Ubuntu Networking :: Didn't Configure - Auto Network Config Command Line
Jan 22, 2011
I just recently installed ubuntu server. I want to be able to install packages and such but can't until I connect to Internet. I tried wifi but couldn't figure out how (I'm a n00b) but now I have ethernet and can't figure out how to make it work. So my question is, how do I connect to my Ethernet with ubuntu server, I could if I had graphical, but I can't get that until I have Internet. I didn't configure network during install, so how do I do it now?
View 3 Replies
ADVERTISEMENT
Apr 18, 2009
Ive been struggling to configure a wireless interface on Fedora 9I need to configure wlan0 command line only with NO display managerIve tried setting up /etc/sysconfig/network-scripts/ifcfg-wlan0 with the right information, doing dhcpbut no ip is retrieved. Checking the dhcp server logs on the DHCP server - no request is received.The link light on the wireless nic is not on either. iwconfig shows it has an Access point associated and an ESSID but im not getting back any IP.There seems to be very little documenta on how to set up wireless nics command line only on Fedora
View 1 Replies
View Related
Jun 9, 2009
I have been using an ethernet ADSL Westell modem for years and would like to upgrade to a newish Allied Telesyn USB Modem AT-AR206 in Fedora Core 10. The modem power goes on when plugged into my pc and lsusb shows that it has been recognized with this:
Bus 002 Device 003: ID 1110:9022 Analog Devices Canada, Ltd (Allied Telesyn) ADSL Loader
I used system-config-network but don't have the option of adding this new hardware.
How do I configure my network to use my DSL line?
View 3 Replies
View Related
Feb 22, 2010
I've Ubuntu installed on a SD card running on my Eee PC 1000H and have to type in, everytime after startup, this line:
Code:
sudo hdparm -B 1 -S 1 /dev/sda
to turn off the noisy HDD. How can I auto execute this command?! System>Startup Applications didn't work
View 3 Replies
View Related
Aug 13, 2011
I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.
View 6 Replies
View Related
Mar 10, 2010
I frequently ssh into machines to do work. In some cases, the machine is headless so there is no option to log in.Under Debian and on older versions of Ubuntu I would pull out the avahi and network-manager packages and manually configure the interfaces file to my liking and be done with it.However, I would now like to learn how to work within avahi/network manager. So, is there a doc somewhere explaining how to work with modern Ubuntu networking at the command-line level? Ie: Setting up a wireless connection, setting static/dynamic IPs, etc?
View 3 Replies
View Related
Mar 6, 2011
I'm running Ubuntu 10.04 LTS, Lucid Lynx and I'm having problems implementing changes to interfaces.I have made changes to my interfaces via the GUI but when I open a terminal window and so a ifconfig I find that nothing has changed. I've opened an editor and looked at etc/network/interfaces but changes made with the GUI never make it to the config file.Does the networking GUI result in changes to the etc/network/interfaces file.
View 1 Replies
View Related
Dec 20, 2010
In dealing with the Nvidia Powermizer, I have to set it to "Prefer Maximum Power" mode from adaptive mode in order that I can avoid laggy in using my GUI. However, it doesn't save this setting so I have to manually tweak it everytime........
Someone on the web taught me to use the following command line:
nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1
running it in the terminal it will set to the mode I want.
Would I be able to make my computer run the above command in terminal everytime it starts? I tried to put the command in the start up applications and it seems not working.
View 5 Replies
View Related
Jul 10, 2009
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
View 2 Replies
View Related
Aug 17, 2009
I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.
After this typingiwconfig wlan0
result is:
wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
[Code]....
I installed ndiswrapper in order to use ipn2200 WinXp drivers.
View 4 Replies
View Related
Jan 8, 2010
I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.
View 1 Replies
View Related
Nov 29, 2010
I set up Samba using command line terminal, and my network does not work. I have Samba username and keyring passwords all set, then I go to gui system-config-samba, and my samba user profile password is incorrect. In the past, I have used a 10 letter password, however, every time I boot the computer, I have to go back in and re-enter the password.I wonder if samba is truncating the password because it only accepts an 8 character password? I have deleted the user, and added a new username, and it is still doing it.
If I go into the gui and re-enter the password, usually I can get the network back up with my windows machine. All of the parameters are correct, I use the network to transfer files from my Windows to my Fedora drive all of the time when it works.
View 2 Replies
View Related
Feb 27, 2011
I have a CentOS 5.5 server running currently with a Netgear gigabit ethernet card and for wifi I have a wi-fi card with the chipset: RT2860.Now I have gotten the ethernet card and wi-fi card working but my main question is: How do you bridge the connection between the ethernet card and the wi-fi card to create a wireless network with a hidden ESSID if possible and WPA encryption? (So the server basically acts as a wireless router as well as doing all the other stuff I need to do on it).
View 2 Replies
View Related
Mar 2, 2010
I have installed opensuse on VirutalBox , during installation I said "yes" to autologin as normal user.After installation and restart , it shows follwing message "Logging in Laks ...Cannot enter home directory . using /"I can login as single user by passing "single " in grub.
View 9 Replies
View Related
Jan 14, 2011
I just installed Debian 5 on my system and I didnt have it on the network and I chose not to configure networking during installation. I plan to use static ip to stay on a private network most the time, but right now I want to quickly get out on the net to get some things..... So I want to get dhcp going and connect to my router to get out.I set up my interfaces file to say:
Code:
auto eth0
iface eth0 inet dhcp
[code]...
View 6 Replies
View Related
May 4, 2010
know how to get ADF ( Auto Document Feeder ) on a printer to work from command line?
Running F12 and my printer is HP OfficeJet 7310xi
---------- Post added at 10:57 PM CDT ---------- Previous post was at 10:17 PM CDT ----------
I found this scanimage -b --batch-scan=yes > output.pnm
View 2 Replies
View Related
Mar 29, 2011
I'm sitting here at school, and I need to forward a port from my router at home to my Ubuntu box also at home. I stupidly forgot to turn on external administration on the router, but I can still SSH into the server. Is there a way I can access the router through the server via the command line?
View 4 Replies
View Related
Nov 15, 2010
i configured DSL Connection using my broadband username & Password and while Connecting to net i used to click that Dsl connection to connect to net......but my connection does not last for long...it gets disconnected and shows wired connection s connected....so i have to click again(DSL Connection) to connect to net...... sometimes even i click for two or three times ....it wont connect...
i also need any other ways to configure DSL Connection in Command line ......do i need to configure PPPOE with username and password in command line using (sudo ifconfig pppoeconf)
View 2 Replies
View Related
Jan 30, 2011
As i describe the thread,i won't be able to configure my NIC to connect to internet which is basically done by just running system-config-network in shell to configure xDSL connection.But instead of system-config-network it contains system-config-network-tui which is used for ISDN connection.And after running system-config-network as well as system-config-network-tui it shows the same output which is in attach file
After some google search it shows that there is bug with system-config-network and it is fixed in system-config-network-1.6.0.el6.2-1.el6 but i wont be able to find it.
As i m not subscribed to RHN
View 9 Replies
View Related
Nov 24, 2010
My daughter just broke her laptop screen. I can order another LCD - no problem, but until then she wants to use an external monitor. With Windows, this used to be no big deal, because I would hook up a monitor, hit a key combo on the keyboard, and everything would come up on the other monitor.I know how to do this using the GUI, but unfortunately, I can only see about a 2 inch strip at the top of her computer. I can see the gnome menu bar, and when I go into the Nvidia configuration, I can't make out anything below the tops of the two monitors it detects. (I was able to get it to detect both displays, but I can't see to press the "configure" button.)What I need to do, is configure the new monitor from the command line using the two inches of visible monitor that I have at the top of her broken LCD.
View 8 Replies
View Related
Jan 3, 2011
Is there a way I can configure gnome-panel with the command line? I want to be able to write a shell script to switch between my AWN desktop setup and my gnome-panel one.
Also (this is less important) is there an easy way to switch between Gnome and KDE? I would assume no, but if there is that would be cool.
View 4 Replies
View Related
Mar 24, 2011
I had to uninstall a proprietary ATI driver because it wrecked my X server. Apparently I removed the wrong package, because now the X server won't even start, even with the "nomodeset" flag.
QUESTION 1.How can I configure WiFi on the command line with NetworkManager or ifup, whichever is easier?
QUESTION 2.Which packages do I need to download to restore the X server?
View 9 Replies
View Related
Jan 5, 2011
I was laughing about klackenfus's post with the ancient RH install, and then work has me dig up an old server that has been out of use for some time. It has some proprietary binaries installed that intentionally tries to hide files to prevent copying (and we are no longer paying for support or have install binaries), so a clean install is not preferable.
Basically it has been out of commission for so long, that the apt-get upgrade DL is larger than the /var partition (apt caches to /var/cache/apt/archives).
I can upgrade the bigger packages manually until I get under the threshold, but then I learn nothing new. So I'm curious if I can redirect the cache of apt to a specified folder either on the command line or via a config setting?
View 2 Replies
View Related
Dec 13, 2010
I'd like to know how to configure Fedora 14 so my VPN connects and reconnects itself automatically, since the "connect automatically" thing I checked in the network manager doesn't work.Is there a way to make sure that everything uses the VPN, so when for some reason the VPN is disconnected the applications will wait for the VPN to reconnect itself instead of switching to the regular network ?Also since it's pptp VPN I tried to disable Ipv6 but I don't know how to check if I successfully did it, can you guys give me the command line to check that ?
View 2 Replies
View Related
Jan 17, 2010
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies
View Related
Feb 28, 2011
i tried to run up2date from command line by using: up2date-config,but get the error message as: bash: /usr/bin/rhn_register: No such file or directory
View 1 Replies
View Related
Jul 1, 2010
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
View 5 Replies
View Related
May 3, 2011
I installed openSUSE today using a network installer cd, opting for the Xfce environment. Everything went smooth with the installer, but I have some issues with the network. After the fresh install, nm-applet did not start. I got the following error:
Code:
nm-applet
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:14981): WARNING **: Fallback icon 'gtk-dialog-error' missing: (0) Icon 'gtk-dialog-error' not present in theme
**
ERROR:applet.c:2800:nma_icons_reload: assertion failed: (applet->fallback_icon) Aborted I don't know if the problem was with the applet or with the daemon. Fortunately I used Archlinux for a quite long time and I know how to connect to WPA2 encrypted wireless network from command line, so I was able to connect to the internet and do an upgrade - everything went just smooth and fine again.
After the update and restart, I found the nm-applet icon in the system tray. And here comes the second problem: I can connect with the nm-applet, but the connection does lasts only for about 10 seconds. So practically I can't use the net this way either. Ok, no problem, I fired up Yast, disabled the networkmanager and choose to start my network with the traditional method. I entered the required stuff from my wireless card ( ESSID and passwd ), set to activate at boot time and reboot.....
View 4 Replies
View Related
Aug 18, 2010
I cannot connect to the internet on the command line. Things like firefox or chrome browser work fine. But on the command line programs like 'links' fail to work. This is on a machine behind a proxy, I have the http_proxy and https_proxy environment variables set properly.
View 5 Replies
View Related
May 14, 2009
For some reason Ubuntu 8.04 doesn't save my college network settings, so I have to connect manually each time. This is what I physically have to do to connect:
1) Click on network manager icon in the notification area
2) Click "connect to other wireless network"
3) Type in "NETWORK_NAME" into network name area field
4) Select WPA enterprise under wireless security
5) Type in "USERNAME" into username field
6) Type in "PASSWORD" into password field
So what I would like to know: is there any command line equivalent for the above six steps? I would like to write a script which will carry out the above six steps for me automatically, using the parameters NETWORK_NAME, USERNAME and PASSWORD.
View 7 Replies
View Related
