I would like to set up a PPPoE server based on CentOS 5.5 i386, in order to give public IP addresses to my customers. Does have anyone a tutorial or can you give me some clues ?
View 1 RepliesI've just done a fresh install of Ubuntu 10.04 lucid lynx and how to setup a pppoe connection in ubuntu. ( thats after 2 hours of googling and trial and error)
system info: its a laptop : Dell Studio XPS 16 connected to a Ethernet hub thats connected to a dsl modem..
My adsl modem is in bridge mode. I can connect to internet via pppoe . pppoeconf recognise the pppoe in eth0 and setup a connection and I can use it. How can I setup a pppoe connection using pppoeconf so that it uses wireless ? I set the wireless mode to bridge in modem settings. But, after that the access point stopped appearing in "aps in range" in network manager and I can't connect to it. pppoeconf also doesn't recognise wlan0 as a valid pppoe link . but dat is normal since i don't think it can check if wlan0 is pppoe without wlan0 being connected to the modem's wireless network. How can I connect to Internet with modem in bridge mode and connections via wireless interface of modem? Is pppoe over wireless even possible ? coz the datalink layer of wlan is not ethernet rite?
View 6 Replies View RelatedHow can i add a PPPOE connection witch connect automatically on system start up in text mode in centos 5.4
View 3 Replies View RelatedPl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View RelatedI have a he.net ipv6 tunnel account and a manage to pass all the test to sage mode, but with debian 6.
I would like to have a step-by-step setup of centos 5.5 with iRedMail 0.7, but for only ipv6.
IP6TABLES
iRedMail with LDAP
DHCP for ipv6 (optional, just wanted to see the config)
Can't seem to add jpg files.
I'm trying to setup PPPoE connection to establish my DSL connection, but I got
Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.
When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?
I am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
I have this strange problem. I can't setup my PPPoE connection through the kPPPoE. My ISP told me that this PPPoE has something like name server or something like that and i must use some other package to connect.
View 3 Replies View Relatedhow to setup PPPoE on ubuntu or even fedora which requires only username and pass to login.
as for pppoeconf.. it gives me error some modconf not found.
I currently have 10.04 installed and would like to update it after getting the internet working .
I won't be able to connect to internet in ubuntu so don't tell me methods which will require me to access internet IN ubuntu. If some downloading from windows is required it's good.
My server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this? This forum has no such message....
View 3 Replies View RelatedMy server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this?
View 2 Replies View RelatedIs there any way to setup the Centos Directory Server without an internet connection?? i tried using the command: yum install centos-ds
but this just tries to connect to the internet to to download the packages. Is there a site where i can find the package so that i can copy it to my server and install it or is there some other way to do this?
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedWhat is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies View RelatedI am trying to get an X window server setup on my CentOS 5.3 server rack. I have gotten as far as to doing:
yum groupinstall "X Window Sever" "GNOME Desktop Environment"
EDIT-Forgot to mention that I did Xorg -configure before testing the config. Only errors I got were:
(EE) LoadModule: Module ati_r500 does not have a ati_r500ModuleData data object.
(EE) Failed to load module "ati_r500" (invalid module, 0)
[Code]...
Linuxquestions--I posted this over on the CentOS forums, which are not as booming. Then I remembered these forums for when I had my VPS way back when and you guys were pretty helpful, of course expected me to mostly do my own reading which I dont mind its just having a hard time understanding some of the things in what I was reading. I even believe I came here with this problem before but abandoned the issue because my VPS was not powerful enough or something of the sort, but this was many years ago also on CentOS using apt. Now using yum which I like much better.
I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
I have just installed CentOS 5. I have set mysql database to access from remote machines. But now the problem is it is not connecting from the local machine now.
View 5 Replies View RelatedWe have two CentOS 5 servers in production (web and database). We are setting up a single staging server that will mirror the configurations of these servers as closely as possible. What is the easiest way to ensure the exact same software and configs as the production servers are setup on the new staging server. Our contracted data center provider has already informed us that they do not perform images and NO we do not have physical access to the machines. It is undetermined whether we will be virtualizing the staging server into two virtual servers yet, so for the purposes of this post lets assume we are not. I'm seeking a faster/more precise method than doing this by eye and hand.
Some information on our web server code...
I just recently purchased a vs from a company and i am trying to set up a web site on it with kloxo and set up the mail for it upon setting up the mail settings it says:
"It is very essential that you set the my name to a properly resolvable hostname, since otherwise, many public mailservers like hotmail will reject mails from your server"
Now this is my first time setting up a vs before i have set up linux vm's to get email access but that was about a year ago.
i try to install mysql-server how do i create a password for it
yum install mysql mysql-server
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.optus.net
* updates: mirror.optus.net
[Code]...
I'm using CENTOS 5.5 and I want to connect to internet using 2 pppoe accounts same ISP and i have a sigle NIC eth0.I used adsl-setup to create pppoe connections, 1 is ppp0 and second is ppp1. When i use /sbin/ifup ppp0 it works, i can use the internet, but when i try to use /sbin/ifup ppp1 while ppp0 is connected, nothing happens, i did ifconfig and there is only ppp0 showing.I'm a BIG NEWBIE of linux, i need to know step by step how to make this work, i heard something about a virtual network... but nothing clear.
View 7 Replies View RelatedI am currently involved in setting up an openldap server on a CentOS platform. I am having some issues with getting it set up to the point that I can remotely manage the server via phpldapadmin in a web browser. I am running into an issue when starting the slapd daemon.
See the output below to better understand:
I have installed the nagios by FAN 2.0 CD. In this distro all the required softwares are bundled. Now i do not know where to start. How can i monitor my other server on the network. I have google on the internet but it is not giving the clear idea. Is there any document on the net or how to which can show that how to configure nagios with centreon or originally from changing nagios files.
View 6 Replies View Relatedi try slicehost out with CentOS5, What is the right direction to setup FTP access to my server?
View 1 Replies View Relatedon my server I have atMail and a intranet site being hosted using mySQL for the database locally, and obviously backing it up would be a good thing. I got the backup package from the list if you use the add/remove software called dump-0.4.etc.. can't seem to find much on how to use it, set it up, nothing. Granted I could be looking for the wrong thing which I'm sure is the case. As of now it's looking like a USB drive is going to be my only option, that will change in the future as this "project" goes further (we are a windows shop trying out Linux, and the next step is going to be adding another server that's a file server at that point we'll probably go to NAS for the backup and then transer that to a USB for offsite/secondary backup).
View 2 Replies View RelatedHave setup a CentOS 5.5 with IPSConfig that has been running for maybe 6 months, it was only intended to be a web server for multiple domains. Issue now is that a web developer has created a form that he is trying to email from the site, I did not have anything configured for mail and he does not care to write a script that would not require the mail service to be on the web server.
Have configured/reconfigured main.cf multiple times but no success.
Postfix appears to send the outbound email to the queue but never goes out. Have setup mail service for the domain "land***.com" in ISPConfig and tested with a single user created for the domain from the server.
What did I miss in the configuration to get "connection refused"?
Nov 2 11:27:19 WC01 postfix/cleanup[6711]: E4DFA1190011: message-id=<20101102162712.E4DFA1190011@WC01.nors***.com>
Nov 2 11:27:19 WC01 postfix/qmgr[6665]: E4DFA1190011: from=<admin@land***.com>, size=377, nrcpt=1 (queue active)
[Code].....
should I remove the domain from mail services and would postfix work on its own on a server with ISPConfig?
I am trying to build a Vehicle Tracking System in Centos 5.3 with project OpenGTS [URL]. Here a very simple guide to setup guide. But according to the guide things are not working. The components of OpenGTS:
(1) Apache Ant
(2) Apache Tomcat
(3) Java
(4) Mysql
(5) Java Mail
(6) OpenGTS
In this whole project java installation is creating problem.
I am trying to setup an OpenVPN server using CentOS 5. I ahve installed everything, configs are good, server starts fine. I have generated my certificates using the easy-rsa 2.0 included with OpenVPN. I have downloaded all the certificates to my machine and setup my client to connect. I am having that typical problem everyone seems to have where my client says certificate verify failed. However I can use openssl on the server to verify and it is ok. What am I doing wrong here?
Code:
[root@GSFOVPNxxx01 openvpn]# openssl verify -CAfile ca.crt gg-jbloomer.crt
gg-jbloomer.crt: OK
[root@GSFOVPNxxx01 openvpn]#
client output
Code:
2010-12-07 08:44:33 MANAGEMENT: CMD 'hold release'
[Code]...
I just dont get it, I have racked my brain and google until my eyes bleed and can not figure this one out.I am sure it is something simple that I am missing.