Just noticed that the buttons for each open application, normally arrayed across the bottom menu bar, are totally missing. They're just not their, either for open or hidden apps!All I can think of that I've done since the new install is I did download gconf-editor and possibly opened it once, but I made no intentional changes.
View 2 Replies
After resolving the issue with updating Fedora, I have a new issue and it that my clock (as well as the network status icon, etc) and apps tray have literally disappeared (as shown by the provided screen shot). The only way I can can switch applications is with alt+tab. Sorry if this may sound dumb if it is a simple fix, but I have looked around in System>Preferences/Administration and could not find anything.
View 6 Replies View RelatedI'm testing out 10.04 on one of my partitions, and I love it. I have been using it exclusively for a while now, I have not logged into Windows since! Really don't care about windows anymore!However, yesterday I went to boot into windows... and I noticed the option to choose it is missing from my list! Maybe I'm just not getting to the correct list? The list I get shows like 5 different modes and versions of Ubuntu and something called Windows Recovery (which does nothing), but that's it.
View 9 Replies View RelatedI am missing the brunch "/apps/nautilus" in gconf in Fedora 15. Is there any other way how to control Nautilus settings (e.g. set nautilus to show "advanced permissions" in file properties) ?
View 2 Replies View RelatedI'm loving FC14, but I just find out that Wireshark is not working, as it was on FC13.Here is what's happening..... When running the application I get prompt for authentication, that was fine under FC13. I used to type my super user password, andthat was it. On FC14 I get nothing.Now when I skip the authentication the Wireshark Gui comes up, but it has no interfaces showing on my list.What I have!:
wireshark-gnome-1.4.1-2.fc14.i686
wireshark-1.4.1-2.fc14.i686
wireshark-devel-1.4.1-2.fc14.i686
[code]....
Is there a way to list all the apps I have installed?
View 9 Replies View Relatedin light of the current kernel flaw being circulated:[URL]...and the solution being proposed here:[URL].. How do I know if I have any 32 bit binaries running on my machine: Ubuntu: 10.04 64 bit
I generally always install most of my apps through the repo's but I **may** have installed some apps from source code or other methods. So how can I list any 32 bit binaries running on my machine before implementing the solution cited in the second link?
I downloaded rpm so far but my only problem is I don't know what apps there are for it?
View 14 Replies View RelatedI downloaded a WHOLE bunch of linux programs, but I can't open them. How do I open programs such as mupen64 plus?
View 9 Replies View Relatedget a list of most used apps at the bottom of the application menu. Also documents, why not.
View 8 Replies View RelatedHow to make a backup of installed applications?
In the answer there was some program which would create a file listing all installed apps and store it in /home. On updating the OS or re-installing, the file would be used to re-install all apps listed.
How can I generate a list of all the apps I have installed in my Ubuntu installation?
View 3 Replies View RelatedIs there a list of apps in ubuntu that can be controlled by a remote control?
View 1 Replies View RelatedI've been trying to add applications to my "Startup Applications" menu. Most of the time, they "stick," but sometimes simply disappear, either immediately or after a variable length of time (sometimes more or less immediately, sometimes after several restarts, or anywhere in between). I've noticed that, when they stop booting, their entry disappears from ~/.config/autostart, but changing permissions on the affected files (e.g., removing write access) doesn't seem to help.
Any suggestions? Re-adding the same things over and over gets frustrating after a while, and I can't figure out why these entries are disappearing.Currently running Ubuntu 9.10 on an HP Pavilion dv6000 with an Intel Centrino Core Duo processor and 2 GB of RAM.
I was having problems with using sound in 9.04, and decided that I needed to upgrade to 10.04
So, did a bit of cleaning up, before doing a backup to another disk. In the process of cleaning up, I removed, what I thought was "just" sqlite, but it removed firefox, kmail, nautilus, networking, internet, just about all menus, the whole system is shot.
Fortunately, I use simple backup, and was able to 'see' that a full backup was done yesterday, and an incremental just before my 'clean up'. The sbackup only does /home , and system data held in /etc,/usr/local and /var , so not ALL of the system is in the tar files.
Now when I boot into Ubuntu, it just goes to a command prompt. To copy those .tar files to another drive on the same computer, I need to run nautilus or similar, but can't, as no internet. The same with sbackup, basically it won't run anything. I did try the 'recovery option in GRUB, still no go.
I do have Beyond compare on the Ubuntu box, and I _think_ it may be ok to run, and possibly copy those .tar files across. As it won't even do a 'mount' either, I can't copy to CD, or load a USB stick, etc, etc.
I'm 99% certain that the .TAR files will be all that I need. They have all the data, and all the config. type files.
Just wondering if there is any method to get Ubuntu 9.04 up and going again, like a restore point I guess. But, every time I tried using apt-get, it wanted the internet, which is not working on Ubuntu (fortunately I have XP on this same computer, and can connect).
The XP computer can't access the Ubuntu HDD, but Ubuntu can access the XP HDD, and copy to it, but ONLY if I can mount the XP drive first.
So, I guess even if I could do a mount of that XP HDD from Ubuntu, that will be a start.
i installed "display calibrator" from the distros and afterwards i cant find it under Applications (graphics/ sound&audio/system tools...), so i went to System > Preferences > Main Menu and it isnt listed anywhere.
View 1 Replies View RelatedThe tray icons for many apps (especially QT apps) are missing! Important apps that become unusable after being minimized to tray - due to having no tray icon:
* Pidgin
* KeePass
* JungleDisk
Anyone know if this can be fixed? A workaround? An explanation? Is this a known (rather extremely serious I should say) bug?
I'm trying to install kweather in 11.2. I have downloaded and installed. I can find it in usr/bin and usr/lib but I can't add an application as in 11 or 11.1. It doesn't show up in the list of apps. It's there but I can't get it on the desktop.
View 14 Replies View RelatedAll qt4 apps tray icons are missing. Debian decided to drop sni-qt support and wmsystemtray is actually piece of shit. Also I can't even use ubuntu version of sni-qt, because it also needs to have patched version of qt4, but debian refused to include that patches. What should I do to make skype icon visible in kde5 tray?
View 14 Replies View RelatedHaving used Lucid from day one without any problems, lately there have been a few niggles, first the Trash Can disappeared, since been restored, now my Clock preferences on the top panel has gone (You know, the Time, Weather, Location).And as I write this the off / on button has gone walkabout.
View 2 Replies View RelatedJust put 11.04 on my core2 machine (3 GB ram, Nvidia 250 gts) and graphics just aren't right. Installed the recommended Nvidia driver, did updates. Where is my X to close apps? used to be at top right of running apps. Can't drag apps around by the top bar anymore. Enabled Desktop switcher and it doesn't work. Won't switch desktops. Are these bugs I'm experiencing or what?
View 4 Replies View Related I have installed f14 in my laptop. The hard disk partitions are as follows
Code:
# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code].....
I want to move entirely from windows to linux. My college has ubuntu running on the labs. But i have a thing fr Fedora. I want to install fedora & run win32 apps via wine. But just in case some apps need strictly windoze i was wondering about using BART PE as a minimal windows application use. Does BARTPE run all win32 apps like CAD, dialup client, burn iso, install on a small harddisk,boot up with linux?
View 2 Replies View RelatedI just had to do a reinstall of 11.3 when plasma refused to run. Now I'm noticing that applications are missing from (pacman) repo, but when I browse the repo with firefox, the rpms are there, they're just not being found by a yast search... Both mplayer and kdelnive are not found by yast. There are probably others...
View 5 Replies View RelatedI'm having a problem building some applications (e.g. Qsynth and FreeCAD) with sbopkg relating to an unfound library named "jscore". I've been keeping my system up to date with slackware64-current.Google searches have turned up very little about this library. There is a sourceforge page that has no files and seems to be related to a google hosted script jsCore.js... but I don't think that's what's missing here. I've come across some vague references to this jscore library being part of webkit. Can anyone verify this? I updated my webkit library itself and found no apparent results. Perhaps jscore was removed in an update to Qt (both of the example applications mentioned above link to Qt) as it seems to have it's own webkit library, libQtWebKit.
View 5 Replies View RelatedI recently decided to do a dual boot computer running windows 7 and fedora 12. After running disc management in windows 7 and shrinking my main volume down so there was enough unallocated room to install fedora I rebooted and ran the fedora live cd. I then chose the option to install fedora on unused hard drive space.
After all of this I booted up fedora and everything ran great and I have access to all my windows files when I mount that drive. I restarted my computer and tried to boot into windows 7 and ended up with the error "bootmgr is missing press ctrl alt del to restart". Is there any way to recover from this and use windows 7 again?
In F11, I could configure windows to gain focus when the mouse hovers over them ... it was possible to finetune the response in terms of seconds. I dont find the menu item for this function any more in F12 (System -> Preferences ->?) Which package added that functionality and is there a version for F12? I really miss it
just noticed that the windows are already set to respond that way (by default) only that the title bars don't indicate a change in focus.
I have installed Fedora 15 on a Acer Aspire one computer laptop. I have some missing windows for Network settings windows.First issue:When setting wep or wpa or wapa2 there is no windows to type in the passphase and key so the laptop can connect to the wireless netgear wireless router.Second issue:Once a password is typed in the one line access there is no way one can reset what has been typed in. Gassp! Check this out....one can highlite wireless and options does not light up. When one highlite wired options lightup and you can click on the tab 801.11something like that for wireless but this is for the wired not for wireless.....I know because I have tried it and had to reinstall fedora software because I could not remove the password and user name
View 2 Replies View RelatedI am having a problem trying to install KindleForPc with wine in Fedora 12. Wine installs and runs but is missing a class needed by Kindle. Notepad, regedit, etc run but there is a problem when I run the Kindle Installer.Attempting to install Kindle I run
Code:
wine KindleForPc-installer.exe it runs to completion two windows appears they have a windows look, as it intiializes. Then it returns to the command line prompt. Shortly after it returns to the command line I get a series of error messages. Perhaps the installer finishes and then tries to start Kindle. I have typed their essence below:
Code:
fixme:system:SetProcessDPIAware stub!
class {6e4feb12-510a-4d40-9304-1da10ae9147c} not registered
CLSCTX_REMOTE_SERVER not suppported
no class server could be created for context 0x17
Kindle does not show up in the configuration utility and when I try to run it from the command line it complains that some classes are not registered. My understanding is that yum has a list of the component packages required by wine, and the person who prepared the list thought it had loaded all that was needed for wine, but it did not include the package that has the classes that I need. On the web there are a number of postings that tell how well Kindle works under Linux, and none of them deals with doing anything more than installing wine. I assume that in those cases the install procedure loaded the classes I need. My hope is that someone with more knowledge than I can give me a pointer on how to proceed.
For some reason, my latest Fedora 11 install + yum update does not seem to have the option to connect to a Windows Share in the drop down list when I select Connect to Share. I'm using gnome.Does anyone have any ideas which packages provide this functionality.
View 2 Replies View Related
