Fedora :: Wireshark Missing Interface From List?
Dec 2, 2010
I'm loving FC14, but I just find out that Wireshark is not working, as it was on FC13.Here is what's happening..... When running the application I get prompt for authentication, that was fine under FC13. I used to type my super user password, andthat was it. On FC14 I get nothing.Now when I skip the authentication the Wireshark Gui comes up, but it has no interfaces showing on my list.What I have!:
wireshark-gnome-1.4.1-2.fc14.i686
wireshark-1.4.1-2.fc14.i686
wireshark-devel-1.4.1-2.fc14.i686
[code]....
View 3 Replies
ADVERTISEMENT
Jul 10, 2011
When I try to install the wireshark-gnome interface I get a notice about needing two dependencies. One is portaudio and the other is the jack-audio-connection-kit. Seems like kind of odd dependencies for wireshark. Do wireshark really need them? VoIP related maybe?
View 6 Replies
View Related
Jul 19, 2010
Just noticed that the buttons for each open application, normally arrayed across the bottom menu bar, are totally missing. They're just not their, either for open or hidden apps!All I can think of that I've done since the new install is I did download gconf-editor and possibly opened it once, but I made no intentional changes.
View 2 Replies
View Related
Mar 28, 2011
I have some issues while installing wireshark-gnome. see the below logs. I am using Fedora 13. I am seeing some transaction error when I issue "yum install wireshark-gnome".
[root@Fedora-ipv6 ~]# yum install wireshark-gnome
Loaded plugins: fastestmirror, presto, refresh-packagekit
Loading mirror speeds from cached hostfile
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]...
View 1 Replies
View Related
Sep 15, 2010
I freshly installed Wireshark on my PC by running 'yum install wireshark'. Installation succeeded. But then I cannot find how to start Wireshark. I looked already in different folders by using locate ( and updatedb) but I cannot find the place where I should invoke the program. How I can start my program?
View 2 Replies
View Related
May 12, 2010
I run into this error while trying to install wireshark. I am sure there is a quick fix. I can see the files are different I just don't know how to resolve the error.
Test Transaction Errors: file /usr/lib/python2.6/site-packages/wireshark_be.pyc from install of wireshark-1.2.6-2.fc12.x86_64 conflicts with file from package wireshark-1.2.6-2.fc12.i686
file /usr/lib/python2.6/site-packages/wireshark_be.pyo from install of wireshark-1.2.6-2.fc12.x86_64 conflicts with file from package wireshark-1.2.6-2.fc12.i686
file /usr/lib/python2.6/site-packages/wireshark_gen.pyc from install of wireshark-1.2.6-2.fc12.x86_64 conflicts with file from package wireshark-1.2.6-2.fc12.i686
file /usr/lib/python2.6/site-packages/wireshark_gen.pyo from install of wireshark-1.2.6-2.fc12.x86_64 conflicts with file from package wireshark-1.2.6-2.fc12.i686
View 2 Replies
View Related
Jun 17, 2010
I can't find wireshark rpm package for RHEL5.4, How Can I install a wireshark with graphics on RHEL 5.4
View 1 Replies
View Related
Mar 16, 2011
I have already tried reloading the drivers, restarting the interface (which is missing) and every other solution I found on this forum (well... not exactly all of them but many of them) uname -a gives Linux hostname 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
[Code]....
View 3 Replies
View Related
May 28, 2010
downloaded the latest firefox and put it in /opt, it runs ok but the interface is missing icons, like the back and forward buttons, refresh, the x on the tabs, the + for a new tab, and others. iceweasel is fine. anyone seen this or know where or how to fix it?
View 4 Replies
View Related
Oct 28, 2010
I just setup a SuSE 11.3/64 server and I am trying to setup pptpd for a vpn. I noticed thatg the ppp0 (or any pppx) interface is non-exoisting and I think that that is the problem why my gre packages are not being sent by pptpd (as I have checked all other options). I have tcp port 1723, and protocol port 47 (gre) open on the firewall (SuSEfirewall2). I have traced the responses using tcpdump and only when the server sends gre to the remote client, the client never receives it (the 1723 connection is established). I checked the old server (SuSE 10.2) that worked the vpn fine, and the only thing missing on 11.3 is ppp0. All other hardware (routers, etc.) are the same. I suspect that pptpd tries to use ppp0 and the interface is non-existing. I can remotely ssh to the server, dns works, samba works, everything else works. Is it something I am missing? How do I create if ppp0 and link it to eth3, the internet gateway?
As always, a windoze tech crashed the old server and I had to setup the new one in a hurry, just before going on vacation, and people want this done by yesterday? They paid $$$$ to the windoze tech (who said Linux is obsolete) even after he almost brought the company down!
View 2 Replies
View Related
Jul 8, 2011
I am trying to use Wireshark and on startup the program pops up a window saying:
Couldn't run /usr/sbin/dumpcap in child process: Permission denied
Are you member of 'wireshark' group? Try running 'usermod -a -G wireshark <username>' as root.
I ran the usermod command to add my account in the group and checked it
Code:
less /etc/group
wireshark:x:490:myaccount
but the same error message pops up.
View 3 Replies
View Related
May 4, 2010
Yesterday I installed debian squeeze and inside appearance preferences there are: theme, background and fonts tabs but the interface tab is missing. What do I need to install in order to have this missing tab?
View 2 Replies
View Related
Apr 21, 2010
I tried out the 10.04 beta in VirtualBox, and the tab for Interface in Appearance Settings was gone. This tab allowed you to edit the appearance of Toolbars in Ubuntu. You could edit whether Icons showed up in the toolbar buttons and whether Text shows up beside it. This is kind of a minor annoyance for me; is there any way to edit this option outside of the appearance settings? I'm sure there is (like editing some config file or GConf), but I'm not sure where.
View 5 Replies
View Related
Oct 12, 2010
I'm using handbrake to encode some dvd's and am trying to use the autoshutdown feature. It does not work.However, handbrake does not seem at fault here. When I check in qdbusviewer, there is indeed no shutdown method in the org.freedesktop.PowerManagement interface. This does not seem normal, although I have the same problem on 2 suse 11.3 boxes.Through this post, I started fiddling with policykit settings, but it doesn't change anything.Does anyone know a solution to this problem? Do you have these canShutdown/shutdown methods?
View 2 Replies
View Related
Aug 27, 2011
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router.
I'm able to connect to the Internet using this same cable using a Windows machine, so there's something wrong with the way Linux is configured.
How do I got about figuring out what the problem is and solving it?
Here are my network settings on Linux:
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
[Code].....
It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine. (That's how I'm posting this after all!)
View 3 Replies
View Related
Mar 20, 2016
My Lenovo laptop has an Intel Pro 4965 Wifi adapter,here is the "lspci" detection:
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
So installed the needed "firmware-iwlwifi" kernel module, which is a correct kernel module for this adapter.
Then "modprobe -a iwlwifi"........no complaints !
However,
#iwconfig wlan0
wlan0 No such device
and
# lsmod |grep iwlwifi
iwlwifi 87219 0
cfg80211 350041 4 iwl4965,iwlwifi,iwlegacy,mac80211
The wired ethernet is working fine
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1e:37:82:ac:72
inet addr:192.168.1.16 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:37ff:fe82:ac72/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code] ....
when I go to "Preferences" "Network Connection" ' "Add" "WI-FI" "Create" "Device MAC Address " box is empty.......no Wi-Fi adapter detected !!!
View 7 Replies
View Related
Nov 17, 2010
I am trying to connect a Brother HL-2230 printer over CUPS on an Ubuntu Lucid box. However, when I attempt to add the printer using the web interface (localhost:631/admin) the printer is missing from the page that asks me to choose the driver; however, many other Brother and HL-series printers are listed. My question is, how can I get my printer to appear on the driver list (and yes, I installed the manufacturer's CUPS and LPR drivers)?
View 7 Replies
View Related
Sep 3, 2010
i accidently got rid of the panel on top, so i deleted the bottom one, and started a new one on the bottom. now whenever i open a program, there used to be a "list" of all the open program/windows on the bottom, now that is goneso once i minimize a program, the only way for me to get back to it is to press alt+tab.
View 2 Replies
View Related
Dec 8, 2010
Here is the output of bootscript,
Code:
#
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
#
[code].....
View 9 Replies
View Related
May 24, 2011
When I start evolution from the terminal I get this: (evolution:3265): GLib-GObject-CRITICAL **: Object class EMFolderTree doesn't implement property 'paste-target-list' from interface 'ESelectable' The program still starts though. I am fairly new to Ubuntu.
View 2 Replies
View Related
Dec 26, 2015
Yesterday I used the Live DVD's Rescue Mode to re-install Grub(2) in the MBR of my hard drive. Today, I am surprised to see a very different /etc/apt/sources.list file that only has one line, as follows:
Code: Select alldeb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official amd64 DVD Binary-1 20150906-11:13]/ jessie contrib main
View 10 Replies
View Related
Sep 15, 2010
Since certainly half a year I have to add the vga=0x317 parametere at the end of the root parameter in the menu.lst file after each upgrade of the kernel and also recently after upgrading from 11.1 to 11.3. Without this, the splash screen is not shown on my HP Pavilion laptop.
View 5 Replies
View Related
May 10, 2010
I've Vaio P39 with Karmic 9.10(2.6.31.21). Everything is ok excluding the WWAN. It just is missing in available networks list to connect (LAN and WiFi are ok).
Searching gives that WWAN adapter doesn't start at cold reboot and it's proposed to use Win7 to switching WWAN on and then restart. But it looks like - must have Win7 only to switching WWAN on...This kind of solution for some Vaio laptops
Code:
Probably bad searching from my side but I've no solution yet. Does it exist at all?
View 2 Replies
View Related
Apr 22, 2011
in unity, I would like to change the position of the "system settings" entry in the menu list: from the last entry, as it is now, to the top one, before the "lock scree" option.
View 2 Replies
View Related
Apr 2, 2010
I'm testing out 10.04 on one of my partitions, and I love it. I have been using it exclusively for a while now, I have not logged into Windows since! Really don't care about windows anymore!However, yesterday I went to boot into windows... and I noticed the option to choose it is missing from my list! Maybe I'm just not getting to the correct list? The list I get shows like 5 different modes and versions of Ubuntu and something called Windows Recovery (which does nothing), but that's it.
View 9 Replies
View Related
Nov 11, 2010
I'm looking to have an 'access control list' tab of file/folder properties in Nautilus.
I have eiciel installed and i thut thats supposed to take care of it. What am i missing to get it to look like the pic?
View 1 Replies
View Related
Feb 17, 2010
I understand there is a file that stores the repositories' information, but I can't find it!Is there a way I can create a list of what applications have been installed?The idea is that if I am running a backup, finding a way to save the repository list and applications installed so if I am upgrading, or fixing a borked system by re-installing Fedora, I could copy the repo list back, and run the applications list like ode:yum install <cat apps.txt?> and get all of the applications I've installed via Yum without having to remember them all?Is there anything else, outside of /home, I should look at backing up? SELinux settings?
View 6 Replies
View Related
Dec 1, 2010
Whenever I try to install or remove a program, I get the following error
Code:
dpkg: warning: files list file for package `libavahi-common-data' missing, assuming package has no files currently installed.
dpkg: warning: files list file for package `libgtk2.0-common' missing, assuming package has no files currently installed.
dpkg: warning: files list file for package `libxres1' missing, assuming package has no files currently installed. (Reading database ... 55%dpkg: unrecoverable fatal error, aborting: files list file for package 'ubuntu-mono' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2)
View 4 Replies
View Related
Oct 11, 2010
I love Gnome Do, particularly it's "docky" interface. However, after installing Ubuntu 10.10 I realized that the "Docky" theme was not available anymore. I cecked the Gnome Do website but it seems that docky is still supported. Am I missing something? PS: I don't want to install Docky. The dock is OK, but I like the Gnome Do commands to be integrated with it.
View 9 Replies
View Related
Feb 23, 2010
I have recently taken delivery of a Dell Inspiron mini netbook with Ubuntu on, and I am new-fangled .install updates, I clicked the (orange down-arrow) button, and it compalined "E: /var/cache/apt/archives/linux-image-2.6.24-22-lpia_2.6.24-22.45netbook9_lpia.deb: files list file for package `libxcb-shape0' is missing final newline"
View 2 Replies
View Related
