Trying to install iso disk image of vers 10.10. does not seem to want to load from boot. used alcohol 120 for burn,which is usually very reliable.But install seems to stall early into load.
View 4 RepliesI tried installing Ubuntu 10.04 WS on my PC but it did not see any disks to install on. I believe this is because my drives are all configured as RAID. My mobo is an Asus M3A78-EMH HDMI AM2+ socket with an Athlon 2X 5000+ CPU. The chipset is AMD 780G. I have the BIOS configured for RAID drives and I already run Win XP x32 and Win 7 x64 on it. My boot drive is configured as 'RAID READY' and I have 2 RAID 1 disks consisting of pairs of SATA drives.
From what I have researched it seems that with some tuning it should be possible to install Ubuntu 10.04 but I have little Linux experience and don't want to mess up my existing drives. I have installed Linux before a few times and run it but never with RAID. Is anyone aware of an existing disk image that I will be able to install from on my system or would it be possible for someone to create one for me to use?
Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies View RelatedHow do l install and enable the australian spell checker in libreoffice vers 3.3.0. ? I can't get the automatic spellcheck to turn on. Misspelled words are not underlined with the typical red squiggly line.
version installed
# rpm -qa | grep libreoffice| sort
libreoffice-3.3.0.3-2.1.x86_64
libreoffice-base-3.3.0.3-2.1.x86_64
libreoffice-base-drivers-mysql-3.3.0.3-2.1.x86_64
libreoffice-base-extensions-3.3.0.3-2.1.x86_64
[Code]...
I have a Windows XP pc that has become corrupted and I have a image of the drive that I want to restore, however Drive Image won't allow me to restore to the main system drive. I was wondering if it is possible to use the Live CD and then do the restore through Ubuntu. I know it's probably a long shot but thought I'd ask anyway.
View 2 Replies View RelatedI have a virtual disk image. Is it possible to boot the computer from it, instead of having to use virtualbox?
View 2 Replies View RelatedI want diskboot.img for fedora 12. How to get it.
View 1 Replies View RelatedHow to boot an iso image from hard disk. I have created a linux live cd with remastersys. I want to test it. So I want to boot it from my hard disk.
View 3 Replies View RelatedHow do I create/boot a ram image from a disk? I'd like to create a linux installation that is booted from a USB or CF drive and after boot does not access the disk.
View 4 Replies View RelatedIs it possible to boot from a disk image file(containing linux) file that resides inside windows and add a bootloader entry for booting from the disk image.?
View 2 Replies View RelatedI wanna know how to boot a xen from grub2 ? and is there a way to boot a domU also from the grub (if it is installed in a disk image ex :- disk.img)
View 1 Replies View RelatedI have a dvd I want to boot from, on a certain laptop. The problem is this:
DVD will NOT boot in laptop [1] with this DVD.
DVD WILL boot ok in laptop [2] with this DVD.
- Conclusion, DVD is ok.
* laptop [1] and laptop [2] boots other media in the cd/dvd drive ok.
I can see all files on DVD in both laptops. As a workaround I copied the DVD image off the DVD drive to internal hard disk with following command and the result was as follows:
- result of dd command
# dd if=/dev/sr0 of=/dev/sda4
6298816+0 records in
6298816+0 records out
3224993792 bytes (3.2 GB) copied, 473.18 s, 6.8 MB/s
How do I make that partition [/dev/sda4] bootable ?
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
I have just exported 3 png files out of gimp for a html document I'm working on right now, and they are all almost the same, except I need each to load when the user does something. So the first image will display on the page, and when a user puts their cursor over it, then it will load image 2. When they press it, it loads image 3.
View 1 Replies View RelatedAnybody else get errors about the 11.2 disk image being bad? All the linux and windows software I use say it's not in the "proper" format. I also straight burned it as a bootable disk and it still doesn't work.
View 8 Replies View RelatedI'm looking for some help on this issue. I have an image (Windows XP) made with CloneZilla of a 160Gb disk (used space = 11Gb) and I 'need' to restore that image to a smaller disk (120Gb). In order to try everything out I created a virtual machine in VMWare. I've tried about every option available in CloneZilla without succes. The latest thing I tried was using dd to just copy over the partition to a created partition on the smaller disk but when booting I got:
Code:Booting...Error loading operating system.Then I thought installing the image to a disk with the same size, resize the partition with GParted and make a new CloneZilla image, but for some odd reason (typical to Windows) when booting I get a BSOD, impossible to read. The BSOD happens when booting from the disk with the same size, before resizing the partition. This also is a virtual machine.Can anyone point out what I'm missing? Or, if anyone has succesfully done this, how did you go about it?
I'm trying to install debian-6.0.2.1 from hard diskand it can't find my iso image wich is on the slackware partition.i downloaded initrd.gz an vmlinuz,added some lines to lilo.conf so that i can boot but then when it searches for the iso image doesn't find it .
View 6 Replies View RelatedI'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
View 2 Replies View RelatedSimple question, which implies lot of complexity, unfortunately : how to install Clonezilla and mount multi-partitions cloned image disk under DEBIAN ?
Wishing that one day Linux would be so easy and complete as Windows. But we are gaining more users, so Linux will have more apps
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies View RelatedAfter installing Windows 7 I didn't know how to restore GRUB and I installed a new Ubuntu 10.4, so that now the former installation is in 6th position on the booting screen.I tried to edit the "menu.lst" but, now in Grub 1.9 I can't find the "menu.lst"
View 2 Replies View RelatedI need little help on live disk creation and disk image backup.
Can I create live disk using my hard drive installation? If yes then, can I restore the fedora from the live disk to the hard drive. I mean to say that from that live disk can I install fedora again in my hard drive.
Second question is, if I create the disk image of my hard drive( including ntfs & FAT32 partition) , can I restore it in a blank drive. If so , then can os will be restored also?
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies View RelatedI've had a hell of a time with an extremely unpredictable recently built computer. I don't even know where to start with thetory, so I'll try to share some key facts.Running Fc12It is a Gigabyte GA-EP45T-UD3LR. Reviews on NewEgg havee complaints about instability and it's lack of claimed DDR3 support. I had to use setting described by another reviewer to underclock my memory to get it to work. It has since passed memtest many times.I've encountered mutliple occasions of a complete system freeze.
Booting after freeze seems to require a random amount of restarts to get it to come up. Sometimes I have to hit the reset button 30+ times until I can get the log in prompt to come up.Right now, I have one SATA HDD, in IDE compatibility mode in the system. dropped the FC12 Stable dvd in, the very DVD I installed the current system with, to install it again on another partition. I get to the same point every time, where it hangs:"trying to unpack rootfs image as initramfs"Googling that didn't help me much, since it mostly seemed to address people messing with their own kernel builds.
If I choose "boot from local drive" on the options list from the install DVD, it goes to "PRESS ANY KEY TO REBOOT" with a blinking underscore cursor. Where when I boot normally, it will either give me JUST the blinking underscore alone, or the FC loading screen with no progress. I suspect this motherboard is a pile of **** and needs to be RMA'ed, or simply returned. Anyone care to support or reject that hypothesis?
I messed it up with the grub in Ubuntu Netbook and the grub loader just prompt the "grub console" during the system boot.
However, I can boot manually by selecting manually the kernel:
Code:
kernel /boot/vmlinuz-2.6.32-24-generic
boot
But, of course, that is not really practical for an everyday use.
I tried with the update-grub command, but nothing happens, the grub.cfg is there, with all the kernels list, but the grub loader won't load it! It is just ignoring it!
If I load the config file manually it prompts the grub command line again (with the "welcome" message), so, it IS loading the grub.cfg, but it's not working!!!
This is the content of my grub.cfg file:
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[Code]....
I just finish setting Fedora 10 system including all the config that I like. I back up the image by using dd command.
Code:
dd if=/dev/sda of=~/disk1.img
Now, I already have an image. how do I clone this image to second unit by using PXE boot server? I already have PXE boot server and it works since I installed Fedora from network (PXE boot).
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View Relatedhas anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.
View 5 Replies View RelatedI've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.
View 7 Replies View RelatedI downloaded slackware disk 1 to 3 via torrent.Now I have 3 nice .rar files which I have uncompressed, and these two accompanying each:slackware-13.1-install.iso.ascslackware-13.1-install.iso.md5I'm running Windows XP, and have nero.The two above files appear to be image files but nero doesn't think so, and I can neither find any other image file to make my install boot cd.I read the other stickied forum topic "So you wan to be a slacker..." which seems to say I should be on the look out for these files:
cdromiso.iso
cdromiso.md5