Fedora :: "trying To Unpack Rootfs Image As Initramfs" Fail To Load Install Cd?
May 15, 2010
I've had a hell of a time with an extremely unpredictable recently built computer. I don't even know where to start with thetory, so I'll try to share some key facts.Running Fc12It is a Gigabyte GA-EP45T-UD3LR. Reviews on NewEgg havee complaints about instability and it's lack of claimed DDR3 support. I had to use setting described by another reviewer to underclock my memory to get it to work. It has since passed memtest many times.I've encountered mutliple occasions of a complete system freeze.
Booting after freeze seems to require a random amount of restarts to get it to come up. Sometimes I have to hit the reset button 30+ times until I can get the log in prompt to come up.Right now, I have one SATA HDD, in IDE compatibility mode in the system. dropped the FC12 Stable dvd in, the very DVD I installed the current system with, to install it again on another partition. I get to the same point every time, where it hangs:"trying to unpack rootfs image as initramfs"Googling that didn't help me much, since it mostly seemed to address people messing with their own kernel builds.
If I choose "boot from local drive" on the options list from the install DVD, it goes to "PRESS ANY KEY TO REBOOT" with a blinking underscore cursor. Where when I boot normally, it will either give me JUST the blinking underscore alone, or the FC loading screen with no progress. I suspect this motherboard is a pile of **** and needs to be RMA'ed, or simply returned. Anyone care to support or reject that hypothesis?
View 3 Replies
ADVERTISEMENT
Jul 12, 2011
I have 2 Dell Inspirons 2200, I've installed F14 on in the past. Both laptops fail to initialize, I've verified media, and I'm able to boot the DVD on another system. The install fails at: Trying to unpack rootfs image as initramfs...
View 3 Replies
View Related
Oct 5, 2010
I am having problems booting a new Ubuntu 10 (server) install. My primary HD (/dev/sda) is laid out as follows:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 18 144553+ 83 Linux <-- /BOOT
/dev/sda2 19 182401 1464991447+ 5 Extended
[code]....
View 1 Replies
View Related
May 1, 2011
I have been using 11.04 for about a day, I go to boot up and it goes into busybox initramfs instead of booting into Ubuntu. The options to my boot in grub, and the errors I get when booting into initramfs are in the pictures attached to this post.
View 2 Replies
View Related
Sep 3, 2010
Uploaded with ImageShack.us
Here was I get on my screen.
I don't know why this is happened. But before I rebooted, I could not see any content on Windows like update or shut-down (if I tried to install something and it asked for confirmation, that window was blank. Or before I shut down, I had to push enter, since that windows was blank.)
I don't think I installed anything and computer was working just fine before.
I don't want to reinstall everything again.
View 5 Replies
View Related
Jan 1, 2010
So after a win7 wubi install, I updated through system update. Now after I choose ubuntu in the win bootloader it takes me to a grub screen. How can I boot into linux and remove grub? (This isn't my computer otherwise I would dual boot and let grub take care of it).
View 5 Replies
View Related
May 22, 2011
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
Dec 18, 2010
Trying to install iso disk image of vers 10.10. does not seem to want to load from boot. used alcohol 120 for burn,which is usually very reliable.But install seems to stall early into load.
View 4 Replies
View Related
Nov 24, 2010
I have just exported 3 png files out of gimp for a html document I'm working on right now, and they are all almost the same, except I need each to load when the user does something. So the first image will display on the page, and when a user puts their cursor over it, then it will load image 2. When they press it, it loads image 3.
View 1 Replies
View Related
Jun 27, 2011
Can anyone else confirm that Inkscape (from the FC15 distribution repo) is running as slow as a wet wig?
I have a fast machine (8 core 3.4ghz, 4GB RAM, 64bit FC15) everything else graphics wise is smooth and sexy but with inkscape try and zoom in with NO image loaded and it tic, tic, tic, jerky movements etc
Load an image and it is completely unusable, and has actually crashed my machine a couple of times when i was trying to work with a 5MB SVG file
View 14 Replies
View Related
Apr 25, 2011
I work for a small business that wants a semi-proprietary (branded) os, I've quickly assembled the needed os in susestudio, I now need to alter a lot of images, what's the best way to unpack and repack into a bootable iso?
View 1 Replies
View Related
Jun 20, 2011
I am trying some time now to get drobox going. After resolving problems with the repo-file it is now downloading fine then stops unpacking by 97 %. I tried using threads which tell that it is selinux which does not give permissions for the install. Trying to block selinux during the installation has not worked out. Is there a way to get it going it is something I do need every day?
View 2 Replies
View Related
Jun 19, 2010
I want to unpack tar.gz package. Where should I locate the package I want to unpack?
View 3 Replies
View Related
Mar 24, 2010
When trying to search for applications to install via 'Add/Remove Software', I get the following error:
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 391, in _do_search
for (pkg, inst) in res:
ValueError: too many values to unpack
View 3 Replies
View Related
May 9, 2010
I found a similar problem. The poster used a similar title "Administrative tools fail to open - karmic" I also have karmic and four tools fail to load; Ubuntu Software Center, Hardware Drivers, System Testing, and Update Manger. Synaptic and System Monitor run. I ran update-manager and software-manger and was told module pygtk does not exist. I ran "sudo apt-get install pygtk" and it said that did not exist as a package. The terminal update and upgrade also work.
Code:
me@me-laptop:~$ update-manager
Traceback (most recent call last):
File "/usr/bin/update-manager", line 26, in <module>
import pygtk
ImportError: No module named pygtk
me@me-laptop:~$ software-center
[Code]...
Would the best solution be to reinstall the OS from fresh downloads as at least the Hardware Drivers tool works with the live USB?
View 1 Replies
View Related
Apr 8, 2011
java ran just fine with 10.04 but when i upgrade to 10.10 it stopped working i can not get any of my java files to load, when i dub-click them my cpu spikes then nodda.
View 2 Replies
View Related
May 12, 2011
NVidia drivers fail to load ?
Code:
If I hit the option Restart X it boots and displays normally but I always get this while booting
View 1 Replies
View Related
Mar 21, 2010
I have a DNS server with 3 zonesone is dynamic with an associated reverse and one is static
Everything was fine until I added a single host in the staticzone then the server stopped resolving names in that zoneThe only way I could get it to work again was delete the whole zone and re enter the zone and hosts
View 5 Replies
View Related
Apr 10, 2010
I'm encountering a known problem with IPtables. I set up rules and apply them, restarting firewall, then I get this message:
Flushing firewall rules: [ OK ]
Setting chains to policy ACCEPT: raw nat mangle filter [ OK ]
Applying iptables firewall rules: [ OK ]
Loading iptables additional modules: ip_conntrack_ftp ip_conntrack_netbios_ns [FAILED]
View 4 Replies
View Related
Jun 30, 2011
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies
View Related
Apr 17, 2010
Laptop with Nvidia integrated GO 6100. Now stuck in low graphics mode.
Uninstall/reinstall ENVY. No joy.
"Hardware Drivers" reports that Nvidia drivers version 173 are activated at the moment, but not in use. Got the same report from the 185s. 'nvidia-xconfig' produced no results.
Not sure where to go from here. Please assist.
On a positive note, my onboard Broadcom wireless is working without ndiswrapper.
View 2 Replies
View Related
Mar 18, 2011
I have run into an issue with Fedora on my laptop that has me stumped. On this laptop I had partitioned the hard drive with Windows 7 (came with the PC), and initially Fedora 13. This setup worked fine for about four-five months, but recently Fedora will no longer boot. One day I attempted to load the OS and after GRUB get a screen that says "Error 28: Selected item cannot fit into memory." Windows continues to load fine however, and a memtest worked fine as well. When I attempted to run my Fedora 13 live-cd, I got the similar error "Error 28: Not enough memory to load this specified image."
Now, not having anything critical on the Unix partition, I decided to delete the Fedora partitions and start from scratch. I did so and the computer successfully loads a Fedora 14 live-cd albeit slowly (but still not the 13 one... I'm guessing the CD is just corrupted from scratches). Unfortunately, once I installed Fedora 14 on the empty space and tried running, I get my original error dealing with the item not fitting into memory. I'm out of ideas, and getting tired of the machine being Windows only.
The specs are as follows:
ASUS UL80VT Notebook
Intel U7300 1.3Ghz
4GB Ram
GRUB reports memory as:
607K lower / 14272 upper
View 5 Replies
View Related
Jan 2, 2011
I recently got a shiny new msi notebook and I decided I wanted to dual-boot Linux on it (with Windows 7 Home Premium 64-bit). I started with Ubuntu, when that failed (the GUI wouldn't install properly) I tried Mint. It worked fine, but for some reason, I hate Mint. I deleted the Mint partitions and attempted to claim back the free space in a new partition for Windows 7. For some unbeknownst reason, it failed. Since I didn't desparately need the hard drive space, I said "screw it" and went about my day.
After seeing a friend using Fedora, I figured "why not?" So I downloaded F14 and burned it to a disc and booted it. All went well so I tried installing it. The install process went normal until I reached this screen: I press "Next", and I get this: (Full text here) I start to think that anaconda has something to do with my hard drive partitions, so I open Logical Volume Manager.
Partition 1 is a recovery partition (12 GB).
Partition 2, I have no idea, but it's only .1 GB.
Partition 3 is the Windows 7 partition (172.29 GB).
Partition 4 is 113.20 GB.
Unpartitioned space is 113.20 GB.
I know this can't be right, because my hard drive is only 320 GB (and those GB aren't even "real" GB) and the partitions add up to 410.79 GB. I'm thinking that Partition 4 and Unpartitioned space are the same thing, and the existence of the Partition 4 record is the aftermath of the failure to reclaim the disk space for Windows. So how do I go about fixing this (getting rid of Partition 4 or finding a work-around)?
View 2 Replies
View Related
Oct 13, 2009
System Specs:
Toshiba A135-S2276 Laptop With Vista
ATI RADEON 200M 128MB
1.78Ghx Core Duo
2GB RAM
I am trying to Install Fedora 11 from a live install CD. I know it works because I tried it on another system. After the little Balloon that shows its loading completes the screen scrambles, later a mouse pointer appears then freezes shortly after. When I remove Quiet from Kernel Params. Lots of text then Samething.. Scrambled Screen the Freeze. I have tried adding the Following Parameters to the Kernel (nomodeset, xdriver=vesa, acpi=noirq, noapic). This sounds like a common problem with ATI based graphics and all answers seem to point the "nomodeset" and the "xdriver=vesa" but they dont seem to help.
View 4 Replies
View Related
Apr 19, 2010
I try to install Fedora 12 from CD.
The CD is booted fine, but when i press on "Install to Hard Drive" icon, its not starting installation.
in the /var/log/messages i can see the following: localhost dbus" Can't send audit system: USER_AVC avc: received setenforce notice (enforcing=1).....
I use Dell latitude 110L.
View 1 Replies
View Related
Sep 2, 2010
I have a Asus UL80j, Nvidia GeForce 310m w/ 1gb mem, i3 core processor and 4 gb ram. Windows 7 HP came on, I love Fedora so I dual boot. I installed the Fedora 13, did yum update all is good. I attempt to use the compiz for cool effects however, it freezes my system.
I attempt to install the nvidia graphics driver from thread [url] and follow the instructions to perform the install and reboot.
First it loads the fedora logo like always and then boom, black screen with a blinking white underscore mocking me. Reboot once more and get the load out of pass/fails and see nvidia.ko for kernel...... [NOT FOUND] blah blah [FAIL] blah blah [FAIL]
View 3 Replies
View Related
Mar 26, 2011
I am doing something wrong. Just connected Fedora 14 to the internet. I wanted to do a speed test and this requires flash. I have download the linux (yum) version and tried to install adobe-release-i386-1.0-1.noarch.rpm no idea what is needed to be done next.
View 8 Replies
View Related
Mar 15, 2011
I've been reading various tutorials of the boot process but still am not clear. I don't care about grub stage 1 and 1.5 at the starting point of when the root filesystem is loaded into VFS(Virtualfilesystem), who is loading it, and from that point on. 1) Does grub load the root filesystem(read only) into VFS?2) Does the kernel load the root filesystem(read only) into VFS?3) Does INIT load the root filesystem(read only) into VFS?after this is concluded....Does INIT or the Kernel create the real root filesystem(rw)...right before the pivot.root
View 4 Replies
View Related
Apr 25, 2010
I try to mount initramfs-kernel-ver from boot directory.mount -t ramfs initramfs-kernel-ver /mnt/testbut i can't see any files.
View 1 Replies
View Related