i have Elastix (( Centos )) machine runing and have many configrations i need to take iso iamge from it and use it directly for any othe machine ? How to this step bby step ??
View 1 RepliesI'm trying to install the GD library from the Add/remove software app, but it will not install because it says that it can't resolve a dependency "PHP-common", however, this IS installed, yet it keeps giving me this error. Is there a work around to this or a way to fix the dependencies problem?
View 2 Replies View RelatedI am unable to install CentOS V5.4 on my work station.
After collecting the config info (root password, etc.) the installation immediately gets disk write errors while doing PVCREATE.
I'm installing from the DVD to the 136GB SCSI drive. The drive is known to be good and is writable as a Windows
volume.
The scsi drive is the only drive selected for installation.
I've selected to delete all partitions on the volume and install default configuration however the new partition is not created. code...
I download the xxxx.tar.bz2 file
extracted it,
when i run ./configure under the directory i get the following error code...
i even followed the link http://wiki.winehq.org/WineOn64bit
also http://forum.winehq.org/viewtopic.php?p=28622&sid=17383eb0b922b2c230238f9ab50b265a. and several googling.
i think the architect of the OS and the wine is not matching.
So guide me to solve the above problem.
the output i get on "uname -i"
x86_64
Ive installed X Window System and GNOME Desktop Environment on my server. I am running CentOS 5.3 btw. Ive installed and tried running it but i get error no display specified. GRRRR. I cant seem to find the file where i can specify a display. Im trying to setup a gui so i access my server via vnc cause im kinda a linux noob.
View 1 Replies View RelatedI want to migrate my Debian server to CenOS. The Debian server has the following partition layout code...
When I try to map Logical Volume 'home' to '/home' en choose the 'Leave unchanged (preserve data)' option I get the following error:
The current requested size ( 947904.00 MB) is larger than maximum logical volume size ( 262144.00 MB).
To increase this limit you can create more Physical Volumes from unpartitioned disk space and add them to this Volume Group.
There is something wrong with the Xwindows start of my centos5.4 ( 2.6.18-164.el5 X86_64). After several times to try to start the Xwindows, there is a warning message as following:
gdm[5917]: The display server has been shut down about 6 times in the last 90 seconds. It is likely that something bad is going on. Waiting for 2 minutes before trying again on display :0.
I recently updated CentOS and PHP from 5.2 to 5.3. I ran into this issue though code...
I attempted to re-install memcached and got memcache.so moved to the appropriate module folder and updated php.ini. I am not sure if the updates removed other dependencies or if this is related to my CentOS update.
I have been using Eclipse(Helios) in centos5. my eclipse is getting core dumped frequently.is there any solution to solve this coredump.
###################################################
# vi /etc/security/limits.conf
Make sure the following config directive exists:[code]..........
Other distro's have the ability to remaster (or make), a live cd of their install, is there an easy way to do this with Opensuse?
My thoughts are primarily with a fresh install complete with all updates, then make a live cd. In the event of a disaster a simple install from the live cd would get an updated version back again without the headache of installing updates, codecs etc...
Ubuntu has remastersys, PcLinuxOs can make Live cd's by a default app but i've not seen such things for Opensuse versions >= 11.1.
The install went fine but the only issues is getting the server on the network.
I can't ping any thing other that the ip address assigned to the server.
I did it through the gui , the command line and using ifconfig and editing the ifconfi-eth0 file and nothing works.
any ideas on how to get this to work.
i see nothing wrong in the messages.log file either.
We have upgraded CentOS release 5.6 (Final) with 2.6.18-238.9.1.el5 kernel. After the reboot all configuration files under /etc became READONLY. my file system's still in rw mode.code...
View 2 Replies View RelatedI'd like to remaster my jessie system (with my own preferences) but i cannot find any tools on jessie like ubuntu has.
View 4 Replies View RelatedI installed Fedora with some useful programs for my job. I would like to make a live cd (or dvd) of my system (with programs and repositories list), so I can install it to 5 other computers I have.I found revisor but I think it's not what I'm searching.In Ubuntu I was using Remastersys and that's what I want to do of my system.Since I'm new, if it has a graphical interface, it would be nice. If not, then just explain the terminal commands.
View 4 Replies View Relatedi am a fresher to linux. presently i am using CentOS for getting some experience in that. but i have a problem with internet connection using in CentOS. i am using prolink USB ADSL2+ modem (H5200U). so, i request from all readers to give alternative answer.
View 2 Replies View RelatedWhen I am in run level 5, I attempt to delete some 'trash' that has accumulated in the 'Trash' icon on my Desktop/.
When I right click the icon and select the 'empty trash' option, I get a permissions error so I just press the 'cancel' option however the contents of the 'Trash' have been purged anyways. It is working basically but I don't understand why I am getting a permissions error.
[cwilliams@tunafish ~]$ id cwilliams
uid=500(cwilliams) gid=500(it) groups=500(it),100(users)
I am newbie to centos. I am trying to install virtual server in my machine. I have installed the Xen virtual machine monitor which comes with CentOS through add/remove software. Here is the problem, I am unable to open connection with Xen hypervisor. Here is the error i am facing:
Unable to open a connection to the Xen hypervisor/daemon. code...
Let me start off with the usual: I'm a linux newbie but am doing pretty good so far with google by my side. I've come across a problem I cant seem to find an answer to:
I just got a CyberPower 685 AVR UPS. I Installed their power panel software and it works great in CentOS 5.4. When I reboot, the system hangs right after the "Red Hat Nash 5.6..... Starting" message. I've left it for 20 mins so far and it's still hanging. If I unplug the USB data/shutdown cable, within about 10 seconds it starts detecting hard drives and continues booting...
Ive even returned the UPS for another to see if it was bad, and it still is giving me problems.
I'm experiencing some rather severe problems after updating my Centos 5.4 system (Virtual Xen guest). What happens is that when the system boots it complains about missing .so files which prevents about 50% of the services installed from running.
I'm suspecting that it has something to do with selinux for two reasons: 1. The first services to go down complains about the security context of some files, and 2. selinux was kinda the reason I decided to update in the first place as it was disabled when it shouldn't be (enabled in system-config-securitylevel, disabled when running sestatus).
The whole boot-sequence ends with alot of "INIT: Id 'X' respawning too fast: disabled for 5 minutes"-messages (including all runlevels) before it goes stale, and I can do nothing.
The server in question had undergone very little tinkering from my part, pretty much none at all, the only services installed after installation was apache, mysql and webmin.
Details:
CentOS 5.4 is installed on both the host and guest.
The guest runs on an lvm-partition.
I have two other vm's(also CentOS) running just fine, altough I'm a bit weary of updating them .
Attached are some screenshots of the boot-process.
I hope some one here can share some insight on this problem. It's making me pretty nervous seeing that our whole network is run by CentOS-installations (not that I'm certain that CentOS is the culprit).
I am running matlab 2010b on centOS5.6.
Matlab opened without any error either in the computer terminal or in VNCSERVER.
While running bench (of matlab) the session or the vncserver are crashing.
In some cases the bench run for the first time without any problems, however it will crash the session or the vncserver on the 2-3 runs of the same code.
Any idea how to solve this issue?
Maybe there _is_ no easy way, but I have a home-made video in Standard Definition on a DVD that I'd like to do some simple editing of and reburn. Just trying to take out some dead air-time.
I looked through this forum lightly, but maybe don't know what I'm looking for.
Is there any not-too-sophisticated tool or set of tools that will let me do this on Ubuntu?
I have ubuntu installed in my desktop . I wanna make an iso of my installation to install that ubuntu in other Machines . Is there any software to create it ?
View 1 Replies View RelatedAfter upgrading Centos 5.4 cluster nodes to 5.5 all virtual services failed to start. All virtual services are marked as 'failed'. The reason: new /usr/share/cluster/vm.sh requires 'which', but this is not reflected in rgmanager-2.0.52-6.el5.centos.
Solution: run 'yum -y install which' on all nodes, and reboot cluster. Hope that will save somebody hours of downtime.
I'm looking for a way to create a live cd from the existing image. I'd like to include some sort of installer, I've found gui remaster utilities, but none for the shell only. I need to setup the image to automatically login, so the user could just pop in the cd and start it up without a monitor or keyboard.
View 10 Replies View RelatedI am trying to install Ubuntu 9.10 Server edition and I am getting stuck at the language screen... Yep the language screen that comes up as soon as you boot off the CD I have not gotten very far and I am already hitting problems... I am using a USB keyboard but it is working in the bios I don't know if this could be the problem?
View 1 Replies View RelatedI have just installed 9.10 on an old Dell C610 laptop as I had to install a new hard drive and didn't have the old XP licence number or COA!
Anyway, the Ubuntu install all seemed to go ok but I'm having a major problem with the display not following what I'm doing and not updating as windows are opened and closed. Am I likely to be doing something silly or have I got a hardware conflict somewhere. Where should I start?
I have repeatedly installed from CD & each time after reboot, I get an error..
afbe47d-19bo-416f-adaa-d1b1255ecfaa
I do not have knowledge of ubuntu Nvidia drivers etc. because my previous installations (ie. 9.04) worked OK. I do not have a dual boot HDD, just a clean install.
By the way, I can upgrade from 9.04 to 9.10 using the add/remove thing & everything works.
Recently i installed kubuntu. i tried to install opera,chrome but i got error messages like dependency not satisfiable :libgconf 2-4
i'm new to ubuntu
I'm trying to install Ubuntu 10.10 on my custom tower. The live CD loads, I select Install Ubuntu, I get to the screen with the system checks, I hit install and... crash.
I'm guessing it's a hardware issue as I have it installed on 3 other computers no problem. Here are my specs code...
I've tried the 64bit and 32 bit versions, same thing. I tried installing it with Wubi, I reboot and it crashes shortly into the install. Is any of this hardware incompatible? Any suggestions I can try?
I just installed Ubuntu on my girlfriends laptop. The install went fine, but after it tried to restart, it wouldn't boot into Ubuntu. I was reading a thread about someone with a similar problem, and replied in that thread as well, but no responses to me yet. One person said to go here and run the script and post the output. I did that, and this is what I got code...
View 9 Replies View Related