I use Lucid x86_64. Lately I have been getting the following message referencing the mounting of my flash drive on start-up: "The disk drive for /media/UDISK is not ready yet or not present. Continue to wait; or Press S to skip mounting or M for manual recovery." I hit skip and and Lucid continues to boot fine, and the flash drive is mounted and working properly after booting. How can I get rid of this message?
View 2 RepliesI upgraded a linux box from Koala to Lucid, and everything seems ok except at boot I occasionally get an error mounting some partitions. Here is the boot.log:
Code:
fsck from util-linux-ng 2.17.2
/dev/sdb1: clean, 316325/17965056 files, 5723474/71844680 blocks
udevd[402]: can not read '/etc/udev/rules.d/z80_user.rules'
mount: /dev/sdb1 already mounted or /backup busy
mount: according to mtab, /dev/sdb1 is mounted on /
[Code]...
For some reason whenever I load gnome-terminal using 9.10 I get this message:
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
Notice the red-colored band that appeared on the top of this webpage while I was surfing the web.What does this mean? I cut and pasted the band bigger so you can see it better and what it says. I checked for the file on /home but I found nothing. I feel this is threatening my Ubuntu.
View 5 Replies View RelatedI recently reinstalled CentOS, and after a ton of updates, I'm just about finished getting things set up again. However, today I've noticed this really interesting message whenever I run yum. Just for demonstration, I'm going to remove gnome-screensaver, since I prefer the Xscreensaver anyway. This is the complete output, with the strange message highlighted;$ sudo yum remove gnome-screensaverLoaded plugins: fastestmirrorSetting up Remove ProcessResolving DependenciesThere are unfinished transactions remaining. You might consider running yum-complete-transaction first to finish them.
--> Running transaction check
---> Package gnome-screensaver.i386 0:2.16.1-8.el5 set to be erased
--> Finished Dependency Resolution
[code]....
This puzzling message pops up during startup and forces a reboot:
Code:
Checking root filesystems. fsck.ext3: No such file or directory while trying to open /dev/hda1 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem, then the superblock is corrupt. This was typed in not copied.
The laptop is running gentoo linux. Here is the fstab file and instead of having "boot" on its own partition I decided to have both "/" and "boot" in the same partition. This has never caused any problems before so I don't understand what the problem is now.
[Code]...
When I run dmesg I get
Code:
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
Does anyone have any idea what that means?
Fedora 12 Gnome 2.28
I use Debian Lenny on desktop. On bootup I get this strange message
Code:
Question one: what is hub 2-0:1.0? A utility? A library? A module?
Queston two: what does "enumerate" mean in this context?
Question three: I can't figure out what "port" is meant: a networking port something on the motherboard one of several I/O port/connector/sockets on the back of the computer? (Hope you know what I mean--- you stick USB connectors into them to connect your computer to a USB device, such as a USB mouse.) the one and only networking port/connector/socket on the back of the computer.
Possibly relevant: I sometimes but not always have a USB cable connecting my printer to one of the USB ports/connectors on the back of the computer at boot time. But the message always refers to "port 1", never 2,3,4. due to lack of options for getting on the Net, I use an Actiontek router which demands to be given 192.168.0.1 which would otherwise be taken by my computer, which instead gets 192.168.0.2. (Grasping at straws...)
I recently installed Antix Mepis 8M on Dell Latitude D410 laptop. Everything is fine except that at boot I get the following weird message: pci 0000:00:1e.0: BAR 7: can't allocate I/O resource [0x10000-0xffff]
It doesn't noticeably slow down the boot and everything works fine once running, but I'm curious to know what it might be and whether it could possibly represent trouble in the future.I googled it and found this: http:[url].....But there is no associated solution, and other results are largely reposts of this query.
The hd starts running on it's own and I check the log files and find this:
Code:
Mar 16 21:28:47 ubuntu kernel: [16953.273544] VFS: busy inodes on changed media or resized disk sr1
Mar 16 21:28:47 ubuntu kernel: [16953.293541] Buffer I/O error on device sr1, logical block 26827
Mar 16 21:28:47 ubuntu kernel: [16953.293550] Buffer I/O error on device sr1, logical block 26828
Mar 16 21:28:47 ubuntu kernel: [16953.293619] Buffer I/O error on device sr1, logical block 26827
Mar 16 21:28:47 ubuntu kernel: [16953.293623] Buffer I/O error on device sr1, logical block 26828
Mar 16 21:28:47 ubuntu kernel: [16953.293645] SQUASHFS error: sb_bread failed reading block 0xcb75
Mar 16 21:28:47 ubuntu kernel: [16953.293649] SQUASHFS error: Unable to read fragment cache block [32d1bc4] .....
Mar 16 21:30:47 ubuntu kernel: [17073.066145] Core dump to |/usr/share/apport/apport pipe failed
Accidentally the usb plug on my WD "My Book" got halfway unplugged and I didn't notice it. when I rebooted it, it wouldn't read the drive. I tried using G Parted to repair it but no success, it just runs forever accessing the drive and never finishes. (I left it running an entire weekend and it didn't finish) the drive is formated ext3.
When I try to mount the drive in Ubuntu 9.10 it gives this error message:
Strangely if I boot into Windows and use the ext driver I can access the drive just fine. is this something I can fix? if needed I can use Windows to do any repairs.
A recently installed 10:10 displays this message at start up:
FATAL: Cannot load generic modules /lib/modules/2.6.35-25-generic/modules.deb
(As best I can remember.It disappears so fast).
As I am having trouble getting a fingerprint reader to work, I thought I ought get it fixed.e.
maybe not so simple as what the subject saysBackgroun storyI have a couple of encrypted hard drives created with cryptsetup
I have the following lines in my /etc/crypttab
data1 UUID=someUUID none noauto
data2 UUID=someotherUUID none noauto
[code]...
i have installed XEN and i want to install a VM winsows server 2008 but when i am creating from yast i get the message when i want to start the VM :
device 0 (vif) could not be connected Could not find bridge and none was specified
I was connected to my intranet website using webmin. I was getting a message that the hostname cannot be resolved. I went into the /etc/hosts file and change the following:
127.0.0.1 localhost intranet.lab.net 192.168.50.100 intranet.lab.net
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
[Code]...
When I try to start the program Gparted in Ubuntu, the window opens up, and it looks like it is initializing, but then it just disappears, without an error message or anything to go by.
View 4 Replies View RelatedI am using 10.4 on a Toshiba satellite pro L100 and have got it working well enough with ubuntu. However, every now and again it freezes on start up and I think it may be before the automatic disc driver check and scan that happens on start up now and again. It gets stuck and tells me
[ 33.117318][drm:rs400_gart_adjust_size]*ERROR*forcing to 32M GART SIZE (because of ASIC bug?)
I only ask as I have to do a hard shut down and computers don't like them do they?
Ques-1 what is the default bashrc and how i can set path java and tomcat?
Ques -2 When I start the terminal it showing the following line ? How i cat solve this?
Command 'lesspipe' is available in the following places
* /bin/lesspipe
* /usr/bin/lesspipe
The command could not be located because '/usr/bin:/bin' is not included in the PATH environment variable.
lesspipe: command not found
Command 'dircolors' is available in '/usr/bin/dircolors'
The command could not be located because '/usr/bin' is not included in the PATH environment variable.
[code]....
I'm not sure how to do this. I checked the hard drive preferences and looked through the forums... I don't want to manually mount my hard drives(s) every time I boot up just to access my music and wallpapers.
View 5 Replies View RelatedI've recently installed Fedora 10 on a space computer. It works fine until I tried to install Mplayer.
As i've read on a number of sites that there is a dependency problem, I went through loads of websites looking for a fix. I found nothing that would work.
Now i'm stuck with a problem that i think might be worse. If I start a .RPM I get the following message.
Now when i try to install other things it's hit and miss, I tried to install VLC and got the same message.
I've got no idea what i've done to get to this point and i don't really want to reinstall fedora 10 again.
I am trying to get vsftpd started on my server. I followed the steps outlined here: [url] but for some reason, the daemon is not starting or throwing an error message.
After making all of the changes to vsftpd.conf, if I execute the following commands, here is the result:
OpenSuSe fail to start if loading on fail safe following msg appears
blogd: no message logging because/var file system is not accessible
I have run defrag through XP
Just installed F15, was everything fine, but then gnome got away, from terminal I have<gnome-session:1951): Warning can't start display message.Before that I put in config file one extra line to start tint2 like <sleep 3 && tint2.Not sure was it the reason?
View 4 Replies View RelatedAfter install debian 8, I can't see system start and stop message from console ... How can I enable system message from console in debain 8?
debian 7 output
----------------------------------------------
root@demo:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .
root@demo:~#
debian 8 output
-----------------------------------------------
root@demo:~# service apache2 restart
root@demo:~# <=============================== No message (start or stop)
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
i am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Replies View RelatedMy ubuntu does not start up and give me a message contains the following options:
Run ubuntu in low graphical mode
Reconfigure graphics
Troubleshooting
Exite to login screen
And by default the first option is selected
I tried each but without result
How I could retrieve my ubuntu to work?
I've setup DHCP and a DRBL server on my box running Lucid, and everything is working fine except TFTP.TFTP is configured, but when I try to start it with:Quote:service tftpd-hpa startThe following is returned:Quote:
start: Rejected send message, 1 matched rules; type="method_call", sender=":1.96" (uid=1000 pid=24555" comm="start") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart (uid=0 pid=1 comm="/sbin/init"))
[code]...
I am getting the below message, when I try a start update manager?
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug for the 'update-manager' package and try to include the following error message
E:Malformed Status line, no 3rd word, E:Error occurred while processing toshset (UsePackage2), Eroblem with MergeList /var/lib/dpkg/status, E:The package lists or status file could not be parsed or opened.'
Update-notifier told me there were updates today and I installed them. Among them were some for chromium (the browser, not the game ). After the update I couldn't start the browser. I tried starting from terminal and got: "Inconsistency detected by ld.so: dl-minimal.c: 138: realloc: Assertion `ptr == alloc_last_block' failed!" "I haz a fail!", I thought to myself and then tried rebooting and then reinstalling. Neither worked. This is on a 64-bit machine. Everything else works as expected. Using Firefox now, but I want my chromium-browser as well.
View 9 Replies View Related