I have 2 Dell Inspirons 2200, I've installed F14 on in the past. Both laptops fail to initialize, I've verified media, and I'm able to boot the DVD on another system. The install fails at: Trying to unpack rootfs image as initramfs...
View 3 RepliesI've had a hell of a time with an extremely unpredictable recently built computer. I don't even know where to start with thetory, so I'll try to share some key facts.Running Fc12It is a Gigabyte GA-EP45T-UD3LR. Reviews on NewEgg havee complaints about instability and it's lack of claimed DDR3 support. I had to use setting described by another reviewer to underclock my memory to get it to work. It has since passed memtest many times.I've encountered mutliple occasions of a complete system freeze.
Booting after freeze seems to require a random amount of restarts to get it to come up. Sometimes I have to hit the reset button 30+ times until I can get the log in prompt to come up.Right now, I have one SATA HDD, in IDE compatibility mode in the system. dropped the FC12 Stable dvd in, the very DVD I installed the current system with, to install it again on another partition. I get to the same point every time, where it hangs:"trying to unpack rootfs image as initramfs"Googling that didn't help me much, since it mostly seemed to address people messing with their own kernel builds.
If I choose "boot from local drive" on the options list from the install DVD, it goes to "PRESS ANY KEY TO REBOOT" with a blinking underscore cursor. Where when I boot normally, it will either give me JUST the blinking underscore alone, or the FC loading screen with no progress. I suspect this motherboard is a pile of **** and needs to be RMA'ed, or simply returned. Anyone care to support or reject that hypothesis?
I have recently bought a Dell Inspiron N5010 Laptop....and I am facing a lot of problems as most of the hardware seems to have no driver installed.... I am a not an expert, so the problems seem overwhelming to me. I have looked around for solutions on the Internet...but there seems to be no collective solution to my problem. The information regarding the problems I can provide is as follows.....
[Code].....
I have a dell inspiron 530 desktop with core 2 quad and 4GB memory, running 32bit vista and 64 bit fedora 10. I searched on the web with "can I install 8GB memory on dell inspiron 530", and got couple of articles that says I only needed a bios upgrade.I downloaded bios version 1.0.18 from dell and run that in Windows to replace bios 1.0.12.After it said upgrade successful and asked me whether I wanted to reboot to have the new bios taking effect, and I said yes. And it shutdown the computer, and never came up Now, when power up, I see nothing, not even the "F2 to setup, F12 to boot menu" message, much less the grub selection. Is there a way to revive the computer?
View 4 Replies View RelatedNow, all of a sudden, after I restarted after a system update, My dell desktop inspiron hangs on boot. The kernel is: 2.6.34.8-68.fc13.i686. Not only that, but the system won't boot for any of the remaining previous kernels.
View 6 Replies View Relatedjust installed ubuntu on a dell inspiron 6400 but the wireless doesnt work.
However, it works 100% when running from the live cd.
Can i install/copy the driver from livecd to hard drive, or is there another soultion for this?
I am having problems booting a new Ubuntu 10 (server) install. My primary HD (/dev/sda) is laid out as follows:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 18 144553+ 83 Linux <-- /BOOT
/dev/sda2 19 182401 1464991447+ 5 Extended
[code]....
I recently purchased a dell inspiron N4010 with windows 7 preloaded...i want to install fedora into it and i want keep it as my primary operasting system.... but what worries me is that the windows setup files is stored in a hidden recovery partion.... So if i install fedora will i lose this ??? if no will i will be able to install windows from that partion?
View 8 Replies View Relatedi just installed version 11.04 on a dell inspiron 8100 the install went perfect up to the point where it asks me to restart. once i restarted i can not see the desktop.
dell inspiron 8100 20GB HDD, 512MB RAM, Pentium III.
I have a Dell PowerEdge 300 SC that won't boot to the Fedora ISO image burned to the CD. I unpacked the .iso and the CD has the boot, isolinux and LiveOS folders visible. In the BIOS, I put the CD driver ahead of the hard drive in the boot sequence. It just doesn't see it. Is my hardware simply obsolete?
View 12 Replies View RelatedI have a old Dell Inspiron Laptop I would like to use, but it dosent have awhole lot of memory 160megs worth and tried running the live cd of Ubuntu and Lubuntu and all i get on the screen is a blinking cursor. It give me the option to boot off the cd but that is where it stops.
View 3 Replies View RelatedI am trying to install ubuntu 9.10 to Dell Inspiron 14". It got stuck after first step. Configuration of my laptop is as follow intel core i3 processor, 4GB DDR3 RAMm (does it support for above config.?) i am having windows 7 ultimate as an operating System right now and i am new at ubuntu
View 3 Replies View RelatedI am trying to install Ubuntu 10.04 on a dell Inspiron laptop. When I choose the install option in the boot menu it loads my to a log in screen. but Ubuntu has never been installed in my laptop.
View 5 Replies View RelatedI have been using UBUNTU 8.04 with my Dell Mini Inspiron. How can I upgrade it ? If I upgrade is there problem after upgrade ?
View 5 Replies View RelatedI am attempting to load 10.10-i386 on a Dell Inspiron. I have created my boot CD and all works fine with the install manager until it gets to the "Who are you?" page. It will not let me advance past this page. I am a complete rookie on Ubuntu and Linux OS.
View 5 Replies View Relatedi have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
View 13 Replies View RelatedThis card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
I used wubi to install 9.10 on my dell inspiron 1525. I had a problem with not being able to get wireless working, and found out that I had to activate the Broadcom STA driver which lead to a crash. Now I've rebooted, everytime I try to install I get 'SystemError() InstallArchives' or the authenticate box hangs. Is there another way to install these drivers?
View 1 Replies View RelatedI have got Windows XP Pro installed in my Laptop. It had 2 partitions. In C drive i have got Windows XP.Installed UBUNTU in E Drive. It did partiion E drive futher to install it. Had the GRUB RESCUE prompt initially. But after running the following got into the next problem.
Grub reinstall fix:
Boot Ubuntu live CD. Then run
sudo mount /dev/sdf5 /mnt
[code]....
i can use internet in my Laptop. My laptop is only connected with wireless. No cable connection avilable here. Wireless is functioning well in windows 7 but in openSuSe 11.2 it is not functioning. I've searched on this issue in net and found that i've to install Packman repository or install driver from broadcom website. Please help me by giving easy way to do so. Following is the detail of my wireless device and some other information.
Code:
linux-gkpt:~ # lspci -v
0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
Subsystem: Dell Wireless 1390 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at efdfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
[Code]...
I have an old dell inspiron 700 that I want to turn into a home file server. I have installed ubuntu 7.10 and after a huge amount of google work got all my hardware in line. Then I realised that I should have installed 10.10 So I downloaded and burnt the new ISO and tried to install it. The install does not recognize my Xircom RealPort Ethernet card but that is okay, 7.10 didn't either and I got it working post install. But 10.10 can't detect the pci hard drive. I have tried various things but since I am not that familiar with linux I am just stabbing in the dark.
What bios settings should I be aiming for? What boot options should I set and how? Why are the russians being such kill joys over the discovery of fossilized meteorites?
I am using Ubuntu right now. But I wanted to install Fedora 12 on my Dell inspiron 1545 laptop. My questions are can I use a live cd if available for fedora 12 and then install it on my laptop like we can do for ubuntu. Are all the drivers available automatically installed during installation.
The problem I faced my last installation with fedora 11 was that I could not get the wireless installed and I was unsuccessful in installing the wireless drivers using ndis wrapper or b43-legacy or something.
Can you give me a detailed link which could allow me to install the wireless drivers and also the video drivers for my laptop. The problem I am facing with my ubuntu 10.04 is that it is slow, the flash plugin is worst i guess, some of the flash videos are very slow.
Taking all of these into account can someone suggest me a good operating system. I am pretty much interested in learning linux rather than just using it like a windows operating system. I am considering, fedora 12, suse 11.2, linuxmint, centos, mandriva. Which one could be a best possible for my installation.
As I am not willing to purchase a dvd for these linux flavors can I use my flashdrive to install.
I installed REL 5.5 on this Dell laptop (originally win 7) and everything works ok except when i get to the login GUI the LCD brightness (or lack of) sets to it's lowest so i have to click the f5 button to brighten the screen. If I log out, the LCD resets to the dimmest setting (can hardly make out the login GUI) and again I have to click on f5. I believe I need to update the BIOS but I don't know how. The BIOS update I dound on-line if a xxx.exe file.
View 1 Replies View RelatedA friend of mine, who doesnt understand computers at all, had a virus on her Dell Inspiron 6000 (2-GHz Pentium M processor, 1GB of DDR400 DRAM) laptop. She was unable to boot it up.
So i advised her to boot up Ubuntu 10.10 netbook edition. I was instructing her over emesene, so it was quite difficult at times, however, she complained that when she loaded up and went through all the instructions as per the netbook "how to", she only got a purple screen.
After a while, we managed to get her to the actual ubuntu screen, however the icons down the left hand side were all missing. I have a feeling this is something to do with the Graphics Processor: integrated Intel GMA 900 graphics, or ATI Mobility Radeon X300.
I asked her to try and get online but she couldnt so i asked her to find the drivers for her network card and she couldn't find them.
I then asked her to update drivers but they wouldnt update and no drivers were found.
I really want her to get up and running with ubuntu and convert her, but its really frustrating, not getting her online and up and running. But she wants to load XP professional.
I recently migrated from ubuntu 10.10 to xubuntu 10.10 on my Dell inspiron 1100. After many tries I "succeed" (with internet) in solving partially the issue related to the video chipset (Intel 82845G Graphics) by using a "vesa" driver in the xorg.conf. Some discussion here mentioned the possibility of deleting ASCI 8086:2562 from a blacklist in usr/bin/compiz but even with ghex editor I could not find any matching string. Hereafter my grub and xorg.conf for those who are interested. I have another issue now. How can I create an iso file of my installed xubuntu. I did download ubuntu 10.10 and created a CD but I migrated after to xubuntu (since most of the files were there) and it would be great to burn a CD of xubuntu.
[Code]...
if i press the function key(FN) and F2 wireless disables but it wont renable if i press the button combo again.the only way so far i have managed to reenable wireless was to reboot.
View 1 Replies View RelatedInstalled fedora 13 to hard drive on fresh partition,installed ok,ran updater,installed all updates.all working ok but fedora is not able to detect my laptop monitor.i am unable to increase resolution.stuck on 800 * 600. when a window in open and i need to click at the bottom of the window i cant because it is bellow the screen.I went to [URL] to look for drivers.it only shows display drivers for red hat 7.0.i tried them but wont install.is thier drivers i can use for fedora 13,or a way to force resolution into 1024*768.
View 1 Replies View RelatedSince the install and original tweaking of F15 the os and pc have been operating flawlessly now for a couple months. Today I slid the Sandisk memory card from my camera in but there is no detection of the stick and no paths in the media link directory. I searched the forum but did not find any post specific to this issue.
View 1 Replies View RelatedI have ubuntu 10.04 netbook edition on my usb. But, when I go to install it, by restarting and then clicking F12 (is F12 the right one?) and the menu comes up. So i select boot with removable disk, but then it just resumes to boot as windows as it normally does. I need to get this menu right so I can install Ubuntu...My computer is a Dell inspiron mini 10 (1012).
View 3 Replies View RelatedI have install 64bit version of Fedora 12 on a new Dell Inspiron 1545 with a Dell 1397 wireless card. It actually uses a Broadcom BCM4312 chip.
I have install the following rpms:
Code:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
kmod-wl-2.6.31.9-174.fc12.x86_64-5.10.91.9.3-3.fc12.11.x86_64
kmod-wl-5.10.91.9.3-3.fc12.11.x86_64
code....
what I do not understand is the state of the card as unavailable. how I can activate this card?