know how to get ADF ( Auto Document Feeder ) on a printer to work from command line?
Running F12 and my printer is HP OfficeJet 7310xi
---------- Post added at 10:57 PM CDT ---------- Previous post was at 10:17 PM CDT ----------
I found this scanimage -b --batch-scan=yes > output.pnm
I have an Epson Workforce 520 all in one that sane recognizes. If I tell sane ( via Simple Scan in Mint Linux ) to scan it scans only from the flatbed. I'm pretty lost here. I want to scan from the document feeder. Do I need to get another model? If so, which would work. I searched the sane hardware compatibility list, but it is not easy to determine if a scanner's ADF works from that list..
View 1 Replies View RelatedI was recently given an HP Officejet 6310 all-in-one. While I could care less about printing, I have a laser and can use wife's inkjet for the rare times I need color so any ink cartridges in this one would just dry out. What I really want is to be able to use scanning over the network and hopefully the document feeder.
So I can scan multiple docs as a batch instead of having to change by hand. Has anybody done this before with Slackware? I went to HP's site and didn't find Slackware listed for hplib download. I went to the sane mailing list, but my posts keep getting bounced due to "greylist", and that never happened before.
I've got some documents in DjVu which I'll like convert to PDF. Is there a way to do this using command line OSS tools?
View 2 Replies View RelatedI've Ubuntu installed on a SD card running on my Eee PC 1000H and have to type in, everytime after startup, this line:
Code:
sudo hdparm -B 1 -S 1 /dev/sda
to turn off the noisy HDD. How can I auto execute this command?! System>Startup Applications didn't work
In dealing with the Nvidia Powermizer, I have to set it to "Prefer Maximum Power" mode from adaptive mode in order that I can avoid laggy in using my GUI. However, it doesn't save this setting so I have to manually tweak it everytime........
Someone on the web taught me to use the following command line:
nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1
running it in the terminal it will set to the mode I want.
Would I be able to make my computer run the above command in terminal everytime it starts? I tried to put the command in the start up applications and it seems not working.
H ow do you set up a printer on the command line in linux?
View 1 Replies View Related I set up Samba using command line terminal, and my network does not work. I have Samba username and keyring passwords all set, then I go to gui system-config-samba, and my samba user profile password is incorrect. In the past, I have used a 10 letter password, however, every time I boot the computer, I have to go back in and re-enter the password.I wonder if samba is truncating the password because it only accepts an 8 character password? I have deleted the user, and added a new username, and it is still doing it.
If I go into the gui and re-enter the password, usually I can get the network back up with my windows machine. All of the parameters are correct, I use the network to transfer files from my Windows to my Fedora drive all of the time when it works.
I have installed opensuse on VirutalBox , during installation I said "yes" to autologin as normal user.After installation and restart , it shows follwing message "Logging in Laks ...Cannot enter home directory . using /"I can login as single user by passing "single " in grub.
View 9 Replies View RelatedI try to print with an HP 14000 PSC on Fedora 11. The printer is detected, send a document, it goes on the queue but does not get printed. The status is stopped. The printer status stay on idle with /usb/lib/cups/filter/foomatic-rip failed. I try to restart the printer, unplugged reboot; nothing. I used the same printer on F10 was working fine.
View 3 Replies View RelatedI have printer in CUPS that due driver problems (hp 1010) form time to time goes into pause. I would like to write a shell script that will be once per hour resuming printer in cups.But I have no idea after googling for couple of minutes how to resume printer from shell command line.
View 5 Replies View RelatedI am trying to install a printer server in the command line.
Does anyone know of good tutorials? or could explain it to me.
I already have cups installed. I just need to install the correct driver which is the Canon MP180 and set it to share.
How to enable Printer in CUPS using Command Line?
View 3 Replies View RelatedDoes anyone have an example of selecting a font in an HP printer from the command line?
View 2 Replies View RelatedI'm from a Solaris (printer.conf) background and having trouble setting up a printer on the network. My CentOS box does not have a GUI interface available. I have been playing with lpadmin trying to add a printer - which it did, but everything is disabled, and the "enable" command is not found on my machine.
How do I make a simple printer on my network talk to my centOS box?
Here's the printer.conf from a Solaris machine that works:
raphael:
:bsdaddr=igppps1,raphael,Solaris:
And the printers.conf from the CentOS box:
lumina# more printers.conf
# Printer configuration file for CUPS v1.2.4
[Code].....
I work at The University of Alabama as a sysadmin on various HPC resources and also provide support for faculty using Unix systems. I've run into one problem that is affecting two different desktop systems running CentOS 5.3.oth of these systems have the latest updates. These machines have standard network-attached printers. One is an HP LaserJet 3250 and the other is a model that is pretty close to that one.Previously these users were able to print from graphical applications such as Firefox, but now when the print dialog is opened on ANY graphical application, it causes a hard freeze on that particular app.Printing from the commandline via `lpr` gives no issues and test pages from the Printer Admin interface also succeed.This problem has me stumped, so I'm looking for any insight as to what could have changed. I do not know what changed between the time when the printers worked graphically and when they stopped, but the users assure that they have changed no settings. The only thing I can suspect is a rogue update since this is affecting separate users on separate machines with separate printers.
View 4 Replies View RelatedI just recently installed ubuntu server. I want to be able to install packages and such but can't until I connect to Internet. I tried wifi but couldn't figure out how (I'm a n00b) but now I have ethernet and can't figure out how to make it work. So my question is, how do I connect to my Ethernet with ubuntu server, I could if I had graphical, but I can't get that until I have Internet. I didn't configure network during install, so how do I do it now?
View 3 Replies View Relatedi've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedI understand that Fedora 14 using automatic printer detection. When i plug in my Epson DX4450 printer nothing happens and i can find no way to configure the printer. This has never been a problem with any other linux distro. How can I correct this problem? Why does auto printer detection not work?
View 3 Replies View RelatedRecently, I bought the HP Officejet 4500 especially because of the automatic feeder for the scanner. The device is not supported by Fedora, but I found the driver for it at the HP driver site for Fedora 11 and / or 12.Now, I have two questions. First, I wonder why these drivers are not part of a Fedora distribution yet. Is there still some issue with it going on (something related to my second question or something completely different)?Second, the software (Sane) doesn't recognize different sheets of paper. When I place some 20 sheets of paper in the automatic feeder, the scanner scans them all, but only the first sheet is processed by Sane.Now, I saw that Sane in Fedora 13 is different than in Fedora 11 or 12. I expect it is improved, but I have not been able to work with it yet. Can I expect that it does recognize different sheets of paper from a scan with an automatic feeder?
I add a "command line" or "mini-commander" applet to the panel in gnome, but nothing happens.
If I launch "/usr/lib/mini_commander_applet" on a terminal, I get a dozen such applets, for all the times I tried, but then I have an xterm tied up.
If I launch the same from "alt-f2" it does not work, and gives no error.
Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar)
I did a dist-upgrade this morning, and now every time I boot, it only goes to the command line login prompt.
Attempting to stop and restart gdm does nothing besides make the screen shake for a second, and I've installed all available video drivers from Available Drivers, and the ones from nvidia's website.
I am, however, able to boot into recovery mode and then select failsafe graphics mode, and get into the desktop.
Any ideas how I can get my normal boot to work?
Code:
This won't work in a script but it WILL work on the commandline...
Here is my output when I try the script:
Code:
Also, what is the at the end of the path in the error?
CUPS was not originally installed on my server, I have installed it but cannot print to my network printer. On my laptop, I can... they are both running the same version of Debian. What could be missing?
Here are some details...
I have two computers running the same version of Debian. One is a server with no GUI and the other is my laptop with GDM installed. My laptop (which prints with no problem) is connected via Wifi. My server is connected directly to the router via Ethernet. I cannot print from the server.
The printer is a Canon Pixma MP495 that connects to the router via Wifi. I have downloaded drivers for the printer from [url] and installed them successfully using dpkg on both computers.
Right now I have a regular text file that I am using for a test page. To print from my laptop (with success) I type:
Code:
This does not work from the server. What could I be missing?
lpq run on server:
Code:
lpinfo readout:
Code:
Writing script to create backup of file by adding datetime to file name. Basically test for file presence if there, cp with datetime then rm original cp works fine from command line but get cannot stat `full path to file': No such file or directory
Code:
Here are the errors: cp: cannot stat `~/html/CVP_dadamail/.dada_files/.logs/errors.txt': No such file or directory rm: cannot remove `...': No such file or directory
The for statement is a placeholder as I have same file to backup out of several directories. using "bash -x scriptname" -OR- inserting echos, I can see I've constructed the strings properly. Believing it might be related to the hidden directories, I tried setting the shopt "glob" options to no avail.
Ultimately I'll add the other directories to the for loop and then run this from a cron job, so if you see potential pitfalls knowing I'm headed in that direction...believe construct would be
Code:
When printing from ubuntu (zorin) to a hp officejet 5610 on a windows 2003 server, via samba, all I get is a Remote downlevel document on the print queue and nothing gets printed
View 1 Replies View RelatedI keep time sheet entries at work in an sqlite database called 'timesheet'. I have a shell script called 'today' which queries for all timesheet entries which are less than 24 hours old; it looks like this:
Code:
#!/bin/bash
echo "select datetime(start_time, 'unixepoch', 'localtime'), datetime(end_time, 'unixepoch', 'localtime'), project, site, duration from timesheet where start_time > strftime('%s', 'now', '-1 day', 'localtime');" | sqlite3 ~/.timesheet/timesheet.db
In an effort to make it more readable, I've put the query inside a here document:
Code:
#!/bin/bash
cat | sqlite3 ~/.timesheet/timesheet.db << query
select
[Code]...
I have noticed that a common issue to several distros is the fact that the networking subsystem doesn't automatically detect the link if an ethernet connection is disconnected and then re-connected to the NIC after boot. If the ethernet cable is connected after the system is up and running, nothing happens - ethtool eth0 shows link detected: no, and you have to restart the network service to let the NIC know that there is in fact a link, and actually connect. I have a Fedora14 (KDE) box with a brand new Asus motherboard with embedded NIC. Everything works great except the auto-detect of a freshly connected ethernet connection if the link is down to begin with.
Am I missing a ethernet link sentinel utility or something, or is this just the way linux works? I have done plenty of research on plenty of posts, and it seems this is a common problem, with no solution other than manually or programatically restarting the network service in a script to detect the link after a disconnect.
How, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies View RelatedI have a 50000 line(ish) set of records in a file. I have another file where I have filtered out all the line numbers for those which have an error of various types. e.g column count, field type etc. I want to get all those lines into a separate file so I can sanitise them. There are abt 3-4000 of them.
How can I access those lines which I want to isolate into a single file? I have all the usual linux stuff available and a bit of understanding of regexps.