, using Advanced option, and tell it use my existing swap and home partitions on drive 2 (with no format, of course)
- Write Grub to this new partition
- Boot Hardy, and edit grub manually ( or use StartUp Manager, will it detect Lucid and add it as an option ? )
- Reboot and get options for Hardy, XP, and Lucid.
Does that sound correct, especially the Grub bits? When I'm happy that Lucid is OK I'll probably install Grub from it to the MBR.
View 5 Replies
View Related
Jan 6, 2010
I have been a happy little GRUB user for a while now, but now I want to use GRUB to boot a physically separate WinXP hard drive, and I can't seem to do that. Normally GRUB is easy, (I even have a nice splash screen of my own making). Its a champion solution for booting into Ubuntu Linux on /dev/sda5 or Win XP on /dev/sda1.
My second HD which Linux recognizes as /dev/sdb, has a Win XP boot sector and Win XP in one partition.
Normally I boot off /dev/sda using GRUB, and from Linux I can mount and have access to /dev/sdb - that works well. Occasionally however, I need to boot the separate Win XP system on the second HD, and to do that I switch the boot drive in the BIOS, but lately that is getting to be a bit tedious.
Initially I though to give the additional boot choice to GRUB, I simply had to edit /boot/grub/menu.lst and point to the second HD (where /dev/sdb = hd1 in GRUB speak). Unfortunately, when I select the new choice, it simply boots Win XP off the first HD.
I'm confident GRUB does look at the first partion on hd1 as expected as I can induce an error by having hd1 disconnected, or write silly partion numbers into menu.lst. So if it does in fact find the first partion on hd1, why doesn't it boot? Why does it default to WinXP on hd0?
I have diligently tried physically swapping SATA drive cables and playing with bios switching and have messed about a fair bit with menu.lst to make sure I have drive and partition numbers right, but all to no avail. I have also tried changing rdisk(0) in boot.ini to rdisk(1) on the second drive when it is not the boot drive.
I'm afraid the only other thing I can think of is that the second hard drive requires a Linux boot sector if I am going to boot it up from GRUB, but somehow that doesn't make sense. Surely GRUB can work across physically separate drives, so I'm open to other ideas first.
View 5 Replies
View Related
Mar 8, 2011
I've got an old Dell Precision 670 which has a SCSI disk. I installed 10.04 and everything worked fine - I could boot into 10.04 from the GRUB menu. I later added an IDE disk and installed WinXP Pro on it.
When I ran 'sudo update-grub', Lucid discovered the IDE disk and added a WinXP Pro entry to the GRUB menu. Now, though I can still boot 10.04 from the GRUB menu, I can't boot WinXP - the screen goes blank, and I have to hit Ctrl-Alt-Del to restart.
For what it's worth, here are the results of using boot_info_script055.sh:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
[Code]....
View 3 Replies
View Related
Jun 17, 2010
I have winxp and ubuntu 10.04 dualboot. They were working ok. Today I removed old *21 kernel image and headers so grub updated the confs. That's all I did that could cause the win no longer boot. It starts booting, the screen goes black and the PC reboots. I tried safe mode, it started to load some dlls as it usually shows in safe mode but then still reboot.
Code:
$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
View 3 Replies
View Related
Oct 21, 2010
I originally wanted to dual install 10.10 64 Ubuntu with Windows 7 64 RAID 1 HP PC, but RAID got corrupted and I could find no fix online except using fakeraid unsupported software. The whole thing blew my muind. I gave up after 4 or so reinstalls of windows 7 to fix RAID. So I decided to install a dual boot 10.10 Ubuntu i86 with my old WinXP i86. I kept getting these errors at boot up: unknown filesystem, file not found, out of disk, no such partion and so on. I tried just about every grub reinstall I could find, including article here: "Recovering Ubuntu after Installing Windows."
After a number of tries my friend installed Ubuntu successfully, but then when I installed windows xp I am stuck here, again. I did do the Reload grub tutorials again as well. I may just give up on WinXP and have my friend reinstall Ubuntu for me.
[Code]...
View 9 Replies
View Related
Oct 23, 2010
I have some proprietory softwares installed on WinXP so it is very important for my work that it is up and running.
I performed a FULL INSTALL from the Live-CD (10.10) and installed grub on the windows partition.
Now whenever I try to select the Windows option in the Grub menu, the screen goes blank and it gets me back to the Grub menu.
View 9 Replies
View Related
Feb 22, 2010
WinXP Partition loading as a read only and can't fix it with PYSDM (storage device manager) Let me provide some history as to how everything was installed: From my old WIN XP hard drive I used clonezilla to clone the drive to a partition on my new hard drive for Linux. Windows is on SDA4 which is the last partition of the drive, it is mounted at sda4/windows using ntfs. I then loaded Mint 8 gnome on the 2nd partition sda2 using ext3 mounted at /, sda1 is my Linux swap, and sda3 is mounted at /home using ext3. While installing I selected to mount Linux ext3 at /
When I choose to load winXP from the grub boot loader I get dev/sda4 no such device 10CDR36778638F73. Also when I try to unmount from disk utility I get the following error: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=10CDF36778638F73 from /windows Seemslike I need to rename the drive but it won't let me in disk utility.
My Problem is that within PYSDM (storage device manager) I uncheck Mount file system (sda4/windows) as a read only but it will not stay unchecked. I have unchecked it hit unmount and mount and it still is checked to mount as a read only. This is the code in options for sda4 in PYSDM (storage device manager) nls=utf8,umask=007,gid=46
View 1 Replies
View Related
Sep 16, 2010
I tried to help my friend install Ubuntu 10.04 side-by-side with Windows XP on his Acer Aspire One netbook.Unfortunately, the installation process came to a standstill and it quit due to "unexpected errors". The second time I started the installation, I realized that the option for installing side by side was gone and that I could not mount the C: partition on Ubuntu. The error message is listed below:====================BEGIN ERROR MESSAGE======================Error mounting: mount exited with exit code 12: Failed to read last sector (299982847): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
[code]...
View 8 Replies
View Related
Mar 18, 2011
Now, all of a sudden, after I restarted after a system update, My dell desktop inspiron hangs on boot. The kernel is: 2.6.34.8-68.fc13.i686. Not only that, but the system won't boot for any of the remaining previous kernels.
View 6 Replies
View Related
Jun 7, 2010
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies
View Related
Feb 15, 2010
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
View 2 Replies
View Related
Jan 22, 2010
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies
View Related
May 20, 2010
Has anyone got Ubuntu 10.04 working on their Dell Inspiron 1100? Most of the time, the screen goes black a short time after boot. Sometimes it goes black right after the splash screen, sometimes I get to log in and then it goes black a little later. Same results when trying to boot into "safe graphics" mode. Ubuntu 7.10 works fine on this machine (although I had to do some special configuration in xorg.conf to get it to work way back when I installed it.) However, it does not appear to be possible to manually configure X in 10.04. I tried disabling the splash screen in grub based on suggestions I found for other Ubuntu versions, but that had no effect on the problem.
Is it possible to replace X with the most recent version that could still be manually configured? Would anyone know how to go about doing that?
Alternatively, if it's impossible to get this old machine to run new versions of Ubuntu, has anyone had success with (relatively) new versions of other distros on it?
View 9 Replies
View Related
Jan 21, 2010
What's the right direction or give me step by step on how to do this?
View 6 Replies
View Related
Jan 11, 2010
I have been getting squashfs errors in the live usb created by various means(unetbootin,usbcreater,pendrive linux software).
There seems to be no error in my media or my hw. I have tried both 32 and 64 bit versions and the md5 sums of both match with the hashes given online. I havent yet tested with a compact disk, but i am sure the hw is working fine (it just booted 9.04 from usb..)
I have tried a few boot options [URL] to no avail. Also by turning off the quiet mode during boot, I see that the a few errors are "Unable to read from /dev/sdb" which should be the usb drive itself.
I will try a CD now, but my cd drive is not working. I hope to get a usb drive and boot from it.
View 2 Replies
View Related
