SUSE / Novell :: Services Do Not Start At Boot On 11.2
Feb 23, 2010
After upgrade of 11.1 to 11.2 I noticed that most of the services that was started in 11.1 at boot are starting now in 11.2. I check run-level of services with
Code:
chkconfig --list
And everything is as like was before the upgrade. When I start services manually everything is OK, but on restart they do not starting.
Code:
cat /var/log/YaST2/y2logmkinitrd
Kernel image: /boot/vmlinuz-2.6.31.5-0.1-default
Initrd image: /boot/initrd-2.6.31.5-0.1-default
Root device: /dev/sda7 (mounted on / as ext3) .....
View 2 Replies
ADVERTISEMENT
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Sep 17, 2010
I have a default OpenSuse 11.3 system with KDE4 and alsa and an Asrock 4coredual Sata2 motherboard with intergrated audio. I configured audio by yast2 after installation of the system, and it was working. But: anytime I re-start the system, a message pops up after start-up, asking if I really want to remove audio device this and that, and no matter what I choose, there will be no sound.
I can only get sound again by:
- running yast2,
- deleting the audio device configured,
- adding the same device, and setting the volumes again.
It is rather time consuming to manually re-configure (remove and add) audio after each system start-up.Another issue: there is absolutely no way to configure skype to be able to use the microphone input. What I speak into the microphone it goes to the loudspeakers (connected to the front speaker output), but never to skype. The only way to get skype capture mic input is to configure the front speaker as a microphone input device is skype, in which case skype captures all sounds that go to the loudspeakers, but in this case sound is overly distorted. Sometimes muting channels other than Mic and Master in kmix does not work either.
Is there a way to get a working audio in today's developped linux distributions, especially SuSE 11.3, or that is the past, like convenient file managers and useable desktop?
View 2 Replies
View Related
Sep 13, 2010
I cant start Nfs services. When I type the comman /etc/init.d nfs start I get "Not starting NFS client services - no NFS found in /etc/fstab/. I used yast to install nfs server already
View 9 Replies
View Related
Oct 23, 2010
There was an option in openSUSE about booting an installed system if grub is deleted from the MBR. This option is no longer available and there is no option for automatic recovery. For these reasons, I want to boot an installed system from command line. I know how to mount the root partition where openSUSE 11.3 is installed, but how to proceed?
View 3 Replies
View Related
Apr 4, 2010
I just installed the software for my APC UPS on my SUSE 11.2 machine. After some work I finally got it work except I have to go and start it each time I reboot. It is supposed to load automatically, but somehow mine doesn't. If I go to a command prompt as SU and type "apcupsd start" and then go look at the GUI everything shows up fine.
View 2 Replies
View Related
Aug 3, 2010
I am useing open suse 11.2 dual boot with windows server 2008. Could anybody give some suggestion do I need to upgrade to open suse 11.3. And How I can deal with that and keep my windows.
View 5 Replies
View Related
Apr 5, 2010
On installing a dual boot XP/OS 11.2 on a 40GB HDD, I had no problems with the partitioning, but now I have installed XP (15GB) and Vista (20GB), the OS 11.2 setup insists on shrinking the Vista partition to 15GB and does not allow me to change this.Have tried going into 'Create Partition Setup' and 'Custom Partition Setup' but can't seem to get Vista back to its original size
View 1 Replies
View Related
Oct 12, 2010
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies
View Related
Jan 28, 2010
OpenSUSE is starting to drive me a bit nuts. Actually what I'm trying to do is simply install VMWare server on a recent as possible SUSE and run 2 virtual machines, both the same SUSE. Of course 11.2 32 bit doesn't run VMWare server 2 so it's back to 11.1. The trouble is, 11.1 won't install properly on my PC.
The install process, booted and installed from the 11.1 network install iso image on CD, runs fine. The PC reboots from hard disk and stops at the grub prompt. I've tried the auto-repair option and reinstalled it from scratch a second time always with the same results. It seems the root partition is hosed, and that's where my understanding hits its limits. Can anyone help?
Incidentally should anyone be able to advise on the VMWare conundrum I'd also be interested. Maybe in another thread...
View 6 Replies
View Related
Jan 29, 2010
I'm having some strange problems in my system (Ubuntu 9.10 32 bits). Several services (Cups, MySQL, VirtualBox kernel driver, etc) aren't starting during boot time. It's possible start them manually (e.g. /etc/init.d/cups start). The other problem is that my virtual terminals (ctrl + alt + f[1-6]) aren't starting with the system too
View 9 Replies
View Related
Feb 17, 2010
I've been running Ubuntu 9.10 since November '09, and since a month or so I'm having boot problems. Gnome starts, but some core services such as ssh and dnsmasq (that have started on boot somewhere in time), don't start anymore. Neither does rc.local fire, so I basically have to startup these things by hand.
Also, I cannot get into the console anymore by using ctrl+alt+f*, because it gives a message like: Starting ntpd or starting libgcrypt 1.4.4, or something in that fashion.
My belief is that something is holding the boot procedure in a waiting state before services such as ssh get to start, but I can't seem to find anything in the log files.
View 3 Replies
View Related
Nov 7, 2010
Whenever I start up my laptop running Fedora 14, I notice that it says that it is failing to connect to my default wireless network since the wireless card is not activated. Since it appears that the wireless card is not activated until the NetworkManager service is started, is there anyway for me to set NetworkManager to start before this check is made? Boot message log is attached. [URL]
View 1 Replies
View Related
Oct 31, 2010
We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.
We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:
We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.
View 4 Replies
View Related
Oct 14, 2009
I need to start an application (graphical) when the PC start, even before anybody login, and use/launch a specific user. Now only can do this manually; when gdm starts, switch to any text tty [ie. Ctrl + Alt + F1], then I login into the special user, start a X server, export the DISPLAY environment variable, and start the application.
With this steps:
Code:
$X :1 -verbose -nr -nolisten tcp &
# Maybe Metacity -> $ metacity
$export DISPLAY=:1
$JavaApp &
Now i need put this steps (script) in some place to launch the app automatically, and with and specific user [ie. manager].
How can I made it? Maybe in init.d? or an special xinitrc? And how can start the app with the specific user? And, if is possible, who can stop the app when the system going turn off? I have Debian 5.0 and a beginner knowledge of shell script.
View 5 Replies
View Related
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Nov 18, 2010
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies
View Related
Sep 8, 2010
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Nov 4, 2010
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies
View Related
Aug 23, 2010
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
View 2 Replies
View Related
Feb 1, 2010
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
View 3 Replies
View Related
Oct 13, 2010
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies
View Related
Jul 19, 2010
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies
View Related
Feb 4, 2010
The software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
View 4 Replies
View Related
Oct 25, 2010
I have been searching for 2 days and cannot find an answer. Apparently Sax2 isn't available in 11.3. It looks as if many are having the same difficulty. I've tried xrandr and tried to edit /etc/X11/Xorg.conf with no success.Copying a working xorg conf file might be a fix, I don't know.
View 8 Replies
View Related
Oct 4, 2010
I use Termlite from SCO as my terminal emulator. It works on SUSe 9.3 but i can not get it working on 11.3. How do I enable the networking for this in SUSE 11.3.
View 1 Replies
View Related
Nov 19, 2010
to get flash 10 working. I just decided to update to 11.3. Bought a 8.0GB USB stick to copy files to. USB DISK icon on visible on Desktop. mounted on /media/USB DISK Clicking on device properties it is read only. I can change permissions but that is only temporary. Looking under my computer it is formated as vfat device name is /dev/sdb
I can't copy any files to it. Can't see in terminal even being root as well. Almost started the Partitioner in Yast but didn't want to accidently crash the system. That WOULD be my luck Can't find a way to format it via GUI interface. Can I use something like fdisk in terminal. I guess I need to format it as ext3.
View 7 Replies
View Related
Feb 18, 2010
I have SuSE 11 box. I notice that there's an entry in /etc/services that shows windream running on port 534. Can someone tell what is windream? I tried to google but it keeps bring up German website or something.
View 1 Replies
View Related
Jan 9, 2009
I accidently removed bottom panel of suse 11.1.Please be so kind to help me to get it back my bottom panel.
View 6 Replies
View Related
