Ubuntu Installation :: Can't Boot WinXP Pro From GRUB Menu
Mar 8, 2011
I've got an old Dell Precision 670 which has a SCSI disk. I installed 10.04 and everything worked fine - I could boot into 10.04 from the GRUB menu. I later added an IDE disk and installed WinXP Pro on it.
When I ran 'sudo update-grub', Lucid discovered the IDE disk and added a WinXP Pro entry to the GRUB menu. Now, though I can still boot 10.04 from the GRUB menu, I can't boot WinXP - the screen goes blank, and I have to hit Ctrl-Alt-Del to restart.
For what it's worth, here are the results of using boot_info_script055.sh:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
[Code]....
View 3 Replies
ADVERTISEMENT
Jan 6, 2010
I have been a happy little GRUB user for a while now, but now I want to use GRUB to boot a physically separate WinXP hard drive, and I can't seem to do that. Normally GRUB is easy, (I even have a nice splash screen of my own making). Its a champion solution for booting into Ubuntu Linux on /dev/sda5 or Win XP on /dev/sda1.
My second HD which Linux recognizes as /dev/sdb, has a Win XP boot sector and Win XP in one partition.
Normally I boot off /dev/sda using GRUB, and from Linux I can mount and have access to /dev/sdb - that works well. Occasionally however, I need to boot the separate Win XP system on the second HD, and to do that I switch the boot drive in the BIOS, but lately that is getting to be a bit tedious.
Initially I though to give the additional boot choice to GRUB, I simply had to edit /boot/grub/menu.lst and point to the second HD (where /dev/sdb = hd1 in GRUB speak). Unfortunately, when I select the new choice, it simply boots Win XP off the first HD.
I'm confident GRUB does look at the first partion on hd1 as expected as I can induce an error by having hd1 disconnected, or write silly partion numbers into menu.lst. So if it does in fact find the first partion on hd1, why doesn't it boot? Why does it default to WinXP on hd0?
I have diligently tried physically swapping SATA drive cables and playing with bios switching and have messed about a fair bit with menu.lst to make sure I have drive and partition numbers right, but all to no avail. I have also tried changing rdisk(0) in boot.ini to rdisk(1) on the second drive when it is not the boot drive.
I'm afraid the only other thing I can think of is that the second hard drive requires a Linux boot sector if I am going to boot it up from GRUB, but somehow that doesn't make sense. Surely GRUB can work across physically separate drives, so I'm open to other ideas first.
View 5 Replies
View Related
Sep 12, 2010
I just installed Ubuntu Remix 10.04 on my wifes MSI U100 netbook. I did a dual boot just in case she had to get into Windows for something. I let the install automatically partion (did the side by side option). Anyway, Ubuntu works fine and imported all her documents and stuff. Problem is Windows XP won't boot. The first time I tried to boot Windows XP I got a message saying the hardware had changed and I had to select safe mode, normal boot, last known good, etc... I booted normally. I got the splash screen followed by a quick flash of BSOD and a reboot. I does this no matter how I try to boot Windows (safe, command prompt, etc). Anyone have any idea what the problem is?
View 3 Replies
View Related
Mar 12, 2011
I have WinXP, Ubuntu 10.04 and Debian 6.0 installed on my Desktop.
After installing my latest distro, Debian 6.0 WinXP disappeared from my GRUB menu!
Relevant details are:
root@debian-peter:~# fdisk -l Code: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
View 9 Replies
View Related
Jun 7, 2010
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies
View Related
Dec 22, 2010
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
View 9 Replies
View Related
Apr 28, 2011
I installed ubuntu 10.10, dual boot with winxp then I ran the update manager and now I don't have the option to boot into windows.
View 5 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Nov 3, 2010
I have Win7 installed in my notebook, after I install WinXP, after I install Ubuntu 10.10
I need WinXP to my project...
I re-install Grub2 with live CD and the WinXP doesn't show up...
So I re-install WinXP... Re-install Grub2 and WinXP doesn't show up again...
So I custumise Grub2 and I put one line for WinXP (doesn't work)
But Now, Win7 line in Grub2 boot WinXP
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for (,msdos6)/boot/grub.
[Code].....
View 5 Replies
View Related
Jan 29, 2011
I've been trying to setup some installation partitions made with Debian and Windows Installation CDs/Images and everything works well with the Debian, but not Windows. This is a similar setup as some Laptop companies do by putting a hidden "recovery" partition.How do I get grub to boot say WinXp/Win9x or what have you?Is there a better alternative?
View 6 Replies
View Related
Jul 5, 2011
I've installed 11.04 on my laptop (dual boot with Win7). It goes through the grub boot menu and boots in ubuntu but displays ~inch wide band near the top, nothing else. I assume it is a display issue (it has an ATI mobile Radeon HD 3870 X2 card) but can't seem to resolve problem. I can boot into Windows via the menu. In the grub menu I can boot into the command line (grub>) but can't seem to make progress beyond that. Within this grub interface, it won't take terminal commands.
View 2 Replies
View Related
May 3, 2010
It would be nice to get a sticky thread up for dual boot installation issues. It seems like this is a very common problem with the upgrade from 9.10 to 10.04.
I was finally able to solve my issue dual booting 10.04 and Windows XP Home at this thread.
[URL]
I had to reinstall Grub2 and run update-grub.
Then I had to run Rescue on my XP disk. Once to the DOS command line I ran the following command:
C:Windows>fixboot c:
I rebooted and now all is well. I can boot to Ubuntu 10.04 or Windows XP from my Grub menu.
View 1 Replies
View Related
May 7, 2010
I used to be a pro at editing Grub's menu.lst file so I could have my menu look clean, simple, and easy to read. Now that I have set up 10.04 (Working beautifully now after a couple setbacks) the menu.lst file is no longer where it used to be (/boot/grub/menu.lst)
How do I edit my boot menu now?
View 5 Replies
View Related
Feb 23, 2011
I have Windows XP SP3 running on my Desktop PC and wish to dual boot it with Ubuntu 10.10. This isn't the issue as I can do this and it gives me the GRUB menu but selecting Windows XP won't do anything - or so it seems How long should it take to boot into Windows from the GRUB menu?
View 9 Replies
View Related
Jun 20, 2011
I have installed BackTrack 5 and I have set GRUB up:
Code:
root (hd1,4)
setup (hd1)
However, the GRUB prompt appears at boot instead of the GRUB menu. However, when I boot from the Live USB, the GRUB menu works fine. Here are the contents of the grub.cfg:
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
# .....
The reason I want the GRUB menu to show up of because I would like to dual-boot BackTrack 5 with Windows 7.
View 1 Replies
View Related
Sep 21, 2010
I installed on my system "window xp" and "rhel4 update 2" but due to some problem I removed my windows xp O/S and installed that again after that grub boot menu is not coming so I can't log in properly in linux system.C
View 2 Replies
View Related
Feb 10, 2010
I seem to have determined a few other things about my "only gets as far as a GRUB command line" problem:To recap, sda3 (GRUB hd0,2) is the main Linux partition; sda9 (GRUB hd0,8) is the boot partition.GRUB is 0.92.Installation was from an 8.04LTS live CD (at least, that's what the envelope says it is)/"/boot/grub" (i.e., "/grub" on sd9/hd0,8) contains a "menu.lst" file. I modified it (had to do a "sudo gedit" from a command line!) to (1) comment out the line that hides the boot menu, (2) change the timeout from 3 seconds to 90, and (3) add a menu line based on my succesful manual IPL of DOS.
It still boots to a GRUB command line. If I do a "configfile /grub/menu.lst," a boot menu comes up. DOS will successfully IPL, but Linux still gets a "no setup signature found," (ditto for "recovery mode"), which suggests either a bad kernel, or a kernel that's too big for the GRUB to handle.Why would it be finding its way to grub, but not finding the boot menu file?Why would the live CD come up just fine, yet the GRUB and kernel it installs fail?
View 9 Replies
View Related
Nov 24, 2010
i have ubuntu 10.04 and xp installed in two different hard disc partitions. everything was fine until i came from vacation and found that after turning on my pc it gets hang as soon as the grub menu with duel boot option appears. i cant do anything at that stage, just nothing.keyboard doesn't work also. here one thing to be mentioned that for last few days my pc used to hang frequently in ubuntu 10.04 and then i had no option left but to restart my pc.
View 5 Replies
View Related
Jul 3, 2011
Changed the partition sizes = all ok
boot to F15 = ok
#grub-install /dev/sda = seemed ok but XP not shown
[code]....
View 8 Replies
View Related
Mar 5, 2009
I have a single hdd, on which I do not require windows OS, just (multiple) linux; it is just a dev mule, exploratory... Have read the saikee methods, and much more... almost there Initial installs were with mint linux 4, just used ml6
partitioned with parted magic
partition table:
Device Boot Start End Blocks Id System
/dev/hda1 * 1 64 514048+ 6 FAT16
/dev/hda2 65 2614 20482875 83 Linux
[Code]....
View 3 Replies
View Related
Mar 18, 2011
I installed F14 from my usb according to the wiki page using unetbootin. The usb boots perfectly and i get a working F14 system. I partitioned my HD with gparted and got a /,/home and swap partition, then used the installer to install the system using them. The installer finishes without a problem and ask me to reboot. When I reboot , there is a blank black screen. No grub menu , no fedora loading. I reboot with the usb and the partitions are full with the files from F14 , there is no xorg.log in the /var/log/ so f14 doesn't even start so the problem seems to be with grub.
I check the grub.conf in /boot/ , i set the timeout to 5 secs , i check that the kernel is using nomodeset (according to this wiki page there is a problem with ati), xorg.conf is using vesa as a driver and I reinstall grub with grub-install with no problems.My notebook is a acer aspire 5552 , i don't think is a hardware problem because I've used arch and opensuse with no problems in it. Fedora seems a nice distro , but this error is preventing me from using it.
View 1 Replies
View Related
Nov 29, 2010
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies
View Related
Mar 14, 2010
I'm a very new Linux user, so speak slowly and don't use big words. I installed Karmic from the Live CD. It is the only OS in use on this system. I then upgraded to Ubuntu Studio using the instructions found on the wiki.
On bootup, I get a brief message stating "GRUB loading" and then the system automatically boots to the generic kernel. No GRUB menu is ever displayed. I would like the option to boot to the real-time kernel, but I have no idea how to edit the appropriate files. I've done a fair amount of reading on the subject, but I find very little information relating directly to the real-time kernel, and so I still feel like I'm too green to do it without messing something up.
View 6 Replies
View Related
Apr 10, 2010
I learn from a BSD magazine and installed PCBSD on my Dell notebok a single harddisk with a hope to have a triple boot. I have all the three OS, but could not find the menu.lst from /boot/grub/.... All I can find is a grub.cfg which is not editable. Someone from this forum said that menu.lst = grub.cfg.
View 4 Replies
View Related
Jun 1, 2010
I did a clean installation of Ubuntu 10.04 and I found that after the computer booted, the GRUB stopped by waiting for entering command -- "grub >". The GRUB version is 1.98. I want to go directly to the GRUB boot menu after computer booted.
View 9 Replies
View Related
Jul 10, 2010
I installed Ubuntu netbook remix 9.10 and it ran fine. However, the boot menu is hidden and by default it always boots into Ubuntu (I don't know.. maybe the timeout was 0). I wanted to switch to a different kernel so I compiled a new kernel and installed it. But upon reboot it would always boot into the old kernel. So I updated grub and made the new kernel the default.
Now the new kernel is givine me a kernel panic and I can't access my system because the grub boot menu doesn't show anything (just boots into the newly compiled kernel and gives me a panic message). I don't have a recovery cd/usb. Is there a way for me to somehow slow grub down or show a menu? Pressing esc at boot doesn't help.
View 3 Replies
View Related
Jul 15, 2010
I just got a Zino HD from Dell, and was planning to use it connected to my TV, dual booting Xubuntu 10.04 and Windows 7. I did, however, run into some issues. I suspect I'm just going to have to burn a restore disc and start over, but I'd like to fix this if possible. Here's what I had to start with:
1 vfat partition (bootup?)
1 dell restore partition
1 Windows partition
Because the restore partition was a bloody 20 GB, and I could always get the restore done via disc, I reformatted it as ext4 and used it as "/". I then shrunk the Windows partition and allocated a home partition and some swap space. Note that immediately after the installer, I reformatted the home partition manually with an inode size of 128 to use with the Windows ext2 driver, but that shouldn't have really changed anything. End result file system order:
1 vfat
1 ext4 mounted as "/"
1 Windows
1 Swap
1 ext3 mounted as "/home"
I now have two problems:
1) I do not get any GRUB menu at all! It just boots directly into Xubuntu with no choices (not even memory test or restore mode).
2) I, obviously, can no longer boot Windows.
Keep in mind that this a fresh install on a brand new machine; I can't think of any reason GRUB wouldn't even show me a menu.
View 1 Replies
View Related
Apr 28, 2011
When I first boot up. I get the GRUB command line. What happened to the boot menu? And I can boot up into my Windows partition just fine. But when I try the other partitions i get "Unknown file system" or when I try to boot into the other ntfs drive, I get "BOOTMBR missing", but yet it does not mean Windows, because i can boot that just fine. I can't find my Ubuntu partition. How can I get the GRUB boot menu back?
View 1 Replies
View Related
Jun 13, 2011
I am using an old 8.04 live desktop disk
I am running meerkat 10.10 on the partition that is now ,not accessible
I dont know if i have grub or grub2
My machine boots to the grub boot menu list but its all of my old kernels that have been removed from 9.04
I have a menu list in my ubuntu boot/grub partition but they all point to 9.04, i have backups but they are the same 9.04
I have no grub2 menu list in etc/default
Can i just edit the menu list in boot/grub directory to look for my latest kernel and how should i insert it sudo?
View 7 Replies
View Related
Jun 25, 2010
Here's today's problem: I upgraded to Ubuntu 10.04 and hope to have it run alongside Win XP PRO, which it had for months.
Only, when I select WinXP in GRUB, nothing happens. Oh the screen goes dark for a few seconds, but then the GRUB screen reappears. Ubuntu 10.04 functions correctly.
here are the contents of what I assume is grub.cfg code...
What I need to know is how to make GRUB load WinXP.
View 9 Replies
View Related
