Slackware :: HP 6310 - Hplib - Use Scanning Over The Network And Hopefully The Document Feeder
Apr 8, 2011
I was recently given an HP Officejet 6310 all-in-one. While I could care less about printing, I have a laser and can use wife's inkjet for the rare times I need color so any ink cartridges in this one would just dry out. What I really want is to be able to use scanning over the network and hopefully the document feeder.
So I can scan multiple docs as a batch instead of having to change by hand. Has anybody done this before with Slackware? I went to HP's site and didn't find Slackware listed for hplib download. I went to the sane mailing list, but my posts keep getting bounced due to "greylist", and that never happened before.
View 6 Replies
ADVERTISEMENT
Jan 11, 2011
I have an Epson Workforce 520 all in one that sane recognizes. If I tell sane ( via Simple Scan in Mint Linux ) to scan it scans only from the flatbed. I'm pretty lost here. I want to scan from the document feeder. Do I need to get another model? If so, which would work. I searched the sane hardware compatibility list, but it is not easy to determine if a scanner's ADF works from that list..
View 1 Replies
View Related
May 4, 2010
know how to get ADF ( Auto Document Feeder ) on a printer to work from command line?
Running F12 and my printer is HP OfficeJet 7310xi
---------- Post added at 10:57 PM CDT ---------- Previous post was at 10:17 PM CDT ----------
I found this scanimage -b --batch-scan=yes > output.pnm
View 2 Replies
View Related
Jul 6, 2010
Anyone have better documentation or an update to the this version of the file Tomcat HOWTO openSUSE as that document is referencing 10.2. Or a document for use with SLED.
View 3 Replies
View Related
Mar 23, 2010
I was trying to setup my Brother DCP-135C to scan for Slackware 13.0 (stable, with patches) These are the following steps taken:
1. Download the brscan2-0.2.5-1.i386.deb and brscan-skey-0.2.1-3.i386.deb driver files from [URL]
2. Use the command "ar x" to extract files from the driver files. Used "tar xvf" on data.tar.gz files to unpack the actual files to be installed. Used "tar xvf" to look into control.tar.gz to know what command to run post installation. Repacked them into Slackware packages using makepkg.
3. Depending on how the drivers are repacked, you might need to run these commands (hints take from control.tar.gz)
# /usr/local/Brother/sane/setupSaneScan2 -i
# /usr/local/Brother/sane/brscan-skey-0.2.1-3.sh 0
4. Added the following line in /lib/udev/rules.d/80-libsane.rules. I added these lines near other definitions of Brother devices.
# Brother DCP-135C
ATTRS{idVendor}=="04f9", ATTRS{idProduct}=="01ce", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
5. ensure your userid is part of group "scanner". Run xsane.
View 3 Replies
View Related
Jun 6, 2010
After installing slackware 13.1 I start up amarok and when I go in and configure the settings and it starts to scan the folder and it either hangs at 10%, stops responding all together or crashes, the library is about 130 gigs of mp3s. I do not know where to start on this one. Amarok version 2.3.0
View 4 Replies
View Related
Feb 21, 2010
I'm using FC 11 and HP deskjet F2480. the last general update completely upset my printer settings and I can no longer use my printer at all. According to HPlib diagnostics I need to enable publish shared printers which I've dome. But it persists that the printer is not publised.
This is the second time a general update has messed up my printer setting, the time before I managed to fix by reinstalling HPLib. But this time it refuses with the message 'gs (GhostScript - PostScript and PDF language interpreter and previewer)', but I have the latest version of gs already installed.
View 4 Replies
View Related
May 6, 2010
I'm trying to use network-manager in sid and it's incredibly frustrating because every 2 minutes or so it seems to scan for wireless access points, during which time my SSH connections completely hang and screw up. Pings start dropping packets as well. By doing an "iwlist scan" I can reproduce the behavior. Has anyone else dealt with this? I haven't been using network-manager, but I am currently due to mobility and needed VPN functionality... WICD with no network-manager works better but there's no gui-based VPN support. I've got an Atheros wireless device and I've read that supposedly it should be doing background scanning since kernel 2.6.32, but I haven't seen anything like that, and I'm on 2.6.32-5-amd64 currently, 2.6.32-3-amd64 behaves the same too.
View 4 Replies
View Related
May 3, 2011
I have made an EPSON RX500 multifunction device (printer/scanner) available over my router with the lpd protocol. Both PCs (ubuntu 10.04 laptop wireless, 8.10 desktop wired) connected to it can print, but not scan, since XSANE does not recognize the scanner over the network. It does hoverer both, scanning and printing, if connected with an USB cable. How can i configure xsane to recognize my RX500 over the network?
View 1 Replies
View Related
Aug 11, 2011
I have installed open suse 11.4, gnome but no luck with wireless settings so far. kernel version is iwl3945 here is stuff that i did but it says "scan is deprecated"
linux-1f6k:/home/rajbanul # dmesg | grep firmware
[ 7.249018] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[code].....
View 3 Replies
View Related
Jan 1, 2010
I have had good success with the HP OfficeJet 6310 printing and Karmic. However, recently when printing, the print job stops after a certain amount of pages ( when printing a multiple page document ). The first page almost always prints immediately. This issue occurs with PDFs, OO Writer documents and OO Spreadsheet documents. The printer status window on the printer shows "printing" and the print manager in Gnome shows printing. Sometimes the printing completes after several minutes. Other times I end up killing the job and powering down the printer.
View 9 Replies
View Related
Oct 17, 2010
Recently, I bought the HP Officejet 4500 especially because of the automatic feeder for the scanner. The device is not supported by Fedora, but I found the driver for it at the HP driver site for Fedora 11 and / or 12.Now, I have two questions. First, I wonder why these drivers are not part of a Fedora distribution yet. Is there still some issue with it going on (something related to my second question or something completely different)?Second, the software (Sane) doesn't recognize different sheets of paper. When I place some 20 sheets of paper in the automatic feeder, the scanner scans them all, but only the first sheet is processed by Sane.Now, I saw that Sane in Fedora 13 is different than in Fedora 11 or 12. I expect it is improved, but I have not been able to work with it yet. Can I expect that it does recognize different sheets of paper from a scan with an automatic feeder?
View 2 Replies
View Related
Feb 21, 2010
I would like to print a document in Xubuntu, sending it through the network to my printer connected to my Ubuntu computer. Problem is, I don't know how. The printer works in Ubuntu, but I don't know how to set it up so I can print from Xubuntu.
View 2 Replies
View Related
May 10, 2011
I'm the only person seeing this: xpdf is slow to render PDFs and navigating through a document is ponderous. The problem is there on my laptop ( Core i3 ) and my desktop ( Core i7 ). I played with the ./configure options in the Slackbuild and deleting the -mtune=i686 option made it much more responsive. It's so bad I've got Debian on a separate partition and I boot into that if I need to look at PDFs.
View 14 Replies
View Related
Jun 13, 2010
I acquired an older hp compaq presario computer version 6310us, and initially installed mint, followed by Ubuntu 9.04. Neither one recognized the onboard ethernet port. I checked the bios, and LAN is enabled. It is also enabled in the drop down menu from the toolbar on the desktop. The cable works fine on other computers, and the light on the ethernet port flashes like it does when the cable is connected. I'm new to linux, so not sure what to do to get the connection working.
View 2 Replies
View Related
Mar 13, 2010
how to get xsane to scan a document and have it display as a full 8.5x11 sized document instead of something half that size? I've been trying and trying and can't seem to figure it out.
View 3 Replies
View Related
May 30, 2011
I keep all my documents on one hard drive of a wire network, on a Windows XP computer. To access a document to my Ubuntu 11.04 machine, I can't open LibreOffice and access it from there. I have to click on the doc in the file manager; then LibreOffice opens with it. Likewise, when I try to save to the net I get an in/out error message. I have to save to the desktop and then move the doc from the desktop to the XP machine.I'm sure I'm missing some procedure. Can someone tell me what it is?
View 2 Replies
View Related
Feb 17, 2011
share the implemented "c" program for scanning the available wireless network.
View 2 Replies
View Related
Jun 20, 2010
If there has been one consistent, recurring problem over the years it has been printing. I went to print a document, but it never made it to the printer. I looked at the HP device manager and the file was in the queue, but with the notation that the printer had been "stopped." I checked the setup up with localhost:631 and everything appears to be correct. User name is in the lp group. I then removed the current CUPS package and installed the one from Slackware64-13.
Doing that solved an earlier problem with one of the newer version of CUPS. This time the document made it to the printer, but each line overlapped itself and the whole thing fit into the space of about 6 lines. Just for chuckles I saved a copy of the document to the windows partition, booted over to XP, fired up OpenOffice for windows and the same document printed out perfectly.
View 11 Replies
View Related
Mar 17, 2011
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies
View Related
Jun 5, 2010
I do have trouble in configuring my wireless network,though i configured it as what Alien BOB say(http://alien.slackbook.org/dokuwiki/...ckware:network) and google some similar Threads.My latop is Asus F83vf, wireless card is Atheros AR9285 Wireless Network Adapter.
The code when I run lspci command is code...
View 11 Replies
View Related
May 12, 2011
I have installed RHEL5U5 but I've also tested RHEL5U4 and the problem is: Once configured the multipath, I restart the server,and with the command-ll mutipath I can see the LUN presented correctly:
[Code].....
View 2 Replies
View Related
Jun 15, 2010
I thought I had a post out there that thoroughly covered this topic. But, I looked and I couldn't find it.Well, I am trying to get Sane to run so I could scan documents. I have printing set up, and the cups daemon is set to run at reboot. What are the following steps to achieve my objective,
View 9 Replies
View Related
Jan 7, 2010
Well I'm trying to set up a US robotics dial up USB Modem. When I enter WVDIALCONFI end up with a screen that says "scanning your serial ports for a modem"It scans and ends up saying Sorry'no modem was detected!Did you configure it properly with SETSERIAL?
View 9 Replies
View Related
Apr 12, 2010
I have a Brother MFC-7440N which has Linux drivers, but I can't get useful scans yet. It prints fine, but the only scanning software I've found so far, XSane and a utility just called "Scanner Utility" are both useless.
XSane is no good because it crashes every time I try to scan something.
Scanner Utility has a few problems. Unless I set the paper size to "Legal," it keeps cutting off the bottom few inches of my (US letter-size) document. It's the same, regardless of whether I scan from the auto document feeder, or with the original on the glass. Also the orientation is screwed up. When I select "Portrait," the scan comes out rotated 90 degrees, exactly the opposite of what I'd expect.
I also don't like that there's no way to go back and change the scan settings. If I want to scan another document or at a different resolution, I have to quit Scan Utility and run it again.
Neither utility will scan to a .pdf. XSane gives the option, but like I said, it crashes every time I try to scan something.
Is there a scanning program available for Ubuntu that actually works, & will scan to a .pdf? Brother doesn't supply any scanning software for Linux, just drivers, so I have to find some 3rd-party utility.
View 2 Replies
View Related
Jul 28, 2010
Is there an easy scanning program for kubuntu and where do I go to get it? My mom is running it and needs to scan things. She has the all-in-one mentioned in the thread title.
View 4 Replies
View Related
Apr 15, 2011
I want to scan in a book and convert it to a pdf AND make an OCR text of it. I am looking for somebody who can help me to gie me some BASH helps to combine the pieces I have already got:
Workflow:
1. scan in the book pages: coverpage (=1), page 3, page 5, page 7 .... n (At this point the book is upside down)
2. scan in the book pages turn the book and scan from the back to the front:
back coverpage (= n-1), page n-3, page n-5 .... 2
3. run the program All scanned images are in directory scannedimages
#!/bin/bash
mkdir temppic
for i in `find scannedimages/*.png`
[code]....
how to make it, but I have no knowledge how to program it.Maybe something like that exists already and I can save the programming effort.
View 1 Replies
View Related
Nov 29, 2010
Recently I've been going over a few resources (like Guide to the Secure Configuration of Red Hat Enterprise Linux 5) some forum members have provided and I've been using other resources I use for work (like the UNIX STIG requirements). I would like to improve my skill-set on hardening a linux server (for work and personal interest). Is there a specific linux distro I can install that is purposely corrupted/vulnerable where the sole goal is to secure it, and then have the means to scan it to make sure all vulnerabilities are patched and secured?
View 6 Replies
View Related
Aug 12, 2010
I am searching for some program for scanning documents to PDF file, I am using samsung SCX-4300. I tried XSane but the files I get are to big (1-3 Mb). Is there some other application for scanner I don't want to star my Windows just for scan some document.
View 2 Replies
View Related
Jun 10, 2010
Is there a way to stop Grub from scanning the optical drive for boot media before getting to the boot menu? Or to skip this step? (I have the drive excluded from the BIOS's boot menu but then Grub still checks it anyway)
View 1 Replies
View Related
