I'm trying to install the GD library from the Add/remove software app, but it will not install because it says that it can't resolve a dependency "PHP-common", however, this IS installed, yet it keeps giving me this error. Is there a work around to this or a way to fix the dependencies problem?
View 2 Repliesi have Elastix (( Centos )) machine runing and have many configrations i need to take iso iamge from it and use it directly for any othe machine ? How to this step bby step ??
View 1 Replies View RelatedI am unable to install CentOS V5.4 on my work station.
After collecting the config info (root password, etc.) the installation immediately gets disk write errors while doing PVCREATE.
I'm installing from the DVD to the 136GB SCSI drive. The drive is known to be good and is writable as a Windows
volume.
The scsi drive is the only drive selected for installation.
I've selected to delete all partitions on the volume and install default configuration however the new partition is not created. code...
I've been happily running Centos 5 (in fact kernel 2.6.18-92.1.22.el5) for a while now.Today, I tried to install Audacity and although it installed OK, when it ran, it came up with 'library incompatibilies'.I looked around and found someone who had installed using ....
audacity-nonfree .... blah blah
compat-wxGTK26 ... blah blah
I installed these and Audacity ran OK ....However, then the problems started.I'm now getting a message from the software updater telling me that 185 packages need updating! I've tried letting it update and it downloads, checks dependencies and then stops without any upodates. Each reboot tells me the same thing.It seems obvious that no updates are in fact needed and I'd like a way ofstopping the message appearing.
I download the xxxx.tar.bz2 file
extracted it,
when i run ./configure under the directory i get the following error code...
i even followed the link http://wiki.winehq.org/WineOn64bit
also http://forum.winehq.org/viewtopic.php?p=28622&sid=17383eb0b922b2c230238f9ab50b265a. and several googling.
i think the architect of the OS and the wine is not matching.
So guide me to solve the above problem.
the output i get on "uname -i"
x86_64
Ive installed X Window System and GNOME Desktop Environment on my server. I am running CentOS 5.3 btw. Ive installed and tried running it but i get error no display specified. GRRRR. I cant seem to find the file where i can specify a display. Im trying to setup a gui so i access my server via vnc cause im kinda a linux noob.
View 1 Replies View RelatedI want to migrate my Debian server to CenOS. The Debian server has the following partition layout code...
When I try to map Logical Volume 'home' to '/home' en choose the 'Leave unchanged (preserve data)' option I get the following error:
The current requested size ( 947904.00 MB) is larger than maximum logical volume size ( 262144.00 MB).
To increase this limit you can create more Physical Volumes from unpartitioned disk space and add them to this Volume Group.
There is something wrong with the Xwindows start of my centos5.4 ( 2.6.18-164.el5 X86_64). After several times to try to start the Xwindows, there is a warning message as following:
gdm[5917]: The display server has been shut down about 6 times in the last 90 seconds. It is likely that something bad is going on. Waiting for 2 minutes before trying again on display :0.
I recently updated CentOS and PHP from 5.2 to 5.3. I ran into this issue though code...
I attempted to re-install memcached and got memcache.so moved to the appropriate module folder and updated php.ini. I am not sure if the updates removed other dependencies or if this is related to my CentOS update.
I have been using Eclipse(Helios) in centos5. my eclipse is getting core dumped frequently.is there any solution to solve this coredump.
###################################################
# vi /etc/security/limits.conf
Make sure the following config directive exists:[code]..........
The install went fine but the only issues is getting the server on the network.
I can't ping any thing other that the ip address assigned to the server.
I did it through the gui , the command line and using ifconfig and editing the ifconfi-eth0 file and nothing works.
any ideas on how to get this to work.
i see nothing wrong in the messages.log file either.
We have upgraded CentOS release 5.6 (Final) with 2.6.18-238.9.1.el5 kernel. After the reboot all configuration files under /etc became READONLY. my file system's still in rw mode.code...
View 2 Replies View RelatedI am using Centos 5.2, and I installed all of the available gnome and gnome development libraries available via the "add software" menu item. Still, when running some programs, I get the following error message:
"error while loading shared libraries: libzvt.so.2: cannot open shared object file: No such file or directory"
If I understood it correctly, libzvt.so.2 is part of some gnome libs... where to find and how to install them?
i am a fresher to linux. presently i am using CentOS for getting some experience in that. but i have a problem with internet connection using in CentOS. i am using prolink USB ADSL2+ modem (H5200U). so, i request from all readers to give alternative answer.
View 2 Replies View RelatedWhen I am in run level 5, I attempt to delete some 'trash' that has accumulated in the 'Trash' icon on my Desktop/.
When I right click the icon and select the 'empty trash' option, I get a permissions error so I just press the 'cancel' option however the contents of the 'Trash' have been purged anyways. It is working basically but I don't understand why I am getting a permissions error.
[cwilliams@tunafish ~]$ id cwilliams
uid=500(cwilliams) gid=500(it) groups=500(it),100(users)
I am newbie to centos. I am trying to install virtual server in my machine. I have installed the Xen virtual machine monitor which comes with CentOS through add/remove software. Here is the problem, I am unable to open connection with Xen hypervisor. Here is the error i am facing:
Unable to open a connection to the Xen hypervisor/daemon. code...
Let me start off with the usual: I'm a linux newbie but am doing pretty good so far with google by my side. I've come across a problem I cant seem to find an answer to:
I just got a CyberPower 685 AVR UPS. I Installed their power panel software and it works great in CentOS 5.4. When I reboot, the system hangs right after the "Red Hat Nash 5.6..... Starting" message. I've left it for 20 mins so far and it's still hanging. If I unplug the USB data/shutdown cable, within about 10 seconds it starts detecting hard drives and continues booting...
Ive even returned the UPS for another to see if it was bad, and it still is giving me problems.
I'm experiencing some rather severe problems after updating my Centos 5.4 system (Virtual Xen guest). What happens is that when the system boots it complains about missing .so files which prevents about 50% of the services installed from running.
I'm suspecting that it has something to do with selinux for two reasons: 1. The first services to go down complains about the security context of some files, and 2. selinux was kinda the reason I decided to update in the first place as it was disabled when it shouldn't be (enabled in system-config-securitylevel, disabled when running sestatus).
The whole boot-sequence ends with alot of "INIT: Id 'X' respawning too fast: disabled for 5 minutes"-messages (including all runlevels) before it goes stale, and I can do nothing.
The server in question had undergone very little tinkering from my part, pretty much none at all, the only services installed after installation was apache, mysql and webmin.
Details:
CentOS 5.4 is installed on both the host and guest.
The guest runs on an lvm-partition.
I have two other vm's(also CentOS) running just fine, altough I'm a bit weary of updating them .
Attached are some screenshots of the boot-process.
I hope some one here can share some insight on this problem. It's making me pretty nervous seeing that our whole network is run by CentOS-installations (not that I'm certain that CentOS is the culprit).
I am running matlab 2010b on centOS5.6.
Matlab opened without any error either in the computer terminal or in VNCSERVER.
While running bench (of matlab) the session or the vncserver are crashing.
In some cases the bench run for the first time without any problems, however it will crash the session or the vncserver on the 2-3 runs of the same code.
Any idea how to solve this issue?
I installed Tikiwi 3 beta 4 on CentOS 5.3. While installing, installer reported it could not find GD library (graphics). I tried installing all GDxx. Same result.
Anybody know which library Tiki is looking for? Or Tiki bug?
After upgrading Centos 5.4 cluster nodes to 5.5 all virtual services failed to start. All virtual services are marked as 'failed'. The reason: new /usr/share/cluster/vm.sh requires 'which', but this is not reflected in rgmanager-2.0.52-6.el5.centos.
Solution: run 'yum -y install which' on all nodes, and reboot cluster. Hope that will save somebody hours of downtime.
I am trying to add some functions to a Postgresql database. The functions use a shared library which they think is: /usr/lib/pgsql/postgis-1.4.so They say: "ERROR: could not load library "/usr/lib/pgsql/postgis-1.4.so": libgeos_c.so.1: cannot open shared object file: No such file or directory"
I cd to /usr/lib/pgsql/ and do an ls. postgis-1.4.so is there. libgeos_c.so.1 is as well (and it's in /usr/lib/ )
Both the files seem to exist. I cannot copy either of them (cp says "cannot stat '[file]': No such file or directory".
I need to download the following library: rpmlib(PayloadIsLzma) <= 4.4.2-1
It seems it's on this site, but the site is having issues or something: [url]
This machine is not connected to the internet nor can it be.
I installed the libg2c.so.0 library [url] and now am having to insatll its dependencies.
To see links, copy and paste in browser and remove spaces. I don't have 15 posts yet to post links!
I recently upgraded to php 5.2 using the testing repository. All went well except for one extension.
root@clibweb2 ~]# php -v
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules//usr/lib64/php/modules/http.so' - /usr/lib64/php/modules//usr/lib64/php/modules/http.so: cannot open shared object file: No such file or directory in Unknown on line 0
PHP 5.2.10 (cli) (built: Nov 13 2009 11:44:05)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
[root@clibweb2 ~]#
I tried:
[root@clibweb2 ~]# ln -s /usr/lib64/php /usr/lib/php
Adding the complete path to php.ini
And using PECL
I still get the error.
Output of
getinfo.sh (general) is at [URL]
The Package specific is at [URL]
./configure script fails to configure libsf. Please check the following last few lines of configure script error.
But find command shows the following;
It seems the file libdb does exist. man dbopen displays man page for dbopen. I also tried to ln -s /usr/lib/libdb.a and libdb.so /lib dir but all were in vain.
I use CentOS 5.3 with kernel 2.6.18-128.1.6.el5 for Clonezilla. It would be simpler for me if any of IDE or SATA drives detects as /dev/sdX device. Because when I cloning computers with Clonezilla it is matter which type of drive connected to cloned computer. So I must firstly clone computers with IDE drives, after that with SATA drives. If all drives would detected as /dev/sda I would can clone all computers at once! Is there simple way to enable new libata library without recompiling kernel? Is there already compiled kernels with this feature?
View 7 Replies View RelatedOn a new install of CentOS 5.3 I am trying to make the Logitech MX Revolution mouse work (I did actually succeed in configuring it by BTNX on my previous machine, but can't make btnx work now...). I am following the instructions from [url] works. However, when installing the xmacro package it complains about a missing library: libstdc++.so.6(GLIBCXX_3.4.9)(64bit). The library is available in Fedora but not in CentOS. I guess installing the Fedora library is unwise...?
Does anyone know how to make xmacro work?
Also, in xorg.conf it seems (from other posts etc) using the evdev driver for the mouse would be advisable.
However, when I change from [driver "mouse"] to [driver "evdev"] X cannot start. In the xorg.conf logfile (/var/log/Xorg.0.log) it seems like the evdev driver is not compiled:
I don't really understand the error, but it seems to me, that the evdev driver is not compiled... The evdev driver should, though, be installed (through the package xorg-x11-drv-evdev-1.0.0.5-3.el5.x86_64)
If this is right, how, then do I compile the evdev driver?
I have tried to compile the fakeroot 1.15 on centos 5, but it always failed to load the shared library libfakeroot.so file. I tried compiling 32 as well as 64 bit version of library but always it failed to load the library and give the following error:
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
any workaround to get this working?
Summary: Does a discrepancy between MySQL client library 5.0.x and MySQL server of 5.1.50 cause "inconsistent behavior", as reported by phpMyAdmin? The longer version: Windows Sysadmin taking the plunge into Linux. I tried to spare you all the rookie questions and did a fair bit of reading. I'm rather happy I was able to get CentOS 5.5 installed and running, configured iptables, got the kernel updated, Apache, MySQL and PHP installed. Then upgraded PHP to 5.2 after I figured out how repos and priorities work.
I got phpMyAdmin installed and running, then decided to upgrade from 2.11 to 3.3.7 but it keeps complaining that my MySQL client libraries are something like 5.0.63, while my server is 5.1.50, and this may cause "inconsistent behavior" or something of the like. So, feeling industrious, I decided to find an updated client.
MySQL-client-community-5.1.50-1.rhel5.i386.rpm
But it wouldn't let me install it as it conflicted with the default mysql-server installation. I also couldn't remove just the old client, to update to a newer one. So I blew away everything mysql on my server and installed the above client
MySQL-server-community-5.1.50-1.rhel5.i386.rpm
and that server file. I'm assuming I'm missing dependencies now as phpMyAdmin claims it can't load the mysql extension. Attempting to 'yum' php-mysql tried to install 'mysql' as a dependency, which immediately conflicted with the files I'd installed. At this point I'm wondering if I'm closing in on successfully installing a version that phpMyAdmin doesn't complain about, or if I should even care that it is complaining and just go back to all the repo versions of everything.
# rpm -e MySQL-shared-community-5.1.50-1.rhel5.i386.rpm
error: package MySQL-shared-community-5.1.50-1.rhel5.i386.rpm is not installed
I am trying to install Ubuntu 9.10 Server edition and I am getting stuck at the language screen... Yep the language screen that comes up as soon as you boot off the CD I have not gotten very far and I am already hitting problems... I am using a USB keyboard but it is working in the bios I don't know if this could be the problem?
View 1 Replies View Related