Other distro's have the ability to remaster (or make), a live cd of their install, is there an easy way to do this with Opensuse?
My thoughts are primarily with a fresh install complete with all updates, then make a live cd. In the event of a disaster a simple install from the live cd would get an updated version back again without the headache of installing updates, codecs etc...
Ubuntu has remastersys, PcLinuxOs can make Live cd's by a default app but i've not seen such things for Opensuse versions >= 11.1.
I'm looking for a way to create a live cd from the existing image. I'd like to include some sort of installer, I've found gui remaster utilities, but none for the shell only. I need to setup the image to automatically login, so the user could just pop in the cd and start it up without a monitor or keyboard.
I installed Fedora with some useful programs for my job. I would like to make a live cd (or dvd) of my system (with programs and repositories list), so I can install it to 5 other computers I have.I found revisor but I think it's not what I'm searching.In Ubuntu I was using Remastersys and that's what I want to do of my system.Since I'm new, if it has a graphical interface, it would be nice. If not, then just explain the terminal commands.
Maybe there _is_ no easy way, but I have a home-made video in Standard Definition on a DVD that I'd like to do some simple editing of and reburn. Just trying to take out some dead air-time.
I looked through this forum lightly, but maybe don't know what I'm looking for.
Is there any not-too-sophisticated tool or set of tools that will let me do this on Ubuntu?
i have Elastix (( Centos )) machine runing and have many configrations i need to take iso iamge from it and use it directly for any othe machine ? How to this step bby step ??
I have ubuntu installed in my desktop . I wanna make an iso of my installation to install that ubuntu in other Machines . Is there any software to create it ?
I seem to have a knack for having systems built that OpenSuse doesn't like. I remembered this afternoon why I gave up on 11.x - the 11.4 LiveCD doesn't like my setup, at least in terms of booting into a GUI. I have uploaded two photos I took of the bootup screen, in case the provide information that might be helpful. I am sorry about the shakiness, I have CP and the the 2nd one is harder to read because of that, but it says something about "amd radeon hd 6800 series (chip ID 0x6738) requires KMS" among other things.
Even though I'm really rusty in CLI, I'm happy to give it a go, to get this working, if possible. The two screenshots are [URL]
FWIW, the 11.4 LiveCD also really didn't like the NVIDIA GeForce 7000M / nForce 610M in my old Acer Aspire 5520 either.
How do you localize openSUSE-11.4-KDE-LiveCD on a pendrive? I have installed bundle-lang-common-hu, bundle-lang-kde-hu, kde4-l10n-hu and yast2-trans-hu and changed locale in both Configure Desktop and YaST but the menus are only half-translated.
openSUSE installed from the DVD on a hard disk is properly translated. What makes the difference?
I formatted my old laptop's HDD completely to install openSUSE with a clean slate plus it couldn't handle XP anymore. I burnt a liveCD and NET CD but none of them boot (not at all) and since its my first experience with Linux I am puzzled. I get this message that operating system could not found (well there is none) and it suppose to boot from the CD I triple checked the boot priority I burnt extra CD's but nothing seem to work.
I am trying to make a liveUSB(my DVD drive run out monthes ago), I use this iso image: openSUSE-11.1-KDE4-Reloaded-LiveCD.x86_64-4.3.1-Build4.1.iso I just cp the file in the iso into the usb, and cp the L : ootx86_64loader*.* into my usb, mv the isolinux.cfg into syslinux and run with syslinux command to install the bootloader. and boot with my usb drive,get Error: .. Loading device nodes with udev Boot logging started on. ... No devices matches MBR identifier: 0x5b265f15 reboot Exception: error console at Alt - F3/F4 ...
I recently downloaded the i686 11.2 and right before it seems as though the Live CD is going to load, with the cursor and the black screen present, it takes me straight to 'linux login'. It states that runlevel 5 has been reached, the failed services in runlevel 5 are postfix and the skipped services are nfs if that's of any significance. I have no idea where to start; looking around it looks as though this is a graphics card issue. My laptop has Intel X3100 integrated video. How can I manage to get the LiveCD working?
(Also, if let it sit at the login for a while, it says "usr/sbin/stop_preload: line 4: /usr/bin/killall: Input/Output error)
I've decided to try openSUSE again, but I'm having trouble with the LiveCD. I've tried both "linux" and "root" which has been mentioned in many places but neither works.
I've installed OpenSUSE with both DVD and liveCD. When I'm in Open SUSE booted from the CD/DVD, my wireless usb is recognized and I can connect to the network using the icon at the bottom right bar. When I install Open SUSE to my hard drive, my wireless usb seems not to be recognized and I'm not offered to connect to a wireless network.
I'm having very strange issues with OpenSUSE 11.3 KDE LiveCD, mainly performance-wise. Most noticeably, it takes 10-30 minutes to actually boot the system, and it doesn't matter whether the LiveCD is booted from the USB or if it's install into the hard disk. There aren't any noticeable errors during boot, though, except a few "timeout" errors and not being able to lauch VirtualBox Guest Additions (which I don't need since it's not run from VirtualBox anyway).
It takes the most time during the "scanning USB devices" section if I boot from the USB, and during the state where it detects the network card/assigns an IP. In both cases, every dot that appears there takes around 2 minutes. During the boot, the PC seems to be mostly idle, and appears to do something only occasinally, when certain parts of the boot sequence are passed, so that makes boot up feel "jumpy" - nothing happens for 10 minutes, then the PC starts accessing the HDD, then nothing happens for 10 more minutes.
There are other performance problems, noticeably during installation to HDD (through the Install option from the CD startup menu - it's quite a bit faster when started from the running LiveCD). For instance, it takes around 5-10 minutes to make the screen where you need to choose the language and keyboard layout responsive. The performance, in both cases, seems to be inconsistent - sometimes it starts booting and responding quickly, the other times it's really slow, up to the point of outright hanging.
System specs: CPU: AMD Phenom II X4 925 4GB RAM HDD: WD Caviar Black 640 GB GPU: ATI Radeon HD 4890
-I could use a hand in installing opensuse on my 2009 Intel Macbook
-I need to use a USB stick for the install, my optical drive doesn't work.
-I am trying to reformat my macbook to run 64-bit opensuse 11.3 instead of Apple's proprietary operating system, OS X
-So I started here: Chapter1.Installation with YaST
-And in this article, under section 1.1. Choosing the Installation Media, i found this sub-section: Booting the LiveCD from an USB Stick.
-So i followed those steps to create a bootable USB stick in Terminal, and i got an error in Terminal and was unable to go any further;
-this was the error in Terminal: dd: bs: illegal numeric value
Would anyone know what the error means, and what i should have typed instead? Is it because my USB stick is generic instead of being a specific type like a U3 stick?
I have been trying to create a live CD or DVD with kiwi, and following the instructions from Portal:KIWI - openSUSE All went well with the building and creation of the ISO image, but when I try to boot it I get:
Failed to mount ext3 clic container Failed to mount root filesystem if I press Alt-F3 (suggested in the terminal)the top most error is tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /read-only/fsdata.ext3 Couldn't find valid filesystem superblock. Something I did find was that it may not have permission to use tune2fs.I haven't done any fiddling with the template supplied with kiwi.
I have openSUSE 11.2 (m8) Gnome LiveCD installed in my VirtualBox and now i want to move the schema to server side. I know, this is not normal, but it's fun - 'Have a lot of fun!', that is what i do in my study time.
So, how can i remove the packages useless for servers in a simple mode? My first idea uses category GROUP of a package, but this not work.
I can, for example, see the packages on System/Daemons, ok, but i can't see a list of groups inside System/ in a easy way.
I am getting a "No devices matches MBR identifier 0x8c71ad6e!" message along with a reboot in 120 seconds message. This occurs after kernel load and at the start of openSUSE boot.
I have checksum checked both images after download. I have attempted the install on CD and USB stick with both images and the result is always the same.
I've included a screen image on my site: No Devices Matches MBR Identifier | Badzilla
I have an Acer Aspire One Netbook. Everytime I try to "burn" the live 11.2 GNOME CD to an USB drive (1GB) it fails on boot. I've tried unetbootin, the application from pendrivelinux.com as well. When it boots, it usually can't find the image. So I have to type in the name of the image by hand then press enter. I actually type the below in:
boot: openSUSE_Linux_(GNOME)
So it starts loading the image in text mode. I don't mind this, except it stops when it tries probing for the CD/DVD ROM.
rebootException failed to detect CD/DVD or USB drive
It just stops pass there. I've tried to add in the options acpi=off, but do I add it in before or after I enter in the image name? BTW, it doesn't boot in my laptop either.
I can not porpperly boot into live CD. I get the option menu in beginning and when i select the liveCD option it starts loading the kernel and then screen gets garbled. full of very small dots. Its liek the graphics card is not recognised propperly. I've read about similar issue here: ATI Radeon HD 3650 AGP boot problem
but as i see the user's specific problem in taht thread was caused by having an AGP card and on an older version. however my card is PCI. it should boot normally. i haven't tried nomodeset parameter mentioned in that thread, but the card shouldn't need it anyway.
I have Ubuntu Jaunty 9.04 updated to 9.10 and have downloaded Remaster from Remastersys. I followed all of the instructions, which were simple enough. However, there must be some instructions missing as the process failed. Working with Remaster through Synaptic Manager, the iso was downloaded into my "home" folder into its own Remaster folder. It was not the iso, like you get when downloading a distro from the Internet, which downloads just an iso onto the Desktop. Inside the folder were a bunch of empty files (I know, because I opened them) and an iso . At this point the Remaster instruction stop. They do not say what to do with the other files, or what they have to do with the iso of my Ubuntu layout. So, like any other iso (once I knew which one was the iso of my setup), I double clicked on it and it ran me through the process of accessing the DVD to burn it. Which I did. I tested it and it failed with some kind of message to the effect that certain files were missing or it could not read it. So, I thought, I would have to do the 'hunt and peck' method and experiment a few times like I did with the ordinary distro downloads until I get it right. But first, I would have to dump the Remaster folder in the "home" folder since it took up so much space on my hard drive. Wrong! I come to find out it is in something called "root" and that I do not have permission to do anything with it but "copy" it. Great. Just great! Now what do I do. I tried to change permissions, but was not allowed to do that either. The only thing I could think of - and dread - was the idea of having to wipe my hard drive and go through the whole reinstall procedures, which takes me days, just because Remaster has locked itself into my system - and there is no 'back door' to get out of it.
I finished downloading of "openSUSE-11.1-KDE4-LiveCD-i686.iso" file. I downloaded it by Opera WB. Then using Nero I burned this file to CD. But there is a problem with boot. Please, make a support to this problem. Maybe file, which is in a site opensuse.org is damaged?
After the reboot of computer this text appears: ISOLINUX 3.63 0x49364136 Copyright (c) 1994-2008 H. Peter Anvin Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Loading Invalid or corrupt kernel image. boot:
I have windows 7 and I'd like to install opensuse 11.3. I have tried with liveCD, live usb, live dvd, but when I click installation, it shows "kernel loading", and when it finishes the loading, all I get is a black screen. Sometimes, when I try with the live CD method it reboots and the same happens again.
In my other computer with XP installed inside, it works immediately. I have tried to change video mode to text and vesa mode, also I have typed "acpi=off noapic edd=off" in the boot options line, but it didn't worked.
The black screen appears not only for the installation option, but also when I choose boot live CD, and check installation media. By the way, I have checked the downloaded iso with md5 checker, and it's the right file.
I tried a LIVECD from Artistx: ArtistX - eXtra ordinary art tools Index of /mirrors/artistx And now my computer boots up into a kernel command line screen instead of the GUI type screen where I enter my name and password. Anyone know what this ##$%@ disk changed on my computer and how do I get it back to normal? Fail safe mode boots ok. On the LIVECD disk I selected boot from hard drive which worked but after I turn off my computer and restart, it goes back into that command line sign in screen and stays there.
I've been in doubt weather to install Linux open SUSE or Mint on my Dell inspiron 1501 laptop. Having tried the latest SUSE live CD (not finding a way to use WiFi) I decided to install Mint (Katya release). Now it turns out there's a bug on Ubuntu/debian related linux distros in connection with Dell Laptops, specifically on WiFi cards by Broadcom. (If you want to know more, check this Ubuntu forum thread and my comment on it.) My question is: are there any known bugs on Dell with OpenSUSE? An additional question would be: is it at all possible to use WiFi with the latest SUSE live CD?
I am super new to linux. I have tried a lot of distros but went with OpenSUSE11.3. I have both gnome and kde live cd. Now to the problem, When I put in the live cd and boot - the computer finds the wireless card and lets me connect to the internet. This works on both versions. But after clicking on the install icon the wireless no longer starts and then I cant get it to work. Maybe its something I should be doing. After all I am new to this.
I am certain that the problem is not with the CD. It can boot on my laptop. It's the RC2 of OpenSuse 11.3 Gnome. When I try to boot on my PC, I get the error "No devices matches MBR identifier: 0x502eadc3".I had some problems when installing Ubuntu, with HDD partitioning because it's SATA3. I tried several things, chandged from IDE to ACHI in Bios, then after it didn't work I simply plugged out all of the Sata cables but still the same. It should be because of Bios settings I guess.I have Gigabyte X58A-UD3R mainboard. Please help, I really love OpenSuse
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
