Debian :: How To Remaster Jessie Installation
Oct 9, 2015I'd like to remaster my jessie system (with my own preferences) but i cannot find any tools on jessie like ubuntu has.
View 4 Replies
ADVERTISEMENT
Debian :: Making Remaster - Creating LiveCD From Existing Image
Jan 10, 2011I'm looking for a way to create a live cd from the existing image. I'd like to include some sort of installer, I've found gui remaster utilities, but none for the shell only. I need to setup the image to automatically login, so the user could just pop in the cd and start it up without a monitor or keyboard.
View 10 Replies View RelatedDebian Installation :: Jessie Won't Boot
Sep 26, 2015I have two desktops running wheezy for years without problems. Recently, I reinstall jessie on one of them and won't boot anymore.The hardware is pretty normal: Asus motherboard, 12GB RAM, Nvidia video card, SSD hard drive, .After the install of jessie finishes, the very first boot failed, which means it hung up forever. The part that is annoying is that it fails at different places whenever I try.
For example, something, it fails at the following:
[ OK ] Started LSB: REP portmapper replacement
[ OK ] Reached target RPC Port Mapper
Starting LSB: NFS Support files common to client and server
Sometimes, it failed at start job is running for lsb set console font.It even failed to the console. When it goes to the console login, I can't put any user name or password. It's all frozen.The problem appears to be video card problem. But it worked fine in wheezy.
Debian Installation :: Jessie Update Failed
Aug 16, 2014I installed debian jessie with kde on my laptop a month ago and everything went fine. I tried today to update the packages (805!) via apper but i get the following error message:
Error : Removing a protected system package is not allowed
WARNING: You are trying to remove the following essential packages: sysvinit-core (due to sysvinit)
Debian Installation :: Booting Jessie 64b With UEFI From USB
Sep 30, 2014I have this new computer (MSI Ge70 2PE Apache Pro) that came with Windows 8 and UEFI. I freed space to make a partition to install Debian testing 64bits on the same HD where Windows is. I had no problem making the partition but after that I tried making a bootable usb to install Debian using the dd command and it didn't work. So I tried with an install dvd and even when I changed the boot order in the bios it didn't work.
After reading some more I realized that there could be a problem trying to boot a normal installation dvd with UEFi so I disabled Secure Boot and then switched the boot mode on my Bios to UEFI with CSM. Again it didn't work and it booted directly into Windows. So I switched the boot mode to Legacy. This time Windows didn't boot directly but I get a "Reboot and Select proper Boot device" message on a black screen.
I now realize that I need to install a UEFI "version" of Debian along the UEFI version of Windows 8. I guess that's why it didn't work with the Legacy boot mode. URL...The installer does not provide a convenient way to install an UEFI boot loader, so you are going to install a regular BIOS boot loader at first, and switch to UEFI later.
Use the expert mode and format your hard drive with a GUID Partition Table (GPT). Create a small partition (1 MiB would be far enough), type it as a BIOS Boot Partition (this is the untitled flag above the “bootable” one in Partman), do not format it and do not mount it: this will be needed for BIOS booting. Create another small partition (same kind of size), type it as an EFI System Partition (this is the“bootable” flag), format it as FAT and mount it on /boot/efi: this will be needed for UEFI booting.
Debian Installation :: How To Select KDE In Jessie Installer B2
Oct 28, 2014I wrote the hybrid DVD image for DI b2 (Jessie) on the USB drive and booted from it (UEFI mode). But I don't see KDE there in the advanced options. Was it removed from the image, or desktop environment selection is moved to some late stage now?
View 2 Replies View RelatedDebian Installation :: GUI Flickers After Upgrading To Jessie
Mar 12, 2015I have just Upgraded debian wheezy to jessie but after upgrading , the gui seems to flicker areas of gui are not repainting on closing applications ,windows do not render properly.
View 5 Replies View RelatedDebian Installation :: Bluetooth Not Working On Jessie
Mar 20, 2015How to get Toshiba Satellite's bluetooth to work. Here is output that I think may be useful.... but I could be wrong. Pretty much everything I have found is outdated, has dead links, or didn't work.
So far, I've learned (at least from what I've understood) it has to do with kernel drivers/modules not working. I'm on Jessie right now since my graphics driver didn't work on the stable kernel.
lspci
Code: Select all00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1566
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 05)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 156b
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
[Code] ....
Debian Installation :: Kernel Backport For Jessie (8.0)?
May 16, 2015I installed the 32 bit version of Debian Jessie (8.0) on an Asus X205TA. The Asus X205TA laptop is quirky like a lot of Intel Baytrail Atom laptops/tablets in that it has 32 bit EFI but a 64 bit capable CPU, and installing Linux on them is an exercise in frustration. Jessie is probably the first distro to support 32bit EFI out of the box, and the install went surprisingly smoothly. As expected the sound and built in WIFI does not work, but everything else seems to work well.
I spent half a day compiling the 4.03 kernel but it crashes on boot, and I ended uninstalling it in frustration.
Is there any backport of the 4.0 (or 4.1 which is currently a release candidate) for Jessie? Debian also seems to have pulled the kernel image off of their "experimental" repository.
[URL] ....
Debian Installation :: Overwrite Wheezy With Jessie
Jun 20, 2015I already have a Notebook with windows (for some reason it needs 3 partitions..) and wheezy. When I installed wheezy I create 2 logical partition inside a primary one: one logical for /home and the other one for filesystem. Now I would like to overwrite wheezy and get get jessie, but without touching windows and home.
I already try to upgrading and it went wrong, so I prefer overwrite, what I have to do during "manual installation" phase?
Debian Installation :: 8.3.0 Jessie - Some Programs Don't Open
Feb 27, 2016I have a new installation of Debian 8.3.0 Jessie which I have been playing with and enjoying for a couple of weeks. Ever since I installed the operating system to my computer, I have noticed a few different programs just won't open. For example Nepomuk Back Up and Nepomuk Cleaner. I do not know if these programs shipped with the original installation or if they got installed with a package later, but when I try to open these applications the ball just bounces for a minute then disappears. I went to my package manager and uninstalled these applications and then reinstalled them, but there has been no change in behavior. Gparted also does the same thing, but with Gparted the little ball bounces for quite awhile before it disappears.
View 14 Replies View RelatedDebian Installation :: Installing Jessie In Virtualbox Fails
Aug 6, 2014I'm just trying to install a Jessie i386 image in Oracle Virtualbox.
My host specs are:
Windows 7 Home Premium x64
Wheezy is installing correctly, but Jessie is not. It fails during the partitioning of the disk, and gives an error message like: unable to write to disk, start = 236342 length = 0. This is not the exact message but I'm unable to try again at the moment.
When I install Wheezy and apt-get update / upgrade to Jessie, I get a black screen after reboot..
Debian Installation :: Tty2 To Tty6 Have Disappeared In Jessie
Nov 14, 2014I just installed Jessie amd64 for the first time. Few problems so far, but Alt-F2 to Alt-F6 no longer switch to another tty - there's just a black screen with a flashing cursor that doesn't respond to keystrokes. I rely on being able to switch between ttys a lot, so this is inconvenient.
I've searched and found a workaround for grub2, but I'm using grub-legacy (and don't want to switch to grub-pc as it's over complicated IMO). Graphics hardware is AMD 780G/SB700 (using firmware in firmware-linux-nonfree).
Debian Installation :: How To Install Libpam-mount On Jessie
Dec 4, 2014I have been building a debian jessie system reasonably successfully but have come unstuck with libpam-mount. On a previous Ubuntu saucy system I simply installed it, created the appropriate pam_mount.conf.xml file and mounts would happen when users logged on and dismount on logoff. With jessie I can see that there is a libpam-mount package in main but when I try apt-get install it fails. If this package has been obsoleted (as one of the messages indicates might be the issue) what is the jessie way of handling this?
Here is my sources.list
Code: Select alldeb http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
deb-src http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
[code]....
Debian Installation :: Install Jessie From RC1 Or Do Upgrade From Stable?
Mar 7, 2015I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.
View 8 Replies View RelatedDebian Installation :: Custom Keyboard Layout On Jessie
May 23, 2015I was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:
- Defining my layout here: /usr/share/X11/xkb/symbols/gb
- Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem
Code: Select all <variant>
<configItem>
<name>accentsFR</name>
<description>English (UK with french accents)</description>
</configItem>
</variant>
- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst
Code: Select all accentsFR gb: English (UK with french accents)
So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)
Here is the snapshot of the keyboard input source settings: [URL]....
Debian Installation :: Jessie 8.1 - Mirror Does Not Support Specified Release
Jun 17, 2015I am doing a new Debian install on an older Dell laptop (Latitude D520, but that should not matter). I downloaded the net install .iso, burned it to disk, and ran it. Everything was progressing like any other installation I have done until I was asked to pick the mirror. I chose ftp.us.debian.org like I normally do and it was rejected. When I checked the output on virtual console 4, I am seeing the message "mirror does not support the specified release (jessie)."
I tried a bunch of random mirrors, including international ones, and they all give me that message.
Debian Installation :: Jessie Install With Switchable Graphics
Jul 20, 2015Somehow got it partly to work. I have a new installation and I am using the 4.1 kernel now. I can switch on the Radeon chip which is great, but still have some trouble when trying to turn it completely off.
I have an Acer Aspire 4820TG Laptop with:
Core: i7-640M
integrated graphics: Intel
discrete graphics: Radeon Mobility 5650HD
I have installed Debian Jessie. After installing the non-free firmware for my ATI chip (following [URL] .....) so I could use vgaswitcheroo, the system broke.
The problem looks as follows: When I start the system the graphical login screen gets stuck and the console tells me first:
Code: Select allradeon 0000:01:00.0: Userspace still has active objects!
then a lot of numbers, then
Code: Select allradeon 0000:01:00.0: ring 5 stalled for more than 10000 msec
[drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35).
[drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).
and this repeats once (or twice?) until several new messages arrive.
Those pause at
Code: Select allFixing recursive faul but reboot is needed !
Then again lots of more error messages until the everything freezes, with the last message
Code: Select all---[ end trace 13dfd971ff8e0aed]---
(Might contain typos. I don't know how to get the whole messages since the system dies a minute after booting and I only have a few seconds after the error messages start)
Even when I prevented the xserver from starting at boot I still got the same problems.
I would very much like to be able to switch between my chips, because I can only use external monitors when the ATI chip is active, but I would also like to be able to use the battery saving internal chip option.
I also tried to install the proprietary driver (though I would prefer if I didn't have to do that), but I couldn't get the xserver to work while it was installed.
lscpi output:
Code: Select all00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
[Code] ....
Debian Installation :: Upgrade From Squeeze To Wheezy Or Jessie
Jul 28, 2015is it possible to simulate upgrading a Squeeze installation to a Wheezy or Jessie installation, on a OVH server ?I would like simulate upgrading server, and if not problems, upgrading in real time.I don't do that manipulation, and I don't do mistakes on a production server.
View 2 Replies View RelatedDebian Installation :: Creating And Booting Jessie Installer
Aug 15, 2015I am installing Jessie to a dual-boot Dell Inspiron 1150 laptop currently booting Windows XP + Ubuntu 9.04. I downloaded the small installation image:
Code:
Select all//cdimage.debian.org/debian-cd/8.1.0/i386/iso-cd/debian-8.1.0-i386-netinst.iso
and created a live dvd using growisofs.
The Jessie install documentation says: "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from." For the downloaded image this produced the result
Code:
Select all~$ md5sum debian-8.1.0-i386-netinst.iso
095a83b715e1b74b6d30b2259275f4af debian-8.1.0-i386-netinst.iso
There is no MD5SUMS file in the download directory. There is an md5sum.txt file included in the iso image: this lists the md5sum of every file in the image, but not that of the image itself. The check for the burned dvd was successful :
Code:
Select all~$ dd if=/dev/cdrom | head -c `stat --format=%s debian-8.1.0-i386-netinst.iso` | md5sum
645120+0 records in
645120+0 records out
330301440 bytes (330 MB) copied, 1.28047 s, 258 MB/s
095a83b715e1b74b6d30b2259275f4af -
Is this a documentation error ? I next booted the laptop from the live installer dvd. After generating a number of messages, it stopped displaying a message along the lines of: "Invalid video mode - press Enter to select a mode".
I assumed it would wait for me but it soon rushed on, producing screeds of segmentation fault error messages, eventually slowing down to a rythmic display of:
Code: Select all*** Error in Xorg:free() invalid pointer: 0xb7101ce3
***Surely it should have waited for me to press Enter?
Debian Installation :: Upgraded To Jessie 8.2 Now Boot Hangs
Dec 4, 2015I had Debian 7.9 up and running like a charm until yesterday. Today I did the upgrade to 8.2, now boot hangs. I see 3 boot entries for the new kernel now -
Debian GNU/Linux, with Linux 3.16.0-4-amd64
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (sysvinit)
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode)
The latter 2 entries have no problem booting up. So do the previous kernel(3.2.0.4) entries. Only the first one hangs, for which I see these 6 lines on the console:
[ 0.214704] pnp 00:04: can't evaluate _CRS: 12298
Loading, please wait...
fsck from util-linux 2.25.2
/dev/mapper/myhost-root: clean, 198627/61000000 files, 2160052/24412 blocks
[ 0.047141] kvm: disabled by bios
[ 0.000985] kvm: disabled by bios
How can I make it boot up like others?
Debian Installation :: Upgrading One Particular Package From Jessie To Stretch
Jan 8, 2016I have installed Package: gnumeric (1.12.18-2) in my Jessie/Mate system. It is very jittery on scrolling, and I was wondering if I should upgrade to the version (1.12.26-1) in stretch(testing), as there seem to have been a large number of bugfixes.
I have tried the following simulation command, but it gives the error message shown:
Code: Select all~# apt-get --simulate -t stretch install gnumeric
Reading package lists... Done
E: The value 'stretch' is invalid for APT::Default-Release as such a release is not available in the sources
The documentation suggests that I may need to create an apt preferences file. I do not have any of the following files mentioned by the apt-get man page:
/etc/apt/preferences/etc/apt/preferences.d/etc/apt/apt.conf
What I would like to do is upgrade just the specific package jessie/gnumeric(1.12.18-2) to stretch/gnumeric(1.12.26-1). I do not want any other packages to be inadvertently upgraded to stretch. I have seen warnings that one can easily end up with a badly mixed system and I wish to avoid that! I also do not want to disturb the standard apt-get update, which I am running daily via anacron at present.
Debian Installation :: How To Install Musescore 2.0 (sid Package) On Jessie
Jan 25, 2016Musescore 2.0 is available but only for Sid, I have just installed Jessie since I wanted the stable version. I was wondering if it was possible to install that packaged only from the sid distribution on jessie. How should I proceed?
View 9 Replies View RelatedDebian Installation :: How To Access Unmounted Partitions In Jessie
Feb 6, 2016I have recently installed debian jessie on my laptop , during installation i didn't mount 2 of my partitions , now when i want to access them i have to give the root password every time i click on them , i searched the google , i found that i have to add a line in fstab file : so i i checked the partition that i wanted to mount (by typing fdisk -l) , and i added this line to the end of the fstab file :
Code: Select all/dev/sda3 /mnt/2 ext4 users,noatime,auto,rw,nodev,exec,nosuid 0 0
(i had created /mnt/2 before ) ..... and this is the output of fdisk -l :
Code: Select allDisk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x4a373773
[Code] .....
After adding the line at the end of my fstab file , something strange happened , i rebooted the computer and mate didn't come up , it was a console like screen , i had to access fstab from there to delete the line and enter mate . i did this for 2 times and both times the same thing happened . How can I mount my partition permanently ?
Debian Installation :: After Jessie Upgrade No WiFi / IP Address
Feb 7, 2016I upgraded my laptop from Debian Wheezy to Jessie the other day, and just as before my wifi auto-connects to my router, and I can "ping http://www.google.com" just fine, but only for like a minute. Then the Internet access dies, but I'm still connected fine to my router, and I can ping its IP address. If I connect to the router through cable / eth0 everything works just fine, and I have full Internet access.
I assume there is something wonky with how ip address is assigned after the upgrade, how can I fix this, or trouble shoot further?
(I run Gnome desktop, with network manager).
Debian Installation :: Can't Choose Jessie In Boot Time
Feb 29, 2016Some thing quite bad happened to me , i installed debian jessie about 2 month ago. Today I wanted to try what a gnu/linux is like so I installed dragora 2.2 on one of my free partitions , (sda 1 is my debian root , sda2 is my debian home, I had sda4 which nothing was on it so i installed dragora on it. But something bad happened , during boot time you get this page which asks you what distro you want to enter in past I had just one choice and it was debian jessie, I expected after installing dragora I will see 2 distros on this page, but i get just 1 , and that's dragora ... but maybe i should mention this that when entering dragora i can access all my previous files , debian systemfile , debian home , they are still there but i can't enter debian jessie ...
View 2 Replies View RelatedDebian Installation :: Install 8.3 Jessie Without Downloading Updates
Mar 19, 2016I have noticed that when installing Jessie, the graphical installer downloads updates to packages while installing if connected via Ethernet to the Internet. Remaining disconnected solves this problem. Is there any way to avoid this and install without downloading files other than apt lists?
View 3 Replies View RelatedDebian Installation :: System Hanging On Upgrade To Jessie
Apr 5, 2016I have an asus eee 1015px, which was running dualboot windows and wheezy with no problems (except the browsers seeming to take up a lot of CPU). Today having backed up everything, I wanted to upgrade to jessie. URL...
Everything seemed to be progressing fine, no strange messages, it took 1 hour for
Code: Select allapt-get upgrade
but maybe that's normal. However, then when I did
Code: Select allapt-get dist-upgrade
It froze at 17.30 with a weird screen. The sort of thing you never want to see on an install, a sad face and blocks instead of text.
pic: URL...
Then it moved on and gave a readout, which seemed pretty ominous
pic: URl...
It then moved and gave a readout, hanging again:
pic3: URl...
Now it seems to be in loop, moving on every 15 minutes or so but always ending up with the same screenful of text shown in the foto below, which ends with the last line reading like this:
Code: Select all[17798.587776] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
or later
Code: Select all[20209.229273] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
This pic shows the full screen: URL....
This is baffling for me I'm not very experienced with debian.
Debian Hardware :: Jessie Installation By Wireless Connection
May 30, 2014My wireless connection doesn't work at the Debian jessie installer. This problem appears both on netinst installer and dvd-1. I try to install by USB key. I get message: network key exchange failed. I've tried to disable wifi WPA2, however I can't connect even then. This problem doesn't appear on Debian wheeze installation.
View 8 Replies View RelatedDebian Installation :: Failed Wheezy To Jessie Upgrade (cannot Boot)
Aug 13, 2014I upgraded from deb7 to deb8, but am no longer able to boot. After passing the grub boot menu, the following messages are displayed:
Code:
Select allLoading, please wait...
[ 6.065713] systemd-fsck[148]: /dev/sda1: clean, 428644/1310720 files, 410616
9/52442880 blocks
[ 7.480551] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.692700] systemd-fsck[341]: /dev/sda5: clean, 145485/6176768 files, 17407409/24695552 blocks
[ 18.066215] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead
_
The screen then clears and an underscore is displayed as the sole character at the top left position of the screen. The system hangs at this point. During installation, I rejected two changed files: /etc/init.d/bootlogd and /etc/libreoffice/sofficerc. For both, I opted to keep the installed version (the default choice of the installer) rather than replacing with the new version. The first might be related to the problem, although it seems to be responsible only for logging the boot process, and I would not expect this to compromise booting.
In case this information is useful, sda1 is mounted at /, sda2 is swap space, sda3 is extended, and sda5 is a logical partition mounted at /home.
I am able to boot into rescue mode, but other than that the system is not usable. Unfortunately, no useful error messages are given to aid in diagnosing the problem.