General :: Cannot Seem To Get Wireless Card To Turn On
Oct 31, 2010
similar to this problem http://www.linuxquestions.org/questi...nstall-673571/ i cannot seem to get the wireless card to turn on. ive tried NTDISGTK and Ntdiswrapper to no avail. it recognizes that the hardware is there, but will not turn it on. in terminal i have tried to force start it, but from what i remember, it gives me an error about authentication (might be access not authentication) ill get back here when i boot ubuntu and take some screenshots, at the moment i's running XP and hating it.
View 4 Replies
ADVERTISEMENT
Apr 2, 2010
turn wireless card on for the Dell Studio 16 (1645) for SUSE 11.2 64-bit.
View 3 Replies
View Related
Jan 13, 2010
dell laptop and went out on thenet looking for a solution for my failed wireless interface. i downloaded the firmware but then my interface still fails to come on after a reboot.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
[code]...
View 4 Replies
View Related
Aug 15, 2011
First of all, trying to install it was a disaster as it tried to format my DVD drive and I was forced to delete my Windows partitions too. That's not why I'm writing, just thought I'd mention that I was already frustrated to begin with
Anyway, I have an HP G62-340US laptop. Everything seems to be running great except that I cannot turn on my wireless. The laptop has a key on the keyboard to power up the wifi and it's permanently off. Not sure if this is an issue with the keyboard driver, but pressing the wifi key does nothing.
I've tried scanning the hardware to determine what wifi device I have, but since it's not powered up, Linux doesn't even see it.
Any ideas which direction I should look?
As a side note, I have used Linux fairly regularly for several years. Mostly Ubuntu, LinuxMint and PinguyOS (all debian-based). So I'm not a complete newbie and am perfectly comfortable with the command line and configuration files.
View 4 Replies
View Related
Aug 13, 2010
I am having issues trying to turn on my wireless card. I have tried to use the ifconfig command to do so, but it gave me an error.
Code:
@ubuntu-laptop:~$ sudo ifconfig wlan0 up
SIOCSIFFLAGS: Unknown error 132
This is what I get when I type iwconfig
[Code].....
View 9 Replies
View Related
Oct 9, 2010
I have installed Ubuntu via USB on a Dell Inspiron E1505 and I am unable to turn on the wireless card. I have a dual boot with Windows XP and I am able to turn on the card with keystroke Function/F2 and it works while in Windows. When I reboot in Ubuntu I am not able to use these keystrokes to turn on the card.
View 4 Replies
View Related
Jan 10, 2011
I have an HP Compaq 6735s with a Broadcom 802.11 a/b/g draft-n wireless card that I've been running 9.10 (the karmic koala one I think it was called) on for the past 7 or 8 months (been running Ubuntu in general for the last couple years). The card won't turn on--the indicator light is always orange, not blue as it should be. I thought it might be a hardware problem so I took it to a shop, but they tested it several times and said the card was fine and that upgrading my software should solve the problem.
I just upgraded it to the 10.10 distro (usually a friend did my upgrades for me but alas that's no longer an option) but that has not fixed it. I thought to try and re-download the Broadcom drivers on a different computer, then transfer them to my laptop, but when I did that and tried to open the .exe file, a message popped up saying the file was no good. (Can you tell I'm not a computer pro yet? Haha) Any idea how I could fix this or what the problem might be? I'm really frustrated as it's been an issue for the last six months, plus this is my only computer and I need it to function fully for purposes of finding a job, etc. If I could I'd just buy a different computer at this point (really disappointed with HP laptops in general) but sadly that's not an option. I'm to the point where I'd consider running Windows again just to make the damn thing work.
View 3 Replies
View Related
May 6, 2011
Alright so i have two drivers installed for my network wireless card and the damn thing still dont work. What do i do ? does anyone have any suggestions.is there a special way to turn my network wireless card on? i mean i see it but its just not turning on and scanning
View 5 Replies
View Related
Aug 13, 2009
Is there a command to turn off my Broadcom wireless card to save power. In Apple, the have an Airport off listing under the airport menu, Is there something for Fedora?
View 3 Replies
View Related
Sep 11, 2009
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
View 12 Replies
View Related
Nov 9, 2010
I have a Dell Latitude E6500 running Opensuse 11.3. As far as I can tell the module for my wireless card is loaded correctly and it's working:
Code:
sudo lspci | grep -i wifi
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Code:
[ 556.642557] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 556.642560] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[Code].....
The funny thing is that it works fine in a Fedora installation, which has an older kernel and older drivers, on the same laptop. The fact that the indicator light doesn't come in when the physical switch is turned on suggests it's something to do with that switch.
View 6 Replies
View Related
Mar 29, 2011
The lock on the card broke off and I tried using tape in that groove, but is too thick for my camcorder. I navigated /media > Context Menu > Properties > Permissions tab > File access, and chose Read and write, but this didn't allow my camcorder to record with the card. Unless there's a way to unlock it with software, I'll try switching the insides with the casing of another. I just want to know what is the best type of SD card or Mini SD adpter to do the trick, i.e. what has the best lock.
View 1 Replies
View Related
Mar 9, 2011
I have an ACER Travelmate 32600-4542. The original OS was windows XP. I installed Linux Mint 10.0. I ran that a little while and for some reason it wasslow and would occasionally freeze for a few seconds at a time. I got sick of that andid a clean install of Slackware 13.1. The problem I am having now is the wireless won't come onI try to switch the power switch and it will not turn on. I am fairly new to Linux and don't even know where to start to find out why it isn't turning on. I didn't have any problems with it turning on with Mint.
View 3 Replies
View Related
Jan 2, 2011
I have a hp zd7249cl laptop and have installed ubuntu 10.10 on it. The main problem I am having at the time is the wireless button will not turn on so there for I have no internet access. The switch works fine in windows, but not in ubuntu. The switch didn't work with the live cd either, but I thought it might after install. The wired card that is in the laptop is no good and quit working a couple of years ago so all I have is wireless now.
View 9 Replies
View Related
Apr 12, 2011
Wireless does not turn on until nic cable is plugged in. Soon as I plug in a nic cable the wireless light on laptop comes on.
View 4 Replies
View Related
Nov 4, 2009
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.
I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
View 1 Replies
View Related
Feb 16, 2010
I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
View 8 Replies
View Related
Jan 29, 2010
i'm run'n knoppix 6.5 (i think) from a usb stick. under 'ifconfig' it finds 'eth0', but when i put in 'iwconfig eth0' it says: 'eth0 no wireless extensions'. i've tried other linux live cd's but to no avail...interestinly enough, when i run a linux (ubuntu) live cd on my virtual pc it hooks up(?..i figure bcuz its reading from da virtual ethernet?) further more, i researched it to the conclusion that the driver is not being detected. i tried ndiswrapper (under 'puppy') but tht didnt work either ( i've downloaded the lastes version of ndiswrapper and i plan on trying it again w/ the installation disk of the wireless card). however, even in my research i've seen there seem to be a difficulty in getting this particular driver to work? (netgear wg311v3 - wireless g pci adapter) how i can over come this problem? i'm kinda new @ linux, but i like the challenge. it doesnt matter wat linux system (the responder) i'll download it. but i'm really trying to get 1 online cuz i have to learn how to work the packaging systems.
View 4 Replies
View Related
Aug 20, 2009
Where do I get the driver for installing my wireless card- BCM4310 (Broadcom Corporation) in Centos05? I'm not able to find one.
View 3 Replies
View Related
Oct 7, 2009
I'm using fedora 11 and find that sometimes the wireless just turn off by itself. The wifi LED goes OFF and Network Device Control->wlan0 becomes inactive. It usually happens when I open for a long time ( 24 hr ?) I try turning off the wireless and turning on.
View 5 Replies
View Related
Nov 24, 2014
My card Wifi network doesn't turn on, even at loading configuration of the system is failed. I have to wait a long time until the system itself to load.
And when I write ifconfig or iwconfig is displayed in the console interface wireless card.
And when I come in the panel on the network card, it immediately pops up a window that you can not load the network card modules.
I don't know what could have happened, I do not recall that I recently messed with the system.
Here are the pictures: [URL]....
And here I join dmesg.log file, at the end of a failed: [URL] ....
I have linux mint 17 quiana cinnamon
View 4 Replies
View Related
Apr 14, 2010
I have installed ubuntu 9.10 on my laptop. It has a 802.11n wireless card.
When I boot up to ubuntu, the wireless does not work. And if I connect to a wire network within ubuntu, it works.
Ubuntu can't detect any of the Wifi network in my home (other laptop can). And I click 'Enable Wireless' in the notification area, it said 'Device not found' for the Wireless Network.
The card is 'Intel Wireless-N Card with Bluetooth'
Can you please tell me how can I setup my wireless card in ubuntu 9.10?
View 1 Replies
View Related
Jun 25, 2011
I am playing around with aircrack.
And was trying to see whether my wireless card on my laptop can pass the injection test
And I end up seeing the following... does it mean my wireless card is not able to run aircrack?
root@myubuntu:/home/myubuntu# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11bg ESSID:"" Nickname:""
[Code].....
View 1 Replies
View Related
Nov 13, 2010
Where can I find a driver for this pc wireless card? And how do I install it?
View 1 Replies
View Related
May 23, 2010
i came across BT4 last few weeks ago, and i tried it in vmware and was tempted to know more, so now i wanna try to install it and dual boot. Here's my problem, when installing the install.sh i get 2 options instead of 3 options in the partioner, so i couldnt install BT4 without erasing my W7, also if i do successfully install it, how do i install drivers for my wireless card, ohh and my laptop is a Acer Aspire 4736G, my wireless card is a intel(R) WiFi Link 5100AGN...
View 2 Replies
View Related
Jan 27, 2010
I am using RHEL5 - kernel version is 2.6.18-8.el5 and I want to purches a wireless lan card.
View 1 Replies
View Related
May 2, 2010
I am trying openSUSE after a long break from Linux, but I am running into the original issue I ran into several years ago which made me decide not to use this distro. My LAN card is working fine, and I can get internet hardwired into my router, but I am not having any luck getting my wireless card recognized or working. Also, my notification area on my taskbar (sorry for the Windows terms) is not showing any sort of network status icon.
I have gone Computer>Install Software> and installed the b43 fwcutter thing from the repos, and have also run the following command in terminal:
sudo /usr/sbin/install_bcm43xx_firmware
In Network Settings in YaST, my NIC is showing, but I am still not seeing my Wireless card.
View 1 Replies
View Related
Sep 2, 2009
I am using Ubuntu 8.04 and when I open up my network settings, It shows my ethernet card and my modem but my wireless card doesn't show up. Under "Hardware Drivers" it says that my driver for my wireless card is a "proprietary driver" and that there is no driver I can get for it for Linux. Is there any way that I can get my wireless card to work? I tried going to the HP website and downloading a driver for it, but all of the drivers only work for Windows....
View 2 Replies
View Related
Feb 23, 2010
I'm looking for a wireless card that will work out of the box with Ubuntu 9.10. It has to be a pci card. I purchased a Edimax EW-7128G which the reviews said was a great card for linux but was DOA. I could have it replaced or get a different card.
View 1 Replies
View Related
Mar 31, 2011
How can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies
View Related
