I've spent the past 2 days attempting to get the sound working on a Toshiba A75 notebook. Here is what i've tried so far:
remove/purge alsa and pulse audio then reinstall
set up/configure OSS
download and compile latest alsa drivers. code...
My questions are: is there anyone using this laptop on Lucid with sound? Can anyone provide a new idea how to make this work if it is compatible hardware.
I have installed a Ubuntu Server 10.10 with fluxbox as X. Everything works fine except the sound. Either speakers or with headsets, it does not work at ALL. This is some informations that could help you. I need to listen music
[Code]...
I am attempting to get ubuntu working on my system.I have tried on previous systems without success, hopefully it works out this time.Currently my only major issue with it is I cannot get any sounds to play.I use a Logitech G35 usb headset and onboard audio (GIGABYTE GA-890GPA-UD3H motherboard, Realtek ALC892 audio chipset).Ideally, I'd like to be able to listen from either source, though just getting one working would be great.Ubuntu is currently not detecting any sound.
Using aplay -l, it said no sound card found. Using lspci -v, so sound devices were listed.I am a complete noob to ubuntu, I had to research to figure out what to do with 'aplay -l' (Application -> Accessories -> Terminal, type command in terminal). My Windows troubleshooting skills seem largely useless in a Linux environment.
How to install Ethernet network card module (driver) for the Notebook Toshiba QOSMIO X500-121 64-bit on Lenny?
View 1 Replies View RelatedI don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
[code]....
I'm having a problem with my wifi card: it is not detected by the network manager. I have tried going to the Hardware Drivers utility, but it doesn't find any proprietary hardware.I really am at a loss as to how to make Lucid "start over" with the wifi detection.I have installed Lucid using an existing /home, which was under 8.10. Maybe i just need to wipe out some configuration files to start afresh?
View 9 Replies View RelatedI started on ubuntu 8.10 and my wireless card has always worked,Since i did a fresh install of ubuntu 10.04 it still seems to work to a point.I can see networks, click them and use a password to connect but it never seems to carry on, I typed the password correctly and after a minute it asks for it again.I have read a post about problems other people are having and that i need to install a different program.But i cant install another program if there is no wireless as apt-get doesn't work without internet connection.So... I need to download something that will fix it (possible update if one has been released) to xp (partition) then access xp partition from ubuntu and install it.
View 9 Replies View RelatedI have a toshiba netbook, and I'm running linux slackware 13.The sound card is an HDA intel.So far I've ran alsaconf and configured the above mentioned sound card. I've also gone into the alsamixer and unmuted everything and turn the volume up.I get absolutely no audio.
View 15 Replies View RelatedI'm Running ubuntu 10.10 with kubuntu 10.10 as well so I have no problems with ubuntu but when I login with kuntuntu I have sound but I get massage that kunbutu can't detect my sound card any more would you like it to forget it.Plus I can't change volume no volume icon on task bar.
View 1 Replies View RelatedI have an old notebook computer the specs are as follow.
Intel Celeron 2.8Ghz
1.5GB RAM
40 GB HDD
1TB External USB HDD
The computer will constantly be running in my cupboard 24/7. Using it for movies, videos and pictures. Just a home file server so I can I backup all my digital items. What version of Ubuntu should I be using? Server or Desktop? Right now I'm using Windows XP Professional at the moment but I'd rather use Ubuntu personally.
Hardware : Intel atom (COM)Audio - ALC 888OS : Ubuntu 9.04Observation : Sound Card not getting detected.-> I downloaded High Def. Audio Codec as "LinuxPkg_5.13rc9.tar.bz2" from RealTek site, compiled and installed the drivers.-> But while installation I got a GUI saying "No PnP or PCI audio card detected".-> lspci command shows all other pci connected devics except sound card(ALC888).->I tried recompilation of Linux kernel to make HDA Codec as a Built-in modules (built-in ALSA driver support) ,but still there was no change in behaviour.
View 5 Replies View RelatedI have a DFI RS482 mobo with integrated sound. I am making a car puter and only have a 2GB CF card, so I installed a server install of Ubuntu. Then I got xserver-xorg, mplayer, and fluxbox. I downloaded and installed the latest nvidia driver. Mplayer spit out tons of sound errors and that's when I realized the server install has no sound. So I installed the 'alsa', 'pulseaudio' and 'pavucontrol' packages. Now mplayer does not complain and acts like it is playing sound, but nothing happens sound-wise. Pavucontrol shows mplayer as playing sound and the volume as unmuted. However the PCM output is going to "dummy output" and the configuration tab says there are no cards to be configured.
So I think my sound card is not being detected. I don't know what to do at this point.
lspci shows "Multimedia audio controler: ATI Technologies inc. IXP SB400 AC'97 Audio Controller (rev 80)"
alsamixer fails on "function snd_ctl_open failed for default: No such file or directory"
lsmod | grep 97 returns a bunch of stuff, but I'm not sure what it is.
I'm using mythbuntu 10.10 with 2 pci tuner cards and 1 SB PCI sound card. My system is detecting my tuner cards as audio devices and making one of those my default sound cardWhich file do I change to make the SB card the default sound card?
View 2 Replies View Relatedhello experts! i have a problem with my sound card (Creative SB X-Fi Xtreme Audio), Got the driver from Creative site. The problem is that the card is detected but no sound is produced, it's not muted, i already checked. also tried the latest pulseaudio but nothing seem to work. what could be the problem?
View 2 Replies View RelatedCan't find anything in any other threads...all volume controls are up, all updates applied.
View 9 Replies View RelatedI am using TOSHIBA Tecra A8 notebook and i have install Ubuntu 10.04. However sound is not working. Is there any sound drivers for TOSHIBA Tecra A8 and it's version is : PTA83E-01D023AR.
View 9 Replies View RelatedI'm a Linux noob, so please go easy on me! I've been desperate to get rid of my Windows install for a while now and have finally started to make the move over, but have a problem with my Ubuntu 10.04 install. I've scoured the help documentation and forum for days now without managing to resolve my problem, and have finally resorted to posting my problem. So I'm sorry if this has been covered elsewhere.
1 Installed Ubuntu on my laptop (Viglen Furtura S200) but the only way I have been able to get it to install and boot properly is edit the GRUB with the following acpi=off i915.modeset xforcevesa. I had to add these parameters even to boot the live CD as well. I think I'm right in assuming that this is forcing the use of a generic graphics driver, consequently leaving some visual features unavailable. I'm not really sure what turning acpi off is doing. Is it possible to resolve this? Is this the cause of problem number 2?
2 After install there is no sound. Sound preferences shows no hardware and ALSAmixer is empty when opened. I have followed the sound troubleshooting through and it looks like my sound card is actually being picked up on the board, but I fall at the point of checking the loaded ALSA Modules as my report shows that none are loaded?!
I have installed Windows7,and Redhat9 next installed but set as default.Problems:- Sound card is not detected using sound card detector.(I faced no such problem when i had installed Fedora3,and Fedora11) -Modem is not detected too when querying modem. -Could not find in PC (when Fedora was installed)or find and download needed codec packs and plugins so nearly most media could not be played.
View 1 Replies View RelatedI tried to OSS workaround to get sound running but instead my sound card disappeared totally from the system. I restored ALSA (I think) but my sound card is still missing in action. If I could get some help on how to restore that I think I could figure the rest out. I tried the sound problem sticky but I ran into the part where the poster has no solution as well. Any assistance is greatly appreciated and I'm slowly learning how the terminal works.....pretty much what windows does for you but it's more flexible at the same time. I learned on DOS so it's not totally alien....just different commands.
I also found Realtek drivers for the HL 272 which is my sound card for linux but I can't make heads or tails of the instructions to install.....
I have a toshiba notebook with Windows XP and Ubuntu studio. I removed Ubuntu partitions with the idea to install classic Ubuntu, but... grub don't recognize Windows to boot. I formatted the hard disk as slave from another PC. I installed Windows again trying to delete the grub, but, it is already there. I am trying to repair grub from Windows with: FIXBOOT, FIXMBR, fdisk /mbr from MS DOS, but that is not working.
Any suggestions:
- To delete the hard disk complete and start again everything. (deleting grub also)
or
- To repair boot sector for Windows
how to enable sound on Ubuntu. I have installed the latest version of ALSA and output:
Code:
[URL]
lspci -v
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Toshiba America Info Systems Device fdd0
Flags: bus master, slow devsel, latency 64, IRQ 16
[code]....
I have Hp Pavillion dv4-1235ee Notebook PC with windows vista.there is no sound coming from internal speakers, 3d sound blaster pro compatible sound 16 bit integrated.
View 1 Replies View RelatedI've a laptop of Compaq Presario CQ040, I installed Fedora-9 but found that there is no sound. I ran lsmod, lspci and aplay -l command and the respective output is below:
How to configure the sound card and get it working?
If I boot CentOS (5, up to date) without my USB headphones are plugged in, all sound output goes to the sound card. But if I have the headphones plugged in when I boot, all output goes to them, and the sound card does not seem to be recognised at all.
Is there any way I can force the sound card to be recognised, and chosen as the default device, when booting with the headphones plugged in? If I have booted with the headphones plugged in, and then I unplug them, go into System|Preferences|Sound, and press the Test button with sound playback set to autodetect, I get a dialog with the message: audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open audio device for playback.
Then I started System|Administration|Soundcard detection, and it detected both Intel and Radeon sound cards, but its test button did not produce any sound for either. I moved the Intel device to the top of the list in the Settings tab, and then ran "Reload audio drivers" in the System tab. I got an error message saying I needed to reboot, but I didn't. At this point, the test buttons in the Sound test tab, and in System|Preferences|Sound started working OK. Do I have to go through this rigmarole every time I boot with the headphones plugged in?
how to detected sound card or drivers.when i am trying to detect sound card by using command system-config-soundcard it gives output on gui mode (Audio Configuration) but there is nothing show on PCM device. System Configuration which i am using.
#uname -a
Linux *** 2.6.18-8.el5 #1 SMP Thu Mar 15 19:46:53 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
#lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
[code]....
I have a toshiba m305d satelite laptop
i installed ubuntu karmic 9.10 and evrything seems to be working fine including wireless and ethernet which was not working previously ..
but now with alsa my mic was not working and hence i uninstalled alsa and installes oss4 as was directed by other forums ..
however with alsa my sound was working in skype but now nothing seems to work ..
i am getting error as "problem with audio playback"
i am using skype 2.0 as 2.1 was said to be not compatible with oss4
also the sounds in my pdgin im client is not working ..
here is my component information code...
i have tried checking mic using ossrecord but dint get ne output..
i also tried sound recorder which also dint work with both alsa and oss4
now the thing is with oss4 even the speakers are not working for some applications like pdgin and skype which was working with alsa
In Maverick, I had sound working through a USB sound card and through my laptop internal speakers. The built-in headphone jack did not work. After upgrade to Natty, only the internal speakers work, so I have no way of playing through external speakers or headphones. My ALSA debug output is here: [URL]..I have been using pavucontrol for mixing and output selection, and nothing is muted. Sound works through internal speakers, built-in analog output, and USB sound card in Windows, so there is no hardware problem.
Getting either working would be fine. I may be failing to understand fundamental things.
I recently installed Ubuntu Natty on my Toshiba Satellite A210-139. Everything works fine except the microphone. I can hear a crackling sound also when I record using Sound Recorder, but it's not too bad. The big issue is with skype, where, besides an annoying, loud white noise, the receiver hears me quite intermittently. I tried many things. Firstly, I played around with Alsamixer and Pulseaudio with every possible combination. Didn't work. I also tried what seemed to solve the problem to many users: replacing
Code:
load-module module-udev-detect
with
Code:
load-module module-udev-detect tsched=0
in /etc/pulse/default.pa
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedIve just installed a fresh 10.04, and my Xfi- Xtreme Music card isnt showing up ion the sound options.Ive tried installing the latest alsa using the script thing, and its still not showing up.
View 4 Replies View Related