i am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Repliesi format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start
View 2 Replies View RelatedI've updated a Fedora Core 3 server to Fedora 11. The old FC3 had an external modem attached for when we felt like dialing in for a ppp connection.
I've replicated login.config, mgetty.config and dialin.config from the old server and had to put a RS232-to-USB adapter on the modem.
I've test connected to the server and everything look fine.
I'm have a difficult time starting the Getty session from inittab.code...
I have installed cpulimit tar archive software on my suse linux DesktopI can limit any process upto a max cpu percentage uses with its pid with below command.# cpulimit -p <pid> -l <percentage>It is working i have tested.But when i run this command for a executable script with following command# cpulinit -e /<path with script file> -l <percentage>it shows message "Warning: no target process found. Waiting for it." though thatscript is running at that time.what could be the issuse.How can i rectify that problem
View 2 Replies View RelatedThe default setting of linux is run level 5 (Red Hat 9) I want to use my system in Runlevel 1. For that purpose i 1st check the permission which were
-rw-r--r--
I want to edit the File " vim /etc/inittab " in the terminal . which line should i edit so I may use it in a single mode.
2-The second thing i want to ask that before editing any important file which are /etc like "inittab" can i 1st make it's copy and keep it in my home directoty so,in case of any mistake I can get my original file?
During my several experiment on linux I accidentally put the default runlevel to the value 6..thus before starting its going to restart ..currently running mint 9. there is only one way that somehow i can edit that file from grub command line.
View 4 Replies View RelatedUnder Place> Documents, Music,Videos, etc. I get the msg file not found. My son set this computer up for me.
View 1 Replies View RelatedI've updated a Fedora Core 3 server to Fedora 11. The old FC3 had an external modem attached for when we felt like dialing in for a ppp connection. I've replicated login.config, mgetty.config and dialin.config from the old server and had to put a RS232-to-USB adapter on the modem. I've test connected to the server and everything look fine.
I'm have a difficult time starting the getty session from inittab.
/etc/inittab:
Code:
id:5:initdefault:
si::sysinit:/etc/rc.d/rc.sysinit
l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
[Code]...
1. I am using CentOS 5.4 and I try to use inittab at the etc/inittab to initiate a program at startup
2. Below is my script and saved as heritrix.sh
#!/bin/bash
export HERITRIX_HOME=/root/heritrix-1.14.3
cd $HERITRIX_HOME
chmod u+x $HERITRIX_HOME/bin/heritrix
$HERITRIX_HOME/bin/heritrix --admin=LOGIN:PASSWORD --port=9090
3. I did the chmod +x for the permission already.
4. I not confirmed whether it is running at startup.
5. the script is no problem as I have check it
I want to change File NOT FOUND ERROR MESSAGE to my own message buw how come I do this by terminal ?
View 3 Replies View RelatedI am trying to compile meep (http://ab-initio.mit.edu/wiki/index.php/Meep) with MPI (openmpi) on a RHEL machine. I was able to build the binaries, but when I try to execute it, this error message comes up. I don't know which file libguile is missing. It was installed from the official rpm repository cdrom.
ERROR: In procedure dynamic-link:
ERROR: file: "libguilereadline-v-17", message: "file not found"
The last lines of the strace massage says:
access("/usr/lib/libguilereadline-v-17.so", R_OK) = 0
open("/usr/lib/libguilereadline-v-17.so", O_RDONLY) = 16
read(16, "177ELF111331`21004"..., 832) = 832
[code].....
I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
I faced a problem while installing ubuntu 10.04 on mylaptop;i downloaded the ubuntu from ubuntu official site. Problem: message coming that no media device is found for live file system. My Laptop configuration : 2.2 ghz core 2 duo processor, 320gb hdd in this matter and can let me know me how can i install ubuntu 10.04 on my laptop.
View 4 Replies View RelatedWhenever I try to boot my computer, GRUB (Version 2) says "File Not Found". It does this for all entries except the Memtest86+ entries, which work fine. I have tried reinstalling GRUB, but it still does the same thing.
View 6 Replies View RelatedI tried to go to the inittab folder by typing /etc/inittab.
The following is the error message I get
[root@localhost /]# cd /etc/inittab
-bash: cd: /etc/inittab: Not a directory
Started slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
View 14 Replies View RelatedThis puzzling message pops up during startup and forces a reboot:
Code:
Checking root filesystems. fsck.ext3: No such file or directory while trying to open /dev/hda1 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem, then the superblock is corrupt. This was typed in not copied.
The laptop is running gentoo linux. Here is the fstab file and instead of having "boot" on its own partition I decided to have both "/" and "boot" in the same partition. This has never caused any problems before so I don't understand what the problem is now.
[Code]...
I want to install ubuntu 10.10 alongside XP but all the CD's don't start (the CD's are The linux format magazine DVD and the 10.10 CD). When I install ubuntu via Wubi, if I ubgrade from 10.4 to 10.10 I can't star up Ubuntu and it gives me this eror mesage "eror: file not found".
View 9 Replies View RelatedI'm stepping out with LDAP for the first time. It's up and running. My Question is really closer to DB4, the Berkely database. When I start the ldap service I get this output:
# service ldap restart
Stopping slapd: [ OK ]
Checking configuration files for slapd: bdb_db_open: Warning - No DB_CONFIG file found in directory /var/lib/ldap: (2)
Expect poor performance for suffix dc=example,dc=com.
config file testing succeeded
In centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option
Same error while starting the httpd service.
I am trying to Upgrade from Fedora 12 to Fedora 13 using Preupgrade. My system downloads the the Upgrade and tries to install it but returns a message "Root of the previous system not found". I would really like to fix this problem but dont know how.
View 1 Replies View RelatedI need to use a pendrive with the Slackware 13.0 and I've tried a lot of things I've found at the internet but unfortunately they didn't work. It's not possible to use graphical interface because some reasons. So the problem need to be solved by command line.
When I use "lsusb" command, I can see the pendrive.
However, when I try these:
I got the following message: "Module usb-ohci not found" and "Module usbcore not found"
How can I deal with these problem? Because I guess without these module loaded it's not possible to mount the pendrive. Is it right?
Recently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....
"No volume control GStreamer plugins and/or devices found"
I am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
OpenSuSe fail to start if loading on fail safe following msg appears
blogd: no message logging because/var file system is not accessible
I have run defrag through XP
Any time I watch a screencast dealing with notifications, there are always multiple of them on the screen. But when I have a program that uses them it always just allows one at a time.
View 10 Replies View RelatedJava is installed in linux machine and when I enter the command java -version it shows java is not found.At the same time when i run from the folder where its installed with ./java -version it works.
first of all why its not working from any other place? also why do I need to give ./ from the folder?
I upgrade my f13 to f14 with preupgrade but after that i give this boot message.how can i fix this error?
Code...
how can i fix this error?
I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 Replies View RelatedI have windows 7 and ubuntu karmic dual boot system.i can easily transfer files via bluetooth in windows 7 but in ubuntu it shows a message bluetooth adapter not connected while as i dont use any such adapter while working in windows .
View 4 Replies View Related