booting 4m external it goes into rescue mode saying uknown partitionwen i boo 4m computer grub it says no such device.Cannot even browse via grub command line. Says unknown partition.Posting via mobile
View 4 RepliesAs the Title states, "update-grub" does not detect the windows xp partition on /media/sda1. And, when I attempt to mount it from teminal nothing happens, and from nautilus I receive the following error: "Error mounting: mount exited with exit code 2:
mount: only root can mount /dev/sda1 on /media/sda1" I am root.
I've searched quite a bit and cannot find a solution to why using update-grub cannot detect my windows 7 partition Here is a log of the bootinfo script(hopefully it pastes correctly...)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
[code].....
I installed Ubuntu 9.10 yesterday on my computer. I had Windows XP and Windows 7 (I deleted the Windows 7 partition and installed Ubuntu 9.10). However, after installing Ubuntu, I couldn't access the grub boot menu. So I googled, and I found out how to make the menu show up again. That was okay. But Windows XP didn't show up. So I googled a bit more, searched the forums, and I added the following entry to my 40_custom file code...
As far as I know, that should work. The uuid I entered there is the one that gparted told me was the uuid of the partition. However, this isn't working. I get a disk read error when I try to boot my Windows XP.
According to my gparted, my Windows XP drive is inside an extended partition? I wonder if that has any influence on why I'm getting the disk read error, or anything. It's either that, or my 40_custom entry is wrong. I've been trying to sort this out for a while now, and I'm afraid I'm not getting anywhere with it.
I have a laptop Acer Aspire 5538 (AMD Turion 64x2). I just installed Ubuntu 10.04. I like it but I still need windowsXP to run some ''old'' software. So Installed WindowsXP Media Center and Windows7 Home Premium (from my recovery DVDs). But Grub2 only detect Ubuntu and Windows7, and not WindowsXP! I undated Grub2, reinstalled it, manually modified it but no success. I finally reinstalled WindowsXP M.C. and reboot on Ubuntu by reinstalling Grub2 with the liveCD : no solution! (even before installing Ubuntu, Windows7 wasn't able to detect WindowsXP).
View 9 Replies View RelatedI want to install distro directly from isoand came to know that this can be done using grub2so ,i installed grub2 in fedora 14 andIn /etc/grub.dpasted the following lines in
40_custom
#!/bin/sh
echo "Install" >&2
[code]...
I installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.
The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.
But now the problem is, GRUB2 fails to detect the Windows XP installation.
Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?
The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.
I am trying to install windows 7 on my harddive, I am running ubuntu 10.04 and have windows 7 on DVD.I was until recently also using uberstudent, which I deleted (100 gigs) to make space for windows.However once I get to the windows start up I get a message: setup cannot detect or create a partition for this partition. (not word for word).
View 1 Replies View RelatedI tried searching for this both in the forums and on google but it seems that everything goes back to MBR installation. I know that "grub-install /dev/sda1" should install it to the sda1 partition, but instead of installing it keeps giving me the following error:
Code:
grub-probe: error: cannot find a device for /boot/grub.
No path or device is specified.
Try ``grub-probe --help'' for more information.
Auto-detection of a filesystem module failed.
Please specify the module with the option `--modules' explicitly.
I tried this with a fresh installation of Karmic on both of my PCs. I tried with --recheck option as well, same error. Installing it to MBR works fine, but I don't want it there, have another bootloader chainloading grub. Every single guide I found installs GRUB2 to MBR, and some briefly reference to "grub-install /dev/sdaX" without going into any detail. At first I thought the problem was because Ubuntu was installed on a logical partition, so I created a separate /boot partition and formatted it as ext2, still getting the same problem.
what will i do? so that i can install ubuntu on that partition?
View 2 Replies View RelatedI have installed 9.10 to an existing Vista machine. Here is the fdisk
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 9 72261 de Dell Utility
/dev/sda2 10 1315 10485760 7 HPFS/NTFS
/dev/sda3 * 1315 14031 102145543+ 7 HPFS/NTFS
[Code].....
I recently installed windows 7 and of course it got rid of grub2 for me. I tried restoring it but when I try to mount the ubuntu partition (sda3, extended filesystem) I get the error "mount: you must specify the filesystem type"
View 9 Replies View Relatedi had ubuntu and slackware installed together for a while, i just needed xp to do some native language work so i installed it on my extra partition but then i messed up the grub menu, however i reinstalled it from live cd.. but now the problem is i dont know how to add a xp in that.
i'll give you my fdisk -ls output :
Quote:
/dev/sda1 1 12803 102840066 83 Linux
/dev/sda2 12804 14267 11759580 83 Linux
/dev/sda3 14268 15035 6168960 82 Linux swap / Solaris
/dev/sda4 * 15036 19457 35519715 7 HPFS/NTFS
[Code]....
I had to reinstall Windows, which has obviously overwritten my lovely Ubuntu Natty
I would like restore grub2, however failling to do so
I'm running:
Code:
sudo mount /dev/sda1 /mnt/boot
sudo cryptsetup luksOpen /dev/sda5 crypt1
Enter LUKS passphrase:
key slot 0 unlocked.
[Code]....
I am sitting in front of an Ubuntu which was installed previously by someone else. How can I find out if a swap partition was defined?Is it always a swap partition or only a (ONE) swap file (like in Windows XP) ?If there is currently no swap partition: How can I create one and tell Ubuntu to use it?How can I conversely tell Ubuntu NOT to use a separate swap partition but to use
View 2 Replies View RelatedI have drive C/ with Vista, D with as of now, nothing and a third logical partition with Ubuntu on.
I want to do a clean install of Vista on top of my current system, just on C.
Will this re-install the Windows MBR and prevent Grub2 from booting? If so, how to I re-set grub2 as the MBR?
I've read and read & am still no smarter. I've tried to make a persistent partition(one that mounts whenever I boot/login). Either I don't have the right file or syntax, I've given up and need help. Please tell me exactly which file to edit and the proper syntax to put there. The partition on my machine I want to do this for is "sdb2" uuid "02f5852a-c3e2-47e8-b1dd-93592f1f87ee" label "archives"
View 5 Replies View RelatedI have a dual boot setup with Windows 7 and Ubuntu. Lately Windows 7 has been causing me all kinds of grief and I decided that it would be better to just restore it back to factory settings. I have a Windows 7 recovery partition (hidden) that I can see from Ubuntu, however Grub2 does not detect it. It only has two identical Windows entries that take me into Windows (though in /boot/grub/grub.cfg they point to hd0,msdos1 and hd0,msdos2 respectively).
I have searched far and wide on the Internet on how to gain access to this recovery partition to no avail. I even found a link from Lenovo's website that details how to do this in the old version of Grub, though it doesn't work in Grub2.
Here are the most useful links that I have found thus far, both fall short unfortunately. [URL]
I have already backed up all my data, so I can nuke the whole disk if that's what it takes, but I don't actually have a Windows Recovery CD, only the hidden partition which I can't seem to boot into.
I also saw some posts where people were having trouble disabling the recovery partitions from appearing in the Grub menu, their answers often consisted of people telling them that it's not possible to disable the recovery partition from appearing without hiding the main Windows Install, oh the irony!
As a big supporter of Ubuntu, after installing Ubuntu 10.10 on my mums laptop i decided to also install it on my sisters Acer Aspire one netbook.
The specific netbook had pre-installed Win7 starter. Everything went really smooth with the installation with ubuntu 10.10, Grub menu was also loading pretty well but when i chose to load on windows it loads the recovery partition of the hard drive.
The issue is that the netbook, like most netbooks and laptops, has a hidden partition which is used to recover Windows on the system. My Grub2 loader added this partition as an option to load windows with result me not be able to boot on windows ...well i do can load but it loads the recovery of windows.
I get the error - 'You must specify the filesystem type'.I used the syntax on the GRUB2 page:mount /dev/sdb3 /mnt but it returns the above error.Is there additional parameters to the code???
View 1 Replies View RelatedI tried to install grub2 in partition, not in MBR.I have installed grub4dos in MBR, and I prefer to install grub2 in sda6.sda6 is ext3 formated and has Debian squeeze installed on it.
View 1 Replies View Relateddrive is as follows:
NTFS Partition (Storage)
NTFS Partition (Win7)
Ubuntu
I am trying to put GRUB2 on the Ubuntu partition, but it will only let me pick the first two. If I pick the Ubuntu partition in the last dialog bix, it is listed as /dev/sda-1 I also have no idea why is says "-1", because the first two are fine at 1 and 2 respectively.
On my Samsung netbook, I have successfully got a pretty speedy dual-boot of Windows 7 Starter and Ubuntu 10.10
I set up Burg, to well, replace Grub2 in favour of a more attractive interface and so far so good. I know that I can hide the older Ubuntu kernels/recovery slots by pressing the 'F'key. However, the Windows recovery partition still shows up. So it looks like this:
Ubuntu - Windows 7 - Windows Recovery (vista)
Basically, how can I hide the Windows Recovery partition? If I ever do need to use it, I can access it alternatively by pressing F4 at boot.
In Mint 10, how can I move Grub2 from the mbr to the root partition of Mint?
View 3 Replies View RelatedI have installed UNR 9.10 Karmic on new Asus EEE pc 1008HA to dual boot with XP. Like many new pc's it has a hidden partition to recover the factory hard disk settings and Microsoft Windows XP. Unfortunately, GRUB2 has picked this up and is showing the recovery system in the boot menu. Clearly this is dangerous because the user could reset the pc. How do I remove or hide this boot start up option? Other thoughts: I do not believe Easybcd works with xp/linux. is there another easy bootloader?
View 7 Replies View Relatedboot up in to chameleon, lists only Mac OS X as a boot option. Reboot, load Ubuntu 10.4 install cd, get to a terminal, mount /dev/sda3 /mnt grub-install --force --root-directory=/mnt/ /dev/sda3
reboot, let chameleon come up, it sees both Mac OS X & Ubuntu partitions and I can boot to either or happily, now here is the problem... If I select linux and boot in to linux from chameleon, i am brought to the grub menu, where i can select the first choice which is normal ubuntu 10.4 and every thing is great... until I reboot and my linux partition no longer shows up in chameleon, as if tthe act of booting in to grub is changing something / deleting itself from the partition? and I have to do the whole thing over again. SO, not having to even go in to OS X, I'm not sure thats really the concerns more as I'm doing something wrong with grub.
I have multiple distros that I chainload and I have installed a grub2 shell to the partition and can boot manual. I can not seem to get a grub.cfg file to work. Is there a directory that needs to be built for this file?
View 9 Replies View RelatedI've installed Lenny with no problem, but I tried switching to Squeeze, and grub for some reason didn't pick up on the Windows partition this time - it just shows the two Linux options (debian and debian single-user). I check the menu.lst file (which I've edited under Lenny with no issues), but for some reason it doesn't exist at all in this install. Is it in a different location with Squeeze maybe?
why grub didn't pick up on my Windows install?
I have an old BIOS (only 149 GB detected in 160 GB drive). I have installed very few OS as a result - Windows in first 80 GB , 2 distros (20 GB each) in next 40 MB which is within the 149 GB. On issue of "update-grub" grub seems to detect all OS and generates grub.cfg. But on boot , one distro does not appear in the menu.
View 3 Replies View RelatedAfter installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off