I am having issues trying to turn on my wireless card. I have tried to use the ifconfig command to do so, but it gave me an error.
Code:
@ubuntu-laptop:~$ sudo ifconfig wlan0 up
SIOCSIFFLAGS: Unknown error 132
This is what I get when I type iwconfig
[Code].....
I have an HP Compaq 6735s with a Broadcom 802.11 a/b/g draft-n wireless card that I've been running 9.10 (the karmic koala one I think it was called) on for the past 7 or 8 months (been running Ubuntu in general for the last couple years). The card won't turn on--the indicator light is always orange, not blue as it should be. I thought it might be a hardware problem so I took it to a shop, but they tested it several times and said the card was fine and that upgrading my software should solve the problem.
I just upgraded it to the 10.10 distro (usually a friend did my upgrades for me but alas that's no longer an option) but that has not fixed it. I thought to try and re-download the Broadcom drivers on a different computer, then transfer them to my laptop, but when I did that and tried to open the .exe file, a message popped up saying the file was no good. (Can you tell I'm not a computer pro yet? Haha) Any idea how I could fix this or what the problem might be? I'm really frustrated as it's been an issue for the last six months, plus this is my only computer and I need it to function fully for purposes of finding a job, etc. If I could I'd just buy a different computer at this point (really disappointed with HP laptops in general) but sadly that's not an option. I'm to the point where I'd consider running Windows again just to make the damn thing work.
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
turn wireless card on for the Dell Studio 16 (1645) for SUSE 11.2 64-bit.
View 3 Replies View Relateddell laptop and went out on thenet looking for a solution for my failed wireless interface. i downloaded the firmware but then my interface still fails to come on after a reboot.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
[code]...
I have installed Ubuntu via USB on a Dell Inspiron E1505 and I am unable to turn on the wireless card. I have a dual boot with Windows XP and I am able to turn on the card with keystroke Function/F2 and it works while in Windows. When I reboot in Ubuntu I am not able to use these keystrokes to turn on the card.
View 4 Replies View RelatedFirst of all, trying to install it was a disaster as it tried to format my DVD drive and I was forced to delete my Windows partitions too. That's not why I'm writing, just thought I'd mention that I was already frustrated to begin with
Anyway, I have an HP G62-340US laptop. Everything seems to be running great except that I cannot turn on my wireless. The laptop has a key on the keyboard to power up the wifi and it's permanently off. Not sure if this is an issue with the keyboard driver, but pressing the wifi key does nothing.
I've tried scanning the hardware to determine what wifi device I have, but since it's not powered up, Linux doesn't even see it.
Any ideas which direction I should look?
As a side note, I have used Linux fairly regularly for several years. Mostly Ubuntu, LinuxMint and PinguyOS (all debian-based). So I'm not a complete newbie and am perfectly comfortable with the command line and configuration files.
similar to this problem http://www.linuxquestions.org/questi...nstall-673571/ i cannot seem to get the wireless card to turn on. ive tried NTDISGTK and Ntdiswrapper to no avail. it recognizes that the hardware is there, but will not turn it on. in terminal i have tried to force start it, but from what i remember, it gives me an error about authentication (might be access not authentication) ill get back here when i boot ubuntu and take some screenshots, at the moment i's running XP and hating it.
View 4 Replies View RelatedAlright so i have two drivers installed for my network wireless card and the damn thing still dont work. What do i do ? does anyone have any suggestions.is there a special way to turn my network wireless card on? i mean i see it but its just not turning on and scanning
View 5 Replies View RelatedIs there a command to turn off my Broadcom wireless card to save power. In Apple, the have an Airport off listing under the airport menu, Is there something for Fedora?
View 3 Replies View RelatedI have a Dell Latitude E6500 running Opensuse 11.3. As far as I can tell the module for my wireless card is loaded correctly and it's working:
Code:
sudo lspci | grep -i wifi
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Code:
[ 556.642557] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 556.642560] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[Code].....
The funny thing is that it works fine in a Fedora installation, which has an older kernel and older drivers, on the same laptop. The fact that the indicator light doesn't come in when the physical switch is turned on suggests it's something to do with that switch.
I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
View 8 Replies View RelatedI installed Kubuntu 10.04 on my laptop (HP Pavilion dv5-1010) and the networking was working fine for the most part, but then not sure what happened, the screen just kinda went blank so I restarted the laptop, and now the wireless won't turn on. There's a button on the laptop to turn it on and off, but I can't seem to get that to function in Linux. I'm assuming it's just a simple matter of getting the wireless to switch back on again, unfortunately I can't figure out how to do that .
Edit: I've tried to whole booting into windows and turning the wireless on there, and before that's worked, but it doesn't seem to be working this time around.
Ubuntu 10.4 LTS as a Live CD (intend to dual boot later, testing for now.) Laptop : Acer Aspire 5251-1513 Wireless card: Atheros AR928X PCI-Express
To turn this on in Windows, I have to do Fn F3. But it does not work in Ubuntu. Most of the other Fn keys work, sound, screen, brightness. Found some relative info, but nothing that might be certain
Now, I know there are some issues with that Artheros card, but I think i need to first get it activated.
switched from 4 years Ubuntu use due to Unity, and thus also new to this forum but I hope that you can help me, so I later on can give back to the community.My problem is that the Wireless in Network Manager refuse to go to "on", or to be more correct it goes to "on" for about a second and then back to "off". My computer which uses F15, a Lenovo B560 laptop, have a BCM4313 and the apparent reason is that after that I installed the broadcom-wl and run "su -c 'modprobe wl'" so did I get the response "FATAL: Driver not found". However, the earlier non-existing wireless button in the network manager appeard after the installation, id est the broadcom-wl must have been in plase.
View 2 Replies View RelatedIwlist wlan0 power:
wlan0 Current mode:off
iwconfig wlan0 power on: This does not work
ifconfig wlan0 up: does not work
[code]...
I accidentally clicked a secured wireless which I do not have password. Now every time I open Ubuntu, a window pops up asking for password for the wireless. I am wondering how to turn if off.
View 1 Replies View RelatedMy wifi was off when I upgraded to Windows 7 and can't turn it back on now. I red about aircraft-manager and installed Ubuntu 10.04 newbie, loving ubuntu already!).Installed aircraft-manager 12.1 but it doesn't open and when I shut down a messages informs me that aircraft-manager is not responding. So I thought it was Ubuntu 10.04 and made a Ubuntu 9.04 live USB. Same problem.I have a LG e200 notebook with ATI redeon graphics card and Atheros wireless adapter.
View 1 Replies View RelatedI have a HCL K21 PDC notebook . In windows there is an driver called wconsole.exe or wireless console which help me turn on and off both blutooth and wlan device but in ubuntu these devices are not turned off. I also tried to to use the device buttons but it get activated automatically (but not in windows).
View 4 Replies View RelatedMy wireless is stuck off, i put the command rfkill list and it says
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
[code]...
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View Related====== Wireless Access Point & IP Forwarding Mini-Howto ======Use case: we have a pc (laptop, for that matter) with UBUNTU 10.04, and with wired connection to the internet. We want to connect iPod/iPhone or any other device to this laptop, and browse the internet, effectivelly turning our pc/laptop to a WI-FI access point. At this stage, we would not implement any encryption, so our network would be open to anyone.
Oour pc/laptop have 2 working interfaces, wlan0 and eth0. Device eth0 is the wired connection to the internet, device wlan0 is going to be set up as the wireless access point for the iPod/iPhone or similar gadget. We want to forward any IP traffic attached to wlan0 through to eth0. Interface eth0 can either obtain the IP addres from DHCP server on the router, or it can be fixed, it does not matter. But we definitelly need to set fixed IP address to wlan0, and configure dhcp server to listen on this interface.
===== Things to do =====
configure iptables to forward the traffic from wlan0 to eth0
setup wlan0 in /etc/network/interfaces
[code]....
So I just loaded ubuntu 10.10....and it works great...except for my wirelessi've got a broadcom b43 ...i went into system, administration, download additional drivers and downloaded/authenticated a b43 driver, but my machine (hp dv4405) does not recognize any wireless signals. The wireless light on my computer doesnt turn on (there's a button to turn it on and off) anyways...it's annoying. I guess broadcom recently released some open source drivers, but I'm having trouble sorting through all the info
View 3 Replies View RelatedI have just installed Ubuntu 11.04 in my acer aspire 4710z laptop. After logging in, I am not able to turn on Wireless Radio, hence not able to connect to my wireless router.
arindam@arindam-ubuntu:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]...
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
I'm having problems with my wireless card. The network manager won't allow me to turn it on. It is working in windows and in ubuntu, but I can't get it to turn on under fedora. I'm using a Lenovo B570 laptop and it uses the Centrino Wireless-N 1000 for wireless.
View 5 Replies View RelatedI have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedI have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View Related