System Specs:
Toshiba A135-S2276 Laptop With Vista
ATI RADEON 200M 128MB
1.78Ghx Core Duo
2GB RAM
I am trying to Install Fedora 11 from a live install CD. I know it works because I tried it on another system. After the little Balloon that shows its loading completes the screen scrambles, later a mouse pointer appears then freezes shortly after. When I remove Quiet from Kernel Params. Lots of text then Samething.. Scrambled Screen the Freeze. I have tried adding the Following Parameters to the Kernel (nomodeset, xdriver=vesa, acpi=noirq, noapic). This sounds like a common problem with ATI based graphics and all answers seem to point the "nomodeset" and the "xdriver=vesa" but they dont seem to help.
I have a Asus UL80j, Nvidia GeForce 310m w/ 1gb mem, i3 core processor and 4 gb ram. Windows 7 HP came on, I love Fedora so I dual boot. I installed the Fedora 13, did yum update all is good. I attempt to use the compiz for cool effects however, it freezes my system.
I attempt to install the nvidia graphics driver from thread [url] and follow the instructions to perform the install and reboot.
First it loads the fedora logo like always and then boom, black screen with a blinking white underscore mocking me. Reboot once more and get the load out of pass/fails and see nvidia.ko for kernel...... [NOT FOUND] blah blah [FAIL] blah blah [FAIL]
I think I am experiencing the same problem as a lot of people with the Nvidia graphics driver. I have tried to use the guide here, mjm, RPM Fusion and the nvidia website. Each lists my card as being supported but each time the install fails and I have to Alt - Kitaral - f2 to get to the command line log in.
I installed a new graphics card (Nvidia GeForce GT240 1 Gb, 128bit DDR3) on my gigabyte VA900M motherboard, with my computer running a dual boot of windows 7 (64 bit) and ubuntu 9.10 (64 bit). The computer would not boot past the memory test stage. To solve this, i flashed the BIOS with the latest upgrade for the motherboard from the Gigabyte website. This still did not work, so, doing the usual "testing hardware combinations by unplugging and replugging", I removed 1 Gb of RAM, which solved the problem of booting past memory test (a case of too much memory?)
Problem: The problem now is, GRUB wont boot from the HD, unless I have the Windows 7 disk (or Ubuntu Live) in the DVD drive. If i dont press a key to boot from the disk, Grub will then load. how to make GRUB boot from the HD? Do I need to redirect/reinstall GRUB? Im pretty sure it is not a BIOS problem.
I've lost my boot manager ,can't boot from harddisk ! I've installed F11 x86_64 kde livecd on a partition aside with FC10 and windows xp, created a /boot ext3 partition + a " / " ext4 root partition and a swap partition shared with F10.I've tried to restore booting windows xp with the windoze restore cd with the "fixmbr" tool, but it did'nt fix i
I've been trying to install fedora 12 on my laptop, however, I've been running into kernel panics on both the live cd and the install dvd. I'm using an HP HDX16 with an Intel Core Two Duo T9400 @ 2.53ghz, and a Nvidia Geforce 9600M GT. Dunno if any other hardware might be involved. Here's the text I get on my screen:
Code: NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR; Host address width 36 DMAR: DRHD base: 0x0000000000000000 flags: 0x1 IOMMU 0: ver 0:6 cap f00021a4f000e2c3 ecap f000ff54f000ff53 DMAR:RMRR base: 0x89dc9ff649ff77fd end: 0xf4ffdefe05fcfbffe DMAR: No ATSR found DRHD: handling fault status reg f0002198 Kernel panic - not syncing: DMAR hardware is malfunctioning
I have finally decided to bite the bullet and upgrade my current Linux system from Fedora Core 2 to Fedora 15. When checking the download page and from reading another thread there is apparently no isos' available for an set of install CDs. An iso is only available for DVD. Since my machine does not have a DVD drive that is obviously not an option. In the past I have only installed from a set CDs and I'm not sure which install method is the best to use. I do have a DSL internet connection and will probably need to increase my partitions sizes. Which install method do you recommend and why?
I recently got a shiny new msi notebook and I decided I wanted to dual-boot Linux on it (with Windows 7 Home Premium 64-bit). I started with Ubuntu, when that failed (the GUI wouldn't install properly) I tried Mint. It worked fine, but for some reason, I hate Mint. I deleted the Mint partitions and attempted to claim back the free space in a new partition for Windows 7. For some unbeknownst reason, it failed. Since I didn't desparately need the hard drive space, I said "screw it" and went about my day.
After seeing a friend using Fedora, I figured "why not?" So I downloaded F14 and burned it to a disc and booted it. All went well so I tried installing it. The install process went normal until I reached this screen: I press "Next", and I get this: (Full text here) I start to think that anaconda has something to do with my hard drive partitions, so I open Logical Volume Manager.
Partition 1 is a recovery partition (12 GB). Partition 2, I have no idea, but it's only .1 GB. Partition 3 is the Windows 7 partition (172.29 GB). Partition 4 is 113.20 GB. Unpartitioned space is 113.20 GB.
I know this can't be right, because my hard drive is only 320 GB (and those GB aren't even "real" GB) and the partitions add up to 410.79 GB. I'm thinking that Partition 4 and Unpartitioned space are the same thing, and the existence of the Partition 4 record is the aftermath of the failure to reclaim the disk space for Windows. So how do I go about fixing this (getting rid of Partition 4 or finding a work-around)?
I want to view movies and livestream on the Internet and I tried many times installing the flash player for my fedora liveCD but still its not working. There always been an error. I been using all the options and installation instruction posted on the adobe site but still I can't find my way in.
I upgraded to 10.04 and cannot boot my system, even in recovery mode. No errors are shown, only some random color noise at the top of screen. I tried the 10.04 livecd and it doesnt boot eiter, it stops in busybox prompt with error: "Could not mount /dev/loop1 on /cow" or something like that. Before 9.10 was functioning perfectly.
When attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.
I'm quite keen to get Fedora 15 up and running but I am falling at the first hurdle. I can successfully boot from a LiveUSB and be presented with a text only tty2 / tty3 / tty4 / tty5 interface inviting me to log in but no graphics are possible and I cannot see any way to install Fedora. I have GMA500/Poulsbo graphics chipset which has notoriously **** Linux support but I note that basic support has been inlined in 2.6.39 so I think that if I could only get Fedora installed and then upgrade the kernel or do other things later I will be ok.
I was having trouble getting X.Org to work with the video card in a recently acquired laptop, so I decided to try to probe around the configuration of a Linux Live CD to figure out how to set up my kernel. I chose the Sabayon 5.0 Live DVD because it was the only one that I could find that was the same or newer than the 2.6.32 kernel I have installed on the laptop right now. Of course, the DVD booted right into GNOME without issue, unlike the hangs and crashes that I had been getting. So, I want to figure out what kernel driver this Live DVD is currently using, but I don't know how to. hwinfo doesn't shed any light on the matter, and lspci -vnn doesn't list a driver for my video device, though both methods correctly identify that I have an Intel 855GM video processor. How can I find out this information?
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
NB I have a HP Compaq 4530s with i3 and I want to install linuxx , but when booting Live CD jumped out such an error as in the accompanying drawings. I have tried to change the boot and nothing is set
I want to create a live CD that runs from my USB flash drive.How can I do this in Ubuntu. I am running Karmic 64bit.I found the programs:Universal USB InstallerLive Linux USBHowever these are both Windows based programs.Is there anything out there that will work in Linux that will do the same thing?
If I run Ubuntu 10.4 LIVE from CD everything works fine. However, when I try to install, it hangs up at about 23% (while installing Firefox). I thought my HD had a problem, but the same happened after checking it had no bad sectors and even after replacing it. Same as above using a CD of version 8.4 ( live works, install doesn't complete). Same trying the Alternate in place of the Desktop edition. With the same CD's I already installed successfully on other machines. Booting from USB SHOULD be possible ( according to BIOS settings ) but apparently it doesn't work.
Present machine characteristics : AMD Athlon 2200+ 1.8 Ghz 512 MB RAM HD EIDE 40 GB (Master of the Primary channel) BIOS AMI dated 13-05-2003 Motherboard : no brand Two EIDE CD drives (as Master and Slave of the Secondary channel).
I have Fedora 14 installed on my laptop (Installed with few issues) and I'm trying to install ubuntu on my desktop. I had ubuntu 10.04 installed before on a second (250gb) hard drive (Windows 7 on the other 1TB drive) with a few issues and kinda screwed a few things up trying to upgrade to 10.10. So, I said screw it, and downloaded the live .iso for 10.10 (x64) and burned it to disk. I boot from the live CD and choose the install option to use entire 250Gb disk. I choose my options, including to download updates and install 3rd party software and let the install run its course. Everything seems to be going fine and it asks me to restart. So I say yes, the disk pops out and the screen goes dark... and then nothing happens. The computer's still on but hasn't restarted yet. I hit the del key (Which I use to enter BIOS) and the computer finally restarts. I enter BIOS and tell it to boot from the 250Gb HDD, save and exit. However, it gets stuck at the point where it (It, I assume to be the motherboard) says "Loading Operations System ..." and with a blinking cursor on the line underneath. Nothing happeneds.
I tried again just this morning using the same procedure. I'm once again stuck at the "Loading Operating System .." screen.
EDIT: After poking around a bit more, I remembered I was confronted by a GRUB menu when I booted into Windows 7 HDD. So, I selected Linux from the menu and all seems good. Does anyone know why this is? It's very odd, well at least to me. Why would GRUB be on the windows hard drive? Is this something I should be concerned about?
I've just downloaded ubuntu server 10.04.1 and put it on my usb flashdisk, the installation works fine until the point, where it tries to install grub.The thing is, that the installer is trying to write the grub to /dev/sda (which is my usb flashdisk) and not the raid itself.I'm using a fakeraid intel ich9r, which maps the newly created storage to /dev/mapper/isw_ecdhgaacgh_Volume0.Why doesn't install use that instead? It sees it, partitions it, even copies files to.
I just bought a new Dell Latitude E6510. When I boot from the Ubuntu 10.10 64bit disk (I've checked the disk for errors already), the initial, purple splash screen comes up, but then the screen just goes blank and stays that way. I never even see a grub screen.I tried Linux Mint 9 with both the 64 bit DVD and the 32 bit CD. Both Mint disks bring up a grub boot screen, but then the screen goes blank just like Ubuntu 10.10. I can hear Mint's "login" sound, but nothing shows up on the screen
No Bootup just a Black Screen with a frozen cursor after install, but LIVE CD works in 1024x768 mode? Well, I have a Sony Bravia 32xTV with HDMI input coming out of a ZOTAC nvidia type of card. The live CD will recognize the HDMI graphics card and Sony TV/monitor and thus works like Ubuntu normally does. But when I go to install to a hard drive and try to boot up I get just a Black Screen with a frozen cursor. I even have another Ubuntu 8.04 version running on the Sony Bravia TV , so no problem with TV end of things. what do I do now, oh great Ubuntu gurus out there in cyberland? what could I possibly do , what do I read, where do I go , what, where, who, how, when ,which way?
I am using Dell Notebook model Inspiron 1420. I run Ubuntu 9.04. I've tried but failed to install SPSS Student Version 16 via Wine. There is a message saying the installer is unable to run in graphical mode. Try to running installer with the -console or -silent flag. What is the silent flag?
I've burned the installation media on several different types of media, and i'm getting an error after the 3 bars load (first screen). I've tried the verify and boot option, and it's fine. I'm trying Fedora 10 on a studio xps 1340. The error messageet isCE hpet increasing min_delta_ns to xxxxx nsec twice, thenForce XPAon: 0about 15 times, thenCE hpet increasing min_delta_ns to xxxxx nsec a few more times, this pattern alternates and the xxxxx keeps increasing, starting at something like 10000 and jumping by 50000 each time it reposts.
I was trying to fix gparted (it was crashing whenever it started) and then when I would type my password in the login screen, the screen would flash back and then the login screen would come back. If I logged in in a terminal and then did startx, it would just show a black screen. I figured it was broken. I made an Ubuntu 10.10 liveCD and booted it up and clicked on the installer thing and then it froze and an error thing popped up saying Parted crashed.
Essentially what I need to do is install Ubuntu without using the partition GUI.Can I try to find a thing that will let me make an empty EXT4 partition and then a thing to let me install Ubuntu to it?
I am installing from the scratch a 11.3 on a PC on which previously 11.1 did run flawlessly. (Athlon 3700 with 3GB ram and Asrock socket 939 mainboard. Graphics is Nvidia. The installation comes every time up to 90% when it arrives at "font initialization). No error message is displayed. The little "cursor wheel" is still turning but else, there is no activity.
DVD from an sha1 checked and MD5 doublechecked download was burned with lowest speed in K3b and verified by the same program post burn, with full success of every verification. Tried to change DVD reader but does not change the result. Runs speedy up to that step.
I've bougt a new pc (i5-2050k, Nvidia GeForce 560Ti) and wanted to install Linux beside Windows.But each Linux-distribution (exept the old ones from Mandriva) fails installing/starting als livecd/checking for installation errors/..... while initiating udev.Is there any known bugfix for this problem? Remind, there is just Windows, so don't give me any shellcode to execute
My first upgrade attempt to 9.10 ruined my install - there was no return and as 9.10 would not install either, I reinstalled 9.04 and everything was as expected.I decided to wait for 10.04 hoping the issue had been solved - unluckily it has NOT. Neither Live CD 9.10 nor 10.04 work. New Mint does not work either - to closely related to Ubuntu, but Suse live CD does. Played around with findings from different threads - like taking out "quiet splash --" and adding modprob parameter to no avail Prime suspect is HD and HD controller (ATA/PATA) - but I could not nail it.
