I am playing around with aircrack.
And was trying to see whether my wireless card on my laptop can pass the injection test
And I end up seeing the following... does it mean my wireless card is not able to run aircrack?
root@myubuntu:/home/myubuntu# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11bg ESSID:"" Nickname:""
[Code].....
i would really like to know how to patch a wireless card driver so that i can start injection in aircrack for example let's say we have an "Atheros AR5007EG" do you know where to find the driver patch for ubuntu and how to patch it ?
View 1 Replies View RelatedHow can I enable wireless injection?
[code]....
I plugged in a SDCard (SanDisk 4GB) with the write protect On in my Ubuntu system. Ideally this shouldn't have allowed me to write to this card. But it did. And that's when I found that it was getting mounted as a rw filesystem instead of ro. But the same card when I inserted it in another Ubuntu system with write protect On, this problem was not there. So nothing wrong with the Card.
View 3 Replies View RelatedI have the latest version of aircrack, and the latest compat-wireless package installed. When I try to inject I get this:
linux08:/usr/local/sbin # ./aireplay-ng -9 wlan0
16:46:33 Trying broadcast probe requests...
16:46:35 No Answer...
16:46:35 Found 0 APs
I know for a fact that there are 2 AP's. This worked perfectly with my old laptop with a D-link PCMCIA card.
[Code]...
I want to do some pen-testing using aircrack-ng on my local network and currently the only wireless adapter I have is the WNA 1100 netgear adapter. I am using the ath9k_htc driver.
View 7 Replies View RelatedUsing a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again.
However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.
Trying to delete injected code (one line) into multiple .php and .html files of a server with sed command but it seems there is a problem with sed when " and / are included in the string to be deleted.The string that needs to be deleted is <img heigth="1" width="1" border="0" src="http://imgddd.net/t.php?id=16382836"> However the last part of the string (id=########) is not constant (the number is variable) so I used the following:find /home -type f -iname index.html* -o -iname index.php* -o -iname index.html* -o -iname index**| while read FILE; do sed -i "s|<img heigth="1" width="1" border="0" rc="http:\imgddd.net*">||g" "${FILE}"; doneFor some reason it successfuly deleted the injection on .html files but NOT in .php files
View 8 Replies View Relatedi have installed ubuntu 10.10the wireless adapter is BCM4312when i write "ifconfig" it gives me eth1 instead of wlan0 or wlbut the wirless is working fine with me still have the problem that when i try to load airodump-ng eth1 it gives me the follwoing message:ioctl(SIOCSIWMODE) failed: Invalid argumentARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211,ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Makesure RFMON is enabled: run 'airmon-ng start eth1 <#>'Sysfs injection support was not found either
View 4 Replies View Relatedi tried to connect internet in ubuntu 9.04 by using sudo pppoeconf and now network manager is displaying as ethernet device not managed.i couldnt connect internet in ubuntu.how can i enable ethernet card in ubuntu.
View 4 Replies View Related1. When I try to enable Desktop Effects it says "Searching for Available Drivers" then says "Desktop effect could not be enabled".
2. When I play and game the has 3d Modeling, it chops to about 3 FPS and is completely unusable. But heres the deal, I have a ATI Raedon X850XT Platinum card, which I know can handle it. I'm using Ubuntu 9.10 and have everything up to date.
this and well i just downloaded Fusion 14.1. (which is base on Fedora) Everything seems to be working right now except for the wireless....Im running a Dell 1501 with BCM 4311 or 12 something like that. Anyway, I have now idea what is going on as to why my wireless does not work. Im not very good at the command line so i would need step by step instructions on what to do
View 3 Replies View RelatedI'm running Karmic Koala 64 bit on my Lenovo T400 laptop with switchable graphics having both Intel and ATI video cards. I've set my bios to use the intel card only and turned the automatic switching off. So far so good, but I'd like to turn on compiz for basic window animations. When I try to start compiz by selecting
Code:
"Appearance Preferences" -> "Visual Effects" -> "Normal"
I get an error message saying "Desktop effects cannot be enabled"
Code:
"System" -> "Administration" -> "Hardware Drivers"
doesn't show any new drivers that could be installed. This was working out of the box when I first installed Karmic Koala a few month ago, but things got messed up when I installed the restricted drivers for my ATI card. Now I can enable compiz if I switch to ATI from my bios settings and install the drivers but I don't want to use it due to high power consumption and I've removed the ATI drivers.
Here is my xorg.conf file:
Code:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]....
About two days ago was when I was last able to connect wirelessly. I cannot recall a change I made to the system that would have caused this problem. Items to consider:
1. Under Network Manager, I am unable to click "Wireless Networks"
2. I ran the following code under in the terminal (sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rtl|rt2|rt3|rt6|rt7|usb|witch|wl'; iwconfig; cat /etc/modprobe.d/* | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl'; sudo hwinfo --netcard ; cat /var/lib/NetworkManager/NetworkManager.state; sudo lsmod) and proceeded to run enter BIOS where I enabled the Network Driver.
3. I am still unable to get the "Wireless Networks" to even be selectable under the Network Manager
4. When I return to BIOS, the computer shuts down immediately.
5. The start-up menu won't allow me access.
6. I have an HP G60-445DX notebook and an MCP77 Ethernet..
[Code]....
just installed ubuntu 11.04 on my old laptop (Dell latitude XT), to experience this OS. But for some reason I cannot get online, both wired and wireless network are 'grey', and i cannot enable them. Even when I try to go online with a USB wifi dongle,I also cannot enable wireless. Enabling Networking is selected.
I include the information I collect and hope this will allow you to give me a diagnose on how to make my wireless work.
lspci, for the build-in card
Code:
I installed OpenSUSE11.4 yesterday.The dual boot option works.The wireless works in win 7 but I cannot get it enabled in SUSE.Is there a reason why the keyboard keys will not work to enable the wireless.I have an acer laptop.
View 3 Replies View RelatedI installed 9.04 clean yesterday to try and once again move from Windows to Linux and I thought I would give it a real try this time to learn the new OS. Well, right off the bat my wireless connection does not work. By default my WPA/WPK security was set on my router. My wireless adapter does connect to the router but there is no internet access. If I remove the WPA/WPK security and leave it open I can connect and I do have internet access but as soon as I re-enable WPA/WPK security I lose internet access. I even tried WEP security and same result. What the heck is going on with this? I am not going to leave my router unsecured but that seems to be the only way this works. I also upgraded this morning to 9.10 and same problem so this is not limited to 9.04.
View 4 Replies View Related1 ) Machine Brand and Model (PC/Laptop):
Quote:
Dell XPS 1330.
2 ) Wireless Brand, Model and Wireless Chipset:
Quote:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Bus 002 Device 004: ID 05a9:7670 OmniVision Technologies, Inc. OV7670 Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
At this point, I have installed the STA driver for the device, though I have also tried with B43 (fwcutter). I have also tried with ndiswrapper with windows driver. All these cases, the end effect is the same.
I can see "Wi-fi" LED light up. When I bring up the KDE control module for networks, "Wireless" is disabled. However, when I right-click on the network manager icon on the taskbar, I see "Enable Wireless" checked on.
I am wondering if in the process of installing the ndiswrapprer drivers, I am messed up something?
I just want to enable my wireless network card... how do I do that? It worked perfectly in Jaunty and it also worked when Jaunty was upgraded to Karmic, but in a fresh install of Karmic it is displayed as DISABLED:
sudo lshw | grep network:
*-network:0 DISABLED
I know this is not a bug in any kernel or anything. I now have Karmic on two identical laptops (Fujitsu Siemens AMILO, rt2500pci chipset) with the same kernel (2.6.31-22-generic). Wireless is enabled on one, disabled on the other. This is wearing me out... I am on the verge of buying Windows 7...
i'm run'n knoppix 6.5 (i think) from a usb stick. under 'ifconfig' it finds 'eth0', but when i put in 'iwconfig eth0' it says: 'eth0 no wireless extensions'. i've tried other linux live cd's but to no avail...interestinly enough, when i run a linux (ubuntu) live cd on my virtual pc it hooks up(?..i figure bcuz its reading from da virtual ethernet?) further more, i researched it to the conclusion that the driver is not being detected. i tried ndiswrapper (under 'puppy') but tht didnt work either ( i've downloaded the lastes version of ndiswrapper and i plan on trying it again w/ the installation disk of the wireless card). however, even in my research i've seen there seem to be a difficulty in getting this particular driver to work? (netgear wg311v3 - wireless g pci adapter) how i can over come this problem? i'm kinda new @ linux, but i like the challenge. it doesnt matter wat linux system (the responder) i'll download it. but i'm really trying to get 1 online cuz i have to learn how to work the packaging systems.
View 4 Replies View RelatedWhere do I get the driver for installing my wireless card- BCM4310 (Broadcom Corporation) in Centos05? I'm not able to find one.
View 3 Replies View Relatedsimilar to this problem http://www.linuxquestions.org/questi...nstall-673571/ i cannot seem to get the wireless card to turn on. ive tried NTDISGTK and Ntdiswrapper to no avail. it recognizes that the hardware is there, but will not turn it on. in terminal i have tried to force start it, but from what i remember, it gives me an error about authentication (might be access not authentication) ill get back here when i boot ubuntu and take some screenshots, at the moment i's running XP and hating it.
View 4 Replies View RelatedI'm running a Source Dedicated Server on my Ubuntu laptop, and to connect to it via external IP from other computers in the network I need to enable loopback in my router.This was working fine, but then I disconnected my laptop for a few days, and when I came back the wireless stopped working on my Xbox. I reset the router to factory defaults, and then setup everything again. It was all working fine until I enabled loopback again and power cycled my router. Now every time I do that, the internet on Ubuntu stops working and the wireless on the Xbox stops working.
Edit: You can ignore this I guess. It seems I was actually DISABLING loopback by enabling that router option, which I guess caused this. Strange, because the first time enabling this option was the only way to get my external ip to work. Oh well, everything is fine now.
I have a bluetooth-enabled notebook and I used to eventually turn on/off the wireless switch, which disabled wi-fi and bluetooth capabilities.Recently I turned on the switch to find the bluetooth icon missing from the Notifications area at the panel. When I type bluetooth-properties at the terminal a windows pops up saying "Your computer does not have any Bluetooth adapters plugged in." No further hardware/software changes were made recently.
View 1 Replies View RelatedI am on a DELL Latitude 6500 laptop. It has a physical button to enable wifi. On Kubuntu 10.10 it was working perfectly. Now that I have made a fresh install to 11.04, whenever I try and turn the wifi on, I get a status message that my wifi is enabled. But the led indicator does not glow. and I could not find my router nor any other routers in my building. The following is some of the that might be useful to debug.
According to this website [url] the wifi is compatible with ubuntu and does not need any external drivers I guess.
I have installed ubuntu 9.10 on my laptop. It has a 802.11n wireless card.
When I boot up to ubuntu, the wireless does not work. And if I connect to a wire network within ubuntu, it works.
Ubuntu can't detect any of the Wifi network in my home (other laptop can). And I click 'Enable Wireless' in the notification area, it said 'Device not found' for the Wireless Network.
The card is 'Intel Wireless-N Card with Bluetooth'
Can you please tell me how can I setup my wireless card in ubuntu 9.10?
Where can I find a driver for this pc wireless card? And how do I install it?
View 1 Replies View Relatedi came across BT4 last few weeks ago, and i tried it in vmware and was tempted to know more, so now i wanna try to install it and dual boot. Here's my problem, when installing the install.sh i get 2 options instead of 3 options in the partioner, so i couldnt install BT4 without erasing my W7, also if i do successfully install it, how do i install drivers for my wireless card, ohh and my laptop is a Acer Aspire 4736G, my wireless card is a intel(R) WiFi Link 5100AGN...
View 2 Replies View RelatedI am using RHEL5 - kernel version is 2.6.18-8.el5 and I want to purches a wireless lan card.
View 1 Replies View RelatedI am trying openSUSE after a long break from Linux, but I am running into the original issue I ran into several years ago which made me decide not to use this distro. My LAN card is working fine, and I can get internet hardwired into my router, but I am not having any luck getting my wireless card recognized or working. Also, my notification area on my taskbar (sorry for the Windows terms) is not showing any sort of network status icon.
I have gone Computer>Install Software> and installed the b43 fwcutter thing from the repos, and have also run the following command in terminal:
sudo /usr/sbin/install_bcm43xx_firmware
In Network Settings in YaST, my NIC is showing, but I am still not seeing my Wireless card.