I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies
I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#
I am using fedora9 server I installed & configured httpd ,mysqld & heartbeat service its well and running but every 10 to 15 days httpd service is stoped when I tried to start the service
I am getting this below error:
#sudo /sbin/service httpd start
Starting httpd: [Mon May 09 09:03:07 2011] [crit] (17)File exists: Failed to create shared memory segment for backend 'XXGLOBAL'
I checked httpd pid
#ps -ef |grep httpd
526 7553 7194 0 09:06 pts/0 00:00:00 grep httpd
I googled and run below the commands:
#ipcs -s | grep apache
I didn't get any out put:
#ipcs -s | grep apacheipcs -s | grep apache | perl -e 'while () { @a=split(/s+/); print `ipcrm sem $a[1]`}'
deprecated usage: ipcrm {shm | msg | sem} id ...
usage: ipcrm [ [-q msqid] [-m shmid] [-s semid]
[-Q msgkey] [-M shmkey] [-S semkey] ... ]
deprecated usage: ipcrm {shm | msg | sem} id ...
usage: ipcrm [ [-q msqid] [-m shmid] [-s semid] .....
I got the out put below like I wait 5 to 10 min but the proses will going on I killed the process I tried to start the service but I got same error. When I restarted my O/S the problem is rectified but every 10 to 15 days same problem I am getting.
I checked http error_log file:
# tail -f /var/log/httpd/error_log
[Mon May 09 09:46:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:48:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:50:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:52:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:54:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
View 1 Replies View RelatedI configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.
View 1 Replies View RelatedI m using apache http server for hosting a website.
Whenever i start httpd service 8 apache processes get triggered . Is it normal? Is apache is default application server like IIS in windows?
Quote:
top - 15:49:15 up 8 days, 22:53, 3 users, load average: 0.73, 0.77, 0.91
Tasks: 125 total, 1 running, 124 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.8% us, 8.0% sy, 0.0% ni, 91.2% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 2064720k total, 2017072k used, 47648k free, 204452k buffers
[Code]....
I rebuilt my box with Fedora 14. installed httpd, mysql php etc. when I tried to start my httpd it was giving me error about finding the root document and server name I was able to fix temp the issue with the name by placing ServerName 192.168.1.105:80 in the httpd.conf file and the root document somehow was fixed also. but I am still can't start the httpd and no error message except that it failed. I also disabled Selinix but still no luck.
View 11 Replies View RelatedI have opened up the Service Configuration window that shows all the services and their status. My httpd says that it is enabled, but also that "this service is dead" and there is a orangish triangle. I can run phpMyAdmin on my server, but I can't run it from any other PC on my network.
View 13 Replies View RelatedHas anyone noticed that when using NameVirtualHost's in apache that the service httpd restart command is broken?Also it seems system-config-bind has glitches too.
View 10 Replies View RelatedF15 x86_64
I can start this from the command line and it shows no errors.
httpd -t --- syntax ok.
no entry in the httpd error logs.
chkconfig reports it as on.
service --status-all shows this --
httpd.service - LSB: start and stop Apache HTTP Server
Loaded: loaded (/etc/rc.d/init.d/httpd)
Active: failed since Wed, 01 Jun 2011 07:06:18 +0100; 58min ago
Process: 1152 ExecStart=/etc/rc.d/init.d/httpd start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/httpd.service
After a reinstall I finally caught this in /var/log/messages
systemd[1]: Unit httpd.service entered failed state
The httpd.service file does not exist on the system. Where can I get a copy?
Alright, so I upgraded my old fedora 10 server to Fedora 11 with a netinstall CD, but now service httpd restart is broken. I already had to delete the old config file and reinstall apache, but now I can't restart it. I can kill it and then start it manually, but it never stops the running instance and fails to bind the port. I know it's because /var/run/httpd/htpd.pid is in the wrong place, which would be /var/run/httpd.pid, but do I have to make a symlink every time I want to restart it? I edited all the config files to point to the right place, but the system does not honor them. What do I do?
View 3 Replies View Relatedwill the command service httpd restart the apache service if i enable httpsd service in graphical mode
View 12 Replies View RelatedI have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I'm new to Apache configuration so could be misunderstanding but shouldn't the characters highlighted in red below be removed?
Code:
accidentally I do something wrong with my server and the httpd folder missing and I need it to setup my mail server and anyone can help me what can I do without reinstalling my Cent OS? Here is the error msg :
[root@mydomain etc]# service httpd stop
Stopping httpd: [FAILED]
[root@mydomain etc]# service httpd restart
[code]....
We are using this url on our testing box and this ip is reverse proxy IP ( 10.192.64.52)
Without reverse proxy:- URL is working fine.
http://10.192.16.77/akc-qa/arsys/ser...TS000000001430
But with reverse proxy its putting escape [%25] in between %3a
[url]
Is it possible to write a rewrite rule to bypass escape [NE] for this particular URL?
On this system httpd does not start on boot. I can manually start it without errors with service httpd start.
Code:
chkconfig --list httpd
httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
Where do I look to see why it wont start?
[root@itsupport ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs [FAILED] Iam facing the above error when i restart the service httpd
I have just installed Fedora 11 on a "fresh machine" and everything works ok, except for Apache httpd
the message seen in the error_log is the following: Name or service not known: mod_unique_id: unable to find IPv4 address of "myserver"
I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
I neded to make some changes to the httpd.conf file. Afterwards I tried restarting,but it won't restart.It's saying port 80 is already in use. after checking via lsof -i :80 I get this result:
[Code]...
My mail server is getting problem since 3 days. It automatically get hang and httpd service get dead any time. How I can check what is effecting server, load, network traffic etc...
View 13 Replies View RelatedI have task to do configure a two httpd service in a same linux machine using iptables.
For example: Run primary httpd instance on 80 and 443 port if primary instance is down switch to second instance running on 8080 and 4443 this can be achieved using iptables.
Well, i can not install httpd service, when i execute yum -y install httpd i get this message
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=i386&repo=os error was
[Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')>
Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again
I have reviewed the HowTo wiki on Setting up an SSL secured Webserver with CentOS [URL], and have successfully set up my server.
We are using the conditional <IfDefine SSL> tags around the <VirtualHost _default_:443> section. I wanted to do this because we are deploying a standard <VirtualHost> section that is appended to the httpd.conf file for several Apache versions on several OS's, and this makes maintenance much easier. Sometimes the server will be configured with SSL support, and sometimes not, depending on certain functions of our application that the end user will require and determine. Our application then determines which mode the server should be run in depending on these functions, what OS is being run, what version of Apache is being run, etc, and starts the httpd server in the appropriate mode. For CentOS 5 with Apache 2.2, if the application indicates SSL is required (and we expect the server to be configured appropriately), then we do the following:
/usr/sbin/apachectl -D SSL -k start
Running CentOS 5 x64 And today my httpd is running very slow and I can't find a fix. Looked all over different forums
When starting httpd I get the message: /var/lock/subsys/httpd': No space left on device I checked that directory above and there is no file called httpd tried rebooting server
Can't do updates too:
[root@u15438957 ~]# yum update
Loaded plugins: fastestmirror, priorities
rpmdb: unable to join the environment
[Code]...
For the first time in installed and configured centos-ds from this HowTos and from the manuals.It is running nicely but disabled my httpd.Is it not possible to run directory service and httpd in the same machine
View 3 Replies View RelatedI installed centos 5.5 and httpd service was working well for the last 2 weeks till yesterday. I restarted server and noted my hosting service were not working. I have tried service httpd restart on the terminal and it dispalys [FAILED]. I updated my machine and and have tried restarting it but it doesn't work. I am new to centos and I dont know how to solve this.
View 2 Replies View Relatedroot@HOST [~]# /etc/init.d/httpd start
Starting httpd: no listening sockets available, shutting down
Unable to open log [FAILED]
root@HOST [~]# /etc/init.d/httpd restart
Stopping httpd: [FAILED]
Starting httpd: no listening sockets available, shutting down
Unable to open logs [FAILED]
root@HOST [~]# tail -n 10 /var/log/messages
Sep 29 17:59:30 localhost avahi-daemon[2870]: New relevant interface wlan0.IPv4 for mDNS.
Sep 29 17:59:30 localhost avahi-daemon[2870]: Joining mDNS multicast group on interface wlan0.IPv4 with address 196.219.240.236.
Sep 29 17:59:30 localhost avahi-daemon[2870]: Registering new address record for 196.219.240.236 on wlan0.
Sep 29 17:59:31 localhost avahi-daemon[2870]: New relevant interface wlan0.IPv6 for mDNS.
Sep 29 17:59:31 localhost avahi-daemon[2870]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::223:cdff:fecb:9c5e.
Sep 29 17:59:31 localhost avahi-daemon[2870]: Registering new address record for fe80::223:cdff:fecb:9c5e on wlan0.
Sep 29 17:59:31 localhost NetworkManager: <info> (wlan0): device state change: 7 -> 8
Sep 29 17:59:31 localhost NetworkManager: <info> Policy set 'Sunsoft1' (wlan0) as default for routing and DNS.
Sep 29 17:59:31 localhost NetworkManager: <info> Activation (wlan0) successful, device activated.
Sep 29 17:59:31 localhost NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
What is the problem I have a local server
CentOS Linux
I am using CentOS 5.6 with Apache 2.2.17. The Apache was compiled from source using RPM build to comply with PCI requirements. Also Plesk 9.3 is used as a control panel, but other than the config files the Apache is pretty standard. When the httpd is started, there are no errors reported in /var/log/messages or in the error_log, and the httpd starts, shows up in ps and the pid file exists in /var/run/httpd.pid.
However when you check the status 'service httpd status' you get 'httpd dead but subsys locked'. You can add websites normally, and the proper config files are generated so I am pretty sure this isn't a control panel issue as I have other servers running the same control panel and Apache 2.2.16 compiled and installed the same way as the 2.2.17 and there are no problems.
