I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 RepliesI can dual-boot on my PC by using my SATA drive for Windows & a second IDE (PATA) one for Ubuntu.However when I try to install both OS's on the Primary SATA drive side by side only one is detected (and I have no option to boot the other).
I have a friend with the same problem who is trying to boot Win7 and Ubuntu off the same SATA drive and the same issue occurs on his (He doesn't have the second drive as an option as I do).
Does anyone know a way to get side by side installation to work on one (SATA) drive? Failing this is it possible to boot Ubuntu off and External hard drive and still be able to dual boot Windows & Ubuntu?
I have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?
View 6 Replies View RelatedI have a new system using an Intel DG451D main board. I have been trying to get a RAID 1 mirror set working as the main drive in this system and for some reason, my SATA drives - three of them all new have had their SMART data changed to show the drives as failing and in need of replacement. Eventually the drive reports failure to the degree that the BIOS no longer recognises it. When loading the Centos os I was getting differing results because of this issue. I am not sure if this is a hardware issue even - I know that the drives were all very much OK and brand new - no good now! Just putting a feeler out to see if anyone has had a similar issue or to see if anyone knows of any possible known causes for this?
Failing any explanation, can anyone suggest a good desktop style Main Board that supports RAID well for Centos 5.4? I plan to sue this as a small server system so graphics etc are not important here.
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View Relatedi can only boot to MSDOs with floppy msdos bootup on A:. I want to install ubuntu 10.10 and completely erase HDD but the ubuntu disc won't bootup even when bios is set for cd only. This is older HP pavillion that I have retired but HDD scans out good so I thought i would run Ubuntu only and maybe put MS out of business but not having any luck with install. When booting from HDD error is system 32hal dll is missing or corrupt but HDD C: is 0 anyway. I just want to install so I can play with Ubuntu.
View 14 Replies View RelatedToday, I finished assembling my dream computer. I can boot it into the BIOS, and I checked that everything was working correctly through there. Anyway, I attempted to transfer the hard drive from this computer to that one. This computer is a Dell (blech) Optiplex GX280 with an Intel processor and integrated graphics. The new one has an AMD Phenom II processor with an ATI card and an ASRock motherboard (drastically different machines, I know...) When I try to boot, GRUB gives me an error message that says something like:
Code:
blah whatever cannot find /dev/disk/by-uuid/372de761-9577-48be-ba19-c6b2890cb229
Did I do something wrong installing the hard drive? Or is this a problem that is going to happen no matter how hard I try to make it not happen? If the second is true, will it help if I wipe the disk and reinstall Ubuntu on the new computer?
P.S. I know similar threads about transferring hard disks have been posted, but no thread has mentioned this error.
I'm trying to get my work's infrastructure built at home before I go up there and show the boss. It is as follows: VMware esxi installed on the server with:
Windows server 2008
Ubuntu 10.04 server
I've got VMware installed. And I have spent the past 7 hours trying to figure out how to manage it. I found out that vsphere has not nor will ever be supported for Linux; which was my first problem.
Second Problem So I had to dig around for a spare Windows 7 dvd. To my UN-surprise it blue screened before it even got to the Windows installer.
Third Problem So I dug around for my Windows XP disc. Wouldn't find my sata hard drive and I wasn't about to dig around for a floppy drive and disk, in order to install it.
Fourth Problem I remembered that I had a dual boot of Windows 7 downstairs and proceeded to download and install vsphere. It wouldn't install because of some updates that needed to be installed. I installed them and got vsphere installed as well. However upon connecting to my vmware esxi, there was yet another error that had to do with some update. I found out that the error had been existent since 2009 and for some reason NO ONE at VMware has fixed it....
I recently finished installing Fedora 9 on a Prolient ML 330 G6 Server, but i configured the SATA hard drives to be viewed as four seperate hard drives. I was asked to merge the drives to be seen as one 800GB hard drive, my biggest fear is that we had set up Samba to share folders between fedora 9 giving specific users access to specific files saved on the Prolient server, will those settings be lost.And could you call that a File Server or do you have to enter any more settings And also if anyone could point me to a tutorial on Logical Volume Management and Raid specifically for fedora 9
View 10 Replies View RelatedI tried to load Red Hat Linux 4 on my PC, which has 945 MB, Core 2 Duo Processor, 2GB RAM, 250GB SATA HDD. But i couldnt do so as it did not detect the hard drive and was asking for drivers. I changed the SATA settings to Legacy but still it didnt recognise the HDD...I have Windows XP SP3 also installed on it.
View 2 Replies View RelatedI have two drives one is a 500 gig SATA drive running Vista SP 2 now the other Maxtor 160 Gig drive is empty. I would like to install Ubuntu on that drive. Now I just though of installing from the setup however would this screw up my Vista partition ?
View 1 Replies View RelatedIs there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies View RelatedI have a computer that was given to me and is no longer booting up properly. It's an Acer with VISTA installed. I would like to format the hard drive and start over with Linux. I don't have the original windows vista disk, I don't believe the computer even came with one, and no back up disks. Apparently this is the only way to format VISTA. When I am in the command prompt here is what happens.
C:> format c:
The type of the file system is NTFS.
Enter correct volume lable for drive C:
I don't know the correct label.
Searching on the forums I found this.
format c:/fs:NTFS/p:/
That doesn't work. I get this:
"Invalid parameter - /p:"
I have purchased a DLink Sharecenter Pulse NAS as my PC failed. I wanted to put the two SATA drives in and extract the data before formatting to use as JBOD or RAID. However, before I managed to access my data, the setup software started formatting the drives. I switched it off immediately.
Purchased a SATA to USB2 lead and connected to my work laptop but I cannot see the drive(s). Used Partition Magic and each drive has 3 partitions - of which show about 74GB as used and 2 x 512MB as not. Looks like the drives have been partly set for Linux but the format was not comlete. Have tried to use explore2fs to read them but I cannot access the 74 GB partition only one of the 512MB partitions.
I'm a bit stuck now - any one got any ideas how I can get my files off the 74GB partition before I put them back in the NAS to format.
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies View RelatedI have a number of drives that I am setting up for friends who wish to switch/alternate from Windoze. So far several completed. One particular drive is being a bit difficult. When checked on my system[10.10] by Sata/USB wire it reads OK and gives the following info. 200GB, 768kb used, file sys Ms-Dos
When installed on the Mobo as main drive and machine booted set to boot from HD it sometimes reports 'No Drive Found' Reset the BIOS to boot from CD and Load Ubuntu from DVD- it goes through load routine then reports 'Error- cannot Mount drive[or words to that effect] Tried installing frm CD/DVD drive to the disk via the SATA/USB wire But that failed also with CD Auto load error So the disk seems to need setting up in some way to suit Linux presumably just like FDisk in Dos/Windoze
I'm running Ubuntu 10.04 inside VMware Player running under Windows Vista and I can't connect to the internet or the host computer from the Ubuntu.
I have set all the VMware services to manual (like VMware DHCP Service), but starting them manually doesn't help.
In VMware, the network seems to work (there is a green dot beside the network icon) and I have tried both Bridged and NAT settings.
ifconfig doesn't show the eth1 interface, unless I give it as a parameter (or use -a). I think this means that Ubuntu thinks that the network isn't connected at all.
Dear OpenSUSE experts: I am a dual boot computer: Win 7 64 bit and OpenSUSE 11.2 64 bit. This computer has 3 hard drives: SSD, 500GB sata II, 1 TB sata 3. SSD contains openSUSE 11.2 500GB sata II contains Win 7.
Win 7 sees the 500GB sata II drive and the 1 TB sata 3 drive. openSUSE sees the SSD drive and the 500GB windows drive. The Motherboard BIOS sees all 3 hard drives. Is it openSUSE not support sata 3 drive? Or do I have to install special driver for it to see it in OpenSUSE?
I have 4 hard drives in my computer. 1 for may root and home partitions. 2 extras for storage and 1 for Windows. I have the hard drive with my root and home partitions set as the first hard drive in the bios. However, in the Ubuntu setup it isn't the first one in the list. I would have thought that the first drive would be get set to sda. That is not the case.
View 1 Replies View RelatedI have REHL 6 Desktop. I have a macbook pro 7,1 with nvidia graphics and (I believe)a nvidia sata controller. I have fedora currently installed with no problems during or after installation ( with a few drivers of of course).
When I boot with the disk i burned ( works on other computers) it comes up of a list of devices to select and when i select local CDROM or DVD it goes to select drivers. So, then I tried "burning" the installation files to an external hard drive then I used the DVD to boot and selected Hard Disk then selected SDB1 (path of external HD). With this method I get to the Graphic installation screen and can go to the part were it says custom partitioning. I select ok then it say the only disk that is available is SDB1 (EXTERNAL).
I had put a second Sata hard drive in my computer and was pleasantly surprised not to run into any problems. No BIOS changes, just start the partitioner, partition, mount, it worked.And then... my computer didn't boot today.I disconnected the new hard drive and it went a little bit further, allowing me to log in as root and remove some lines in /etc/fstab. After that, it booted without any issues.I then remembered that the new drive was /dev/sda and the old drive /dev/sdb. I assume this is the reason for not booting, there is no GRUB on /dev/sda. How do I fix this? Can I simply plug in the cable for the new drive where the cable for the old drive was?
View 4 Replies View Relatedi have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies View RelatedI have a Desktop system using the Intel DG45ID motherboard with integrated graphics. I can't install from the 9.10 LiveCD. It can't find the Hard drive which is on the chipset's SATA controller.However, I can install 9.04 just fine. I can even do the 9.10 upgrade without a problem.Does anyone know if this bug has been reported. I'm hoping 10.4 has this fixed. I'll test the beta to see
View 9 Replies View RelatedI have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:
I am using a 500gb sata internal hard drive.
WIN 7 - 125gb
STORAGE - 15gb
WIN XP -125gb
MAC OSX - 180gb
FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition.
After following instructions:
http://hydtechblog.com/2009/01/26/du...windows-vista/
[Code]...
I have a laptop running linux and a computer running windows 7, I would like to be able to send print jobs from my laptop using linux and not have to be physically plugged in. I tried adding the printer through samba and it doesn't work.
the specs are as follows:
[URL]
the message i got was idle unable to connect to cifs host will retry later. linux gave me two drivers and i have tried both previously, the print job seems to get lost in space.
How to Transfer 4 versions of Vista and Windows-7 installation DVDs into a flash drive The recent versions of MS Windows of Vista and Windows 7 installers support booting from a USB device so it is possible to transfer the contents of the installation DVD to a flash drive and use it for booting. A USB flash drive however is classified by M$ as a �Super floppy� that can only have one partition. This means one flash drive can store one MS Windows boot loader.
This tutorial shows how to use Grub, a Linux boot loader, to boot 4 Vista/Windows 7 installation in one flash drive. Technical consideration
(1) I have checked to my satisfaction that none of the MS Windows of Win2k, Xp, Vista and Win7 can mount or see more than one partition in a flash drive. That doesn't mean the user can't have multiple partitions. It is just MS systems have been engineered to mount the first one it recognises and disregards the rest.
(2) MS Windows installers of Vista and Win7 do not like to be booted from a logical partition. As a flash drive with a Msdos partition table can have a maximum 4 primary partitions hence this tutorial describes 4 versions of MS Windows installers of Vista Home-32, Win7 Ultimate-32, Vista Home-64 and Win7 professional-64
[Code]...
I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies View RelatedI have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode. Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.
Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia) Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM Ram: 4 GB (I think, its been awhile since I built this thing) DVD Burner: LG I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.
How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?
I have been working on this for awhile now. On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.
While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is. On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.
[Code]...
I have a Western Digital 1Tb WD10EAVS Caviar Gp Hard Drive. It does not have an operating system installed but it have alot of my important files. The hard drive began making a clicking sound and when I boot up my computer I see my other drives and the sata slot for that drive remains blank. Can any one help me recover or fix my hard drive
View 1 Replies View RelatedI need to install windows xp and linux in separate hard disk on my computer.Is it possible?
View 2 Replies View Related