I have an Epson Workforce 520 all in one that sane recognizes. If I tell sane ( via Simple Scan in Mint Linux ) to scan it scans only from the flatbed. I'm pretty lost here. I want to scan from the document feeder. Do I need to get another model? If so, which would work. I searched the sane hardware compatibility list, but it is not easy to determine if a scanner's ADF works from that list..
View 1 Replies
Recently, I bought the HP Officejet 4500 especially because of the automatic feeder for the scanner. The device is not supported by Fedora, but I found the driver for it at the HP driver site for Fedora 11 and / or 12.Now, I have two questions. First, I wonder why these drivers are not part of a Fedora distribution yet. Is there still some issue with it going on (something related to my second question or something completely different)?Second, the software (Sane) doesn't recognize different sheets of paper. When I place some 20 sheets of paper in the automatic feeder, the scanner scans them all, but only the first sheet is processed by Sane.Now, I saw that Sane in Fedora 13 is different than in Fedora 11 or 12. I expect it is improved, but I have not been able to work with it yet. Can I expect that it does recognize different sheets of paper from a scan with an automatic feeder?
I was recently given an HP Officejet 6310 all-in-one. While I could care less about printing, I have a laser and can use wife's inkjet for the rare times I need color so any ink cartridges in this one would just dry out. What I really want is to be able to use scanning over the network and hopefully the document feeder.
So I can scan multiple docs as a batch instead of having to change by hand. Has anybody done this before with Slackware? I went to HP's site and didn't find Slackware listed for hplib download. I went to the sane mailing list, but my posts keep getting bounced due to "greylist", and that never happened before.
know how to get ADF ( Auto Document Feeder ) on a printer to work from command line?
Running F12 and my printer is HP OfficeJet 7310xi
---------- Post added at 10:57 PM CDT ---------- Previous post was at 10:17 PM CDT ----------
I found this scanimage -b --batch-scan=yes > output.pnm
how to get xsane to scan a document and have it display as a full 8.5x11 sized document instead of something half that size? I've been trying and trying and can't seem to figure it out.
View 3 Replies View RelatedI've read a bit here about making PDF's searchable using a bunch of different programs and utilities. It seams with errors and I'm not sure if it has been ironed out.I have hundreds of old documents that I need to scan. I would like to scan them to searchable PDF's. I won't have issue scanning them to plain PDF's, but how do I make them searchable. Is there a scanner available to ubuntu that will do this, currently I have simple scan.
View 3 Replies View RelatedFor some time, because of the Arthritus in my hands, I've been looking for a program which will allow me to scan a document into my PC, fill it in with my keyboard and then print it out, does anyone know of such a program ?
View 6 Replies View RelatedIam using xsane to try and scan a document to computer my scaner is a HP photosmart c3180 it only wants to scan part of document has any one found a way to get round this
View 2 Replies View RelatedRequest help with scanjet 3500c operation. xSane .996 in Ubuntu sees scanjet and scans. As soon as scan completes, the xSane windows(2) disappears and there are no copies in the intended save folder in Documents. Upon original attempt, the xsane windows had an additional third "Preview" window which has not returned since that first scan attempt?
One is not a computer guru by any imagination!
Info; the scanjet worked very well on the other "doze OS" and seems now, does not in the Ubuntu OS. In Doze, there was also a program for a HP PhotoSmart 3200 running and when I added the scanjet it might have been happy with that driver. Currently I do not have access to the driver disc for the 3200 with me. Too, it now takes ~45+ seconds for the scanjet to begin as compared to 2 - 3 seconds on doze.
Some internet self help searching seems to suggest the xSane 1.0.18 is the driver choice to use with the HP 3500c scanjet. When attempting to download, an archive "Failed" notice appears. I am a bit lost from here.
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies View RelatedAnyone have better documentation or an update to the this version of the file Tomcat HOWTO openSUSE as that document is referencing 10.2. Or a document for use with SLED.
View 3 Replies View RelatedSo my 8 year old HP has finally bit the dust. Any opinions on a new HP model?
View 14 Replies View RelatedI don't care for domain 'authentication' by an "Authority". I don't trust no one, so CA's to me are as trustworthy as the gypsy in the park.
I can use a self-signed certificate, but the problem is most browsers makers are Fn idiots that say the connection is not secure, when it actually is, but because I did not folk out cash, it makes my website look bad. I can understand the need for a 3rd party to verify the domain host to prevent man in the middle attacks, but I do not care for this.. and browser makers should take more responsibility and introduce different padlocks for types of authentication, rather than saying "this connection is encrypted, but not secure because its self-signed". What a load of horse s***!
How many times does people stop to read certificate authoraties? I sure don't. I only care weather or not the connection has been encrypted.. so, I am looking for a way for simply providing encryption for my website.
From what I understand, when you submit a CSR to a CA, it includes the private key, meaning that the CA would be able to see the encrypt data, should they get hold of it. This is not acceptable for me.
Is there anything other way to use encryption other than the SSL model that is used typically amongst HTTPS browsers today?
Currently I have a 500gb drive with Ubuntu on half of it. The other half is a soon to be Win7 install. I just picked up an identical drive for real cheap last week and I am interested in advice for going about setting up a RAID 1 for redundancy. My first road block is do I want software or hardware RAID? Is this even possible with a dualboot system? If hardware RAID is the way to go does anyone have a particular brand or model they could recommend?
View 2 Replies View RelatedPrior to purchasing this Toshiba L675D I was able on my old HP to explore other distros, but there seems to be some incomparability existing with this model that restricts 10.10 but accepts 10.04, kernel thing I assume. But in all other attempts to install, Mint, open Suse etc it loads the kernel then the Live CD freezes on a black screen blinking cursor. Have tried nomodeset with no success. Obviously Toshiba is no help with Linux and win 7 forum even cautions against creating an extended partition. Oh out of the box this baby had 3 primaries, one a recovery and hidden. Just an FYI
View 1 Replies View RelatedMy Centos disk was full. when I remove all the big files, df and du command not show right size. I reboot my server and in to rescue mode, it alert "you don't have any linux partitions".How do I fix it?I not use LVM.my server mount:
/dev/sda1 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
[code]....
I am a slackware user from slackware 9.1, these years I tried many distributions, but slackware always winner. I am familiar with server configuration and desktop setup for slackware, but I know nothing about the development model of slackware, is there a way to learn the development model of slackware?
Like, freebsd, you can checkout the kernel source, tool chains source from cvs then build it, some people will commit and check in the change sets, they have a mailing list for developers to talk about the development, for users to learn what are they doing now.
I know there are many README or Documents for slackware, but I donot know anything about internal development, is there a way? a mailing list? a source repository(cvs/git or others?)
am thinking of buying new server that is tested in slackware for my company. as file server web server mail server and a capability of multiple hardisk (sas technology)to be use as san server in the future any recommadation?
View 1 Replies View RelatedIs it possible I can install CentOS 5.3 version on IBM iSeries/eServer model 525/520.
how I will be able to perform this installation.
I have an old external serial modem without indication of make and model.
View 2 Replies View RelatedI am currently developing an small program in Python and at a certain point, I need to do some "stuff" depending on the monitors that are connected to the computer. I have an intel vga card with two outputs. I want to do something if one of the screens connected to the output is a "Dell", another something if one of the monitors is a "Nec" and another something if both monitors are connected.
So the question is: Is there any way to get the vendor/model of the monitors currently connected to the computer? I did a little bit testing. I plugged both screens to my vga card (the Nec to the HDMI output and the Dell to the DVI output), and the gnome-display-properties tool properly detected the model, size, resolution... of both screens connected. I would like to know if I can use a command on bash (or a library in python) to get the same information.
The /var/log/Xorg.0.log also shows properly:
(II) intel(0): EDID vendor "NEC", prod id 26345
(II) intel(0): I2C device "HDMIDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "DEL", prod id 41027
I could always parse that file, but it is not the best solution. I also tried the ddprobe command, but for some reason, it only detects one of the screens (the Dell, connected to a DVI cable). I am currently using Ubuntu 9.04 and Python2.4 (just in case it's relevant).
I have Ubuntu 10.04 LTS. I have a script that prompts you to insert a USB HDD/memory stick then it needs to determine its serial and model and save it to a file. The script can determine the device file of the inserted drive(ex: /dev/sdc) and if hdparm -I /dev/sdc works then all is ok. The problem is that not all USB HDDs/memory sticks work with hdparm. When it does not work I get the following:
Code:
root@izghitu:~# hdparm -I /dev/sdc
/dev/sdc:
HDIO_DRIVE_CMD(identify) failed: Invalid exchange
The other command to get the serial for USB devices of any kind is lsusb -v or lsusb -D /path/to/bus/address The problem of the first one(lsusb -v) is that it lists all USB devices and there's no way for me to script it to detect the inserted USB drive/memory stick and get the serial/model for it. The problem with the second one(lsusb -D /path/to/bus/address) is that I do not know how to get the correct USB bus address of the inserted USB drive/memory stick.
Is there any other way to get the serial number/model of a USB HDD/memory stick using its /dev/sdc device file? Is there any way to link the /dev/sdc device file with the /dev/bus/usb/address device file so I can then use the lsusb -D command to get the required info?
i have install a new qlogic hba card, but i dont know its model
View 1 Replies View RelatedI am trying to find a way to pull Node Pointers out of the model, for use in other areas of the program. The solution is probably simple but I haven't had any luck finding it.
Model for a QTreeView:
Code:
class testModel : public QAbstractItemModel
{
public:
testModel();
~testModel();
[code]....
Is there any command to find system make and model in linux like how solaris shows "Netra X4200" when we give command "uname -a"
View 1 Replies View RelatedI've recently upgraded my squeeze to sid, then installed gnome shell as default window manager.
1. Gnome shell was normal until yesterday, I upgraded new packages up to date, then I cannot log into gnome shell any more (however, fallback mode is normal). It shows a sad computer screen with message "Oh no, something has gone wrong". The only thing I can do is pressing the logout button to log out.
2. Debian is running on my thinkpad T60p, and I can choose keyboard model in Gnome2, but I can't find any options in the system setting in Gnome shell to change keyboard layout for model IBM T60/R60.
I have installed fedora 10 with mythtv. at some point the remote control was working then i had to reimage the computer again. Now the remote wont work Im not a linux guru this is why is so dificult.
i know that it is installed because i do this lsusb and get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 413c:2105 Dell Computer Corp.
Bus 004 Device 002: ID 0471:0815 Philips eHome Infrared Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
I have recently acquired me a HP all-in-one printer model HP Deskjet F2483. The printer works fine but am having issues getting the scanner to work. Following instructions I found to Google, this is what my shell looks like:
Code:
sh-4.0$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
[Code]...
I am working on a traffic surveillance project which performs various image processing tasks with a number of visual sensors and a computing platform. My basic task in the project is the power optimization/management. I am using a ZOTAC-IONITX computing platform (Intel ATOM CPU + NVIDIA ION GPU). The problems that I am currently facing are:
I am unable to model the power consumption of various components e.g., processor, GPU, hard drive, memory etc, since there seems to be no way to measure the power consumption of individual system components. Since I don't have a power consumption model, I cannot come up with a power optimization algorithm. I am currently working on Linux. Is there any way to measure/model the power consumption of individual system component?
I have already checked powertop. It doesn't tells the power (watts) consumed by a component (e.g., microprocessor). It just gives information about the power state the processor is in (However there is no way to change the power state by the user) and the processors that cause processor to wakeup.
How do I get my ubuntu 9.04 computer to recognise the USB wireless stick and then connect to my wireless d_link router?
View 1 Replies View Related
