General :: Strange Message When Starting Computer?
Sep 20, 2010
This puzzling message pops up during startup and forces a reboot:
Code:
Checking root filesystems. fsck.ext3: No such file or directory while trying to open /dev/hda1 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem, then the superblock is corrupt. This was typed in not copied.
The laptop is running gentoo linux. Here is the fstab file and instead of having "boot" on its own partition I decided to have both "/" and "boot" in the same partition. This has never caused any problems before so I don't understand what the problem is now.
[Code]...
View 8 Replies
ADVERTISEMENT
Jun 22, 2009
I recently reinstalled CentOS, and after a ton of updates, I'm just about finished getting things set up again. However, today I've noticed this really interesting message whenever I run yum. Just for demonstration, I'm going to remove gnome-screensaver, since I prefer the Xscreensaver anyway. This is the complete output, with the strange message highlighted;$ sudo yum remove gnome-screensaverLoaded plugins: fastestmirrorSetting up Remove ProcessResolving DependenciesThere are unfinished transactions remaining. You might consider running yum-complete-transaction first to finish them.
--> Running transaction check
---> Package gnome-screensaver.i386 0:2.16.1-8.el5 set to be erased
--> Finished Dependency Resolution
[code]....
View 2 Replies
View Related
May 17, 2010
For some reason whenever I load gnome-terminal using 9.10 I get this message:
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
View 4 Replies
View Related
Jun 29, 2010
I use Lucid x86_64. Lately I have been getting the following message referencing the mounting of my flash drive on start-up: "The disk drive for /media/UDISK is not ready yet or not present. Continue to wait; or Press S to skip mounting or M for manual recovery." I hit skip and and Lucid continues to boot fine, and the flash drive is mounted and working properly after booting. How can I get rid of this message?
View 2 Replies
View Related
Jun 6, 2011
Notice the red-colored band that appeared on the top of this webpage while I was surfing the web.What does this mean? I cut and pasted the band bigger so you can see it better and what it says. I checked for the file on /home but I found nothing. I feel this is threatening my Ubuntu.
View 5 Replies
View Related
Jul 18, 2011
I installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
View 1 Replies
View Related
Jul 8, 2010
When I run dmesg I get
Code:
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
Does anyone have any idea what that means?
Fedora 12 Gnome 2.28
View 2 Replies
View Related
Oct 18, 2010
I use Debian Lenny on desktop. On bootup I get this strange message
Code:
Question one: what is hub 2-0:1.0? A utility? A library? A module?
Queston two: what does "enumerate" mean in this context?
Question three: I can't figure out what "port" is meant: a networking port something on the motherboard one of several I/O port/connector/sockets on the back of the computer? (Hope you know what I mean--- you stick USB connectors into them to connect your computer to a USB device, such as a USB mouse.) the one and only networking port/connector/socket on the back of the computer.
Possibly relevant: I sometimes but not always have a USB cable connecting my printer to one of the USB ports/connectors on the back of the computer at boot time. But the message always refers to "port 1", never 2,3,4. due to lack of options for getting on the Net, I use an Actiontek router which demands to be given 192.168.0.1 which would otherwise be taken by my computer, which instead gets 192.168.0.2. (Grasping at straws...)
View 5 Replies
View Related
Feb 16, 2009
I recently installed Antix Mepis 8M on Dell Latitude D410 laptop. Everything is fine except that at boot I get the following weird message: pci 0000:00:1e.0: BAR 7: can't allocate I/O resource [0x10000-0xffff]
It doesn't noticeably slow down the boot and everything works fine once running, but I'm curious to know what it might be and whether it could possibly represent trouble in the future.I googled it and found this: http:[url].....But there is no associated solution, and other results are largely reposts of this query.
View 3 Replies
View Related
Dec 22, 2010
i am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Replies
View Related
Jul 22, 2011
I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 Replies
View Related
Nov 22, 2010
I am trying to share files between Windows XP machine, ubuntu server, debian server and ubuntu desktop. But mainly between ubuntu server and Windows XP computer.I also like to learn samba, because probably I could do all this with ftp server as well.I set up and configured samba following the instruction on Online Ubuntu Server Guide.But when I run the command:sudo /etc/init.d/samba restartI get:bash: /etc/init.d/samba: No such a file or directory I don't know what is wrong?
View 9 Replies
View Related
Aug 18, 2010
When I start acroread (and as far as I can tell it's only that program), I get the error message
But the program still starts, no problem. Happens with both
View 2 Replies
View Related
Mar 13, 2011
I usually run my updates every Friday, my last good update was 4-Mar-2011. I could not update this week and got an error -"PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Raw/openSUSE_Tumbleweed_standard/'"I get a similar error message when starting Yast Software Management.Is this related to the 11.4 release? I'm waiting for fewer bugs before I upgrade to 11.4, so I'd like to be able to keep current with 11.3.
View 3 Replies
View Related
May 21, 2011
I was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
View 6 Replies
View Related
Dec 3, 2010
Last week my computer crashed while using Adobe flashplayer, when I restarted my computer I get a black screen with an error message:
View 2 Replies
View Related
Jun 12, 2011
This is a strange one. Ever since upgrading to 11.04 64-bit, I've had this problem and I've just been dealing with it...
After the machine posts, grub presents itself. Before upgrading, it would timeout after 5 seconds and boot the first/default entry. Since the upgrade, it no longer automatically boots the first entry. In addition, it reboots the computer after selecting the first entry. After it comes back up to grub, you select the first option and this time it boots.
I'm pulling my hair out on this one. I'm by no means a Linux expert, but I've been running Ubuntu for a few years now and this is one of the first issues that I've been unable to work through.
View 9 Replies
View Related
Jun 2, 2010
I want to mount partitions automatically after starting computer...currently i hav to click on the partitions and mount them.
View 9 Replies
View Related
Mar 31, 2011
I have openSUSE 11.4 KDE 64 bit. openSUSE is really great, but I hate the freeze when I startup my computer. Desktop appears but I cannot do anything. This takes approximately 20 to 30 seconds and than my plasmoid-networkmanager shows network is up. As from this moment freeze is over.
I already tried to switch off ipv6 and put nomodeset in grub, though this is not helping. Does anyone have any idea what this is and how I can solve this?
View 3 Replies
View Related
May 31, 2009
if i want to send a message to another computer? or get access to another system? what computer knowledges should i know? or what techniques should i learn?
View 2 Replies
View Related
Mar 6, 2010
Where are temporary internet files stored so as that I can delete them. A second point is that I have had Ubuntu for a few months now and my computer is starting to slow down.
View 2 Replies
View Related
Oct 1, 2010
In windows we used to send a pop up message to another computer that is connected in home network using the following command,
Code:
Netsend [username] "message"
what is the equivalent command in ubuntu..?
View 4 Replies
View Related
Jun 15, 2010
I would like to send a pop-up message to a computer using its ip address which is connected online,how it can be done..?
View 9 Replies
View Related
Dec 14, 2009
My fedora 11 (2.6.30-102) spends a long time while initializing services on
"Starting system message bus:"
---------- Post added at 08:47 PM CST ---------- Previous post was at 06:33 PM CST ----------
Auth is LDAP.
There's a 3.5 years old bug in redhat bugs database, that's still not resolved,regarding dbus trying to use ldap auth, before ldap service is started.Workaround is to change ldap config to soft binding.
3.5 years for a bug that affect enterprise users - are you there redhat?
View 2 Replies
View Related
Sep 19, 2010
I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies
View Related
Jan 3, 2011
I installed on this laptop two OS : Windows XP SP3 with drivers for M11 from Toshiba download site Fedora 14 64 bits I have no problem running Windows but sometimes when I run Fedora I hear fan starting to run at full speed then computer hangs. When this occurs, I must power off it using switch then reboot and I lost my work. I try to run Memtest86 during a full night and I did not get any error or hang.
Is there somebody who already installed Fedora 14 on Toshiba Tecra M11? kernel is 2.6.35.10-74.fc14.x86_64 and my graphic card worked fine with hardware acceleration out of the box.
[Code]...
View 4 Replies
View Related
Feb 2, 2011
My computer recognizes the printer and has no trouble printing out any documents. The printer can scan papers to a memory card and makes copies just fine too. But when I select "Scan to PC" I get the message "Try scan from computer or see documentation. Press OK." Of course, the printer included next to no documentation, only the basic plug-it-in-and-turn-it-on instructions. Simple Scan said that it did not find a scanner.
View 8 Replies
View Related
Jun 17, 2011
I have installed vnc-server on my CentOS 5.6 virtual machine. I can connect to it with a java web browser so it seems to be working. However, I get the following error message when I start, stop or restart the vnc-server process. Quote: Starting VNC server: 1:ken xauth: timeout in locking authority file /root/.xauthkk661q
View 5 Replies
View Related
Nov 16, 2010
Today, I finished assembling my dream computer. I can boot it into the BIOS, and I checked that everything was working correctly through there. Anyway, I attempted to transfer the hard drive from this computer to that one. This computer is a Dell (blech) Optiplex GX280 with an Intel processor and integrated graphics. The new one has an AMD Phenom II processor with an ATI card and an ASRock motherboard (drastically different machines, I know...) When I try to boot, GRUB gives me an error message that says something like:
Code:
blah whatever cannot find /dev/disk/by-uuid/372de761-9577-48be-ba19-c6b2890cb229
Did I do something wrong installing the hard drive? Or is this a problem that is going to happen no matter how hard I try to make it not happen? If the second is true, will it help if I wipe the disk and reinstall Ubuntu on the new computer?
P.S. I know similar threads about transferring hard disks have been posted, but no thread has mentioned this error.
View 4 Replies
View Related
Mar 3, 2010
Started slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
View 14 Replies
View Related
