Ubuntu Networking :: WWAN Missing In Available Networks List To Connect - Vaio P
May 10, 2010
I've Vaio P39 with Karmic 9.10(2.6.31.21). Everything is ok excluding the WWAN. It just is missing in available networks list to connect (LAN and WiFi are ok).
Searching gives that WWAN adapter doesn't start at cold reboot and it's proposed to use Win7 to switching WWAN on and then restart. But it looks like - must have Win7 only to switching WWAN on...This kind of solution for some Vaio laptops
Code:
Probably bad searching from my side but I've no solution yet. Does it exist at all?
I have F15 and use networkmanager to connect to wifi networks. How do I edit the list of saved wireless networks that it tries to automatically connect to? I need to get rid of some networks that it is always trying to connect to.
I was on a car trip earlier, but we were stuck in traffic. The stop-go stop-go kind of BS. I pulled out my 9.10 laptop and figured I'd scan for wifi networks and see how good America was at securing their networks. (I work in IT support so it's one of those things I preach to no end yet people rarely listen).
I was using wifi radar, and picked up a truckload of networks every time we'd stop. But something didn't sit well with me. When I click on the network manager icon in the top gnome panel to see what networks were available, it never seemed to refresh.
Example - the first 5 networks I saw were 1, 2, 3, 4, 5. We would stop-go more and more and miles later when I'd see more networks in the area show up in wifi radar, yet hit my network manager, I'd STILL see networks 1, 2, 3, 4, 5 and not 30, 31, 32, 33, etc like I expected.
What kind of refresh time or cache or whatever does network manager have? I just didn't understand why I was seeing the original networks from 15 minutes/miles ago and it never seemed to update.
Is there a way I can refresh the list of available wireless networks in the network manager applet? It works correctly when I've just booted but doesn't after I resume after suspending. There's just a message like "wireless networks not available".
I can assure you that the wi-fi is not disabled using a button (my laptop doesn't have such a button), "Fn" key combination or in any other way and the network doesn't go down when I need it.
does it still support the madwifi driver. i have tried to compile madwifi 0.94 that i got from svn and from sourceforge and it was succes, but the problem is it doesnt work. when i compile the source from subversion, i get the ath0 on iwconfig command but i can't get any wireless network on list of network. if i use the one from sourceforge, the iwconfig list even doesnt contain any ath*
I have seen tutorials on setting up a secured firewall/router/gateway using ubuntu server as the platform. However, I am wondering if anyone has had experience with using an aircard (wireless broadband card via usb) to set up a router.
Which card do you recommend? Any precautions? Any specific code already written to automatically recognize mobile broadband cards and restart the connection if it goes stale?
I have an Option GE0201 UMTS card (also known as KPN MIK 720, Globetrotter Express 7.2 HSUPA, Qualcomm 3g CDMA, etc.).When I install it in Fedora 13, it displays the onboard flash drive as a CD player.After some research I know this CD drive is called ZeroCD and works in Windows by switching a driver mode, so either the device is visible as a CD to install the accompanying software and after that install as a UMTS modem.I have beeen researching options like USB_Modeswitch which should solve this issue, but most documentation I find is aimed at either Ubuntu or at developers (which I am not).
I have an hp dm1z and ubuntu 10.10 64bit. After I suspend (close the lid) and wake it up (open the lid) at a different location with a network connection (wired or wireless), my system always fails to connect. I need to reboot and then it sees the network and connects fine. I have tried /etc/inet.d/networking restart, but nothing changes. The only exception to this rule are two networks that have WPA security settings and are stored. I can always switch between those two. I have tried ifconfig eth0 up & down and restart networking. I have also tried to connect manually (dhclient) and no success. None of these work. I am including the output of lshw -C network.
I have an MSI Wind U100 netbook running Maverick, and it has a Realtek RTL8187SE Wireless controller according to lshw. My computer can "see" some wireless networks where they are present, meaning when I click on the little network icon at the top of my screen it shows the available networks. But when I click on them to connect, the icon does its little "connecting" motion, but I never receive any message saying "Connected" and when I open Firefox and try to browse to google.com, it says "Server not found"
I have an ethernet card connected to my LAN and a USB cell modem internet connection. I am running ubuntu 10.10. The problem is this: I can use either network, but only am connected to one of them. If I connect to both at the same time my speed drops to zero.f I disconnect one, the other starts working. I have done a lot of searching and reading, but it looks like I don't know how to find what I am looking for.My LAN was setup as 3 WinXP computers peer to peer. One of those computers was replaced by this one that I am having trouble with (computer A). Another one was replaced by one that is not yet on the network (computer C).Computer B dual boots Win XP and ubuntu 10.4. Mostly it ns xp for Quickbooks and BobCAD, also it is connected to the printer. My router is setup for DHCP
I have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.
Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?
We have two networks,one is 10.0.0.* with mask 255.255.255.0 & the other 20.0.0.* with mask 255.255.255.0 and one linux(RHEL5) PC with two network interface eth0,eth1.(configured as Router) eth0 is 10.0.0.1 and eth1 is 20.0.0.1 we have enabled IP_Forward using "sysctl w net.ipv4.ip_forward=1" cat /proc/sys/net/ipv4/ip_forward is 1 but unable to ping from one network to other network.
two networks are connected to Linux PC.(10.0.0.1 & 20.0.0.1)
still wht configuration required to establish the connection between two networks using LINUX PC.
from router(linux PC) both network PC's are pinging but not from one network to other network.
I recently ubgraded to ubuntu 9.10 from 9.04, but I had the same problem there. I can see the secure connections, but when I try to connect to them, it tries to connect, works at it for about a minute, and then asks for the password again. This just started a week ago or so. I am new with ubuntu, so while I know that there are terminal outputs I should probably post, I don't know which ones.
1) I connect to the internet on a wireless router from my isp.
2) I use an older router for my media server (pc) to my ps3. The router given to me from my isp is the only one I can use to connect to the internet, yet it has the worst UPnP support (ie: none).
So with this current setup, I have to disconnect from the the wired network to be able to access the internet. So how can I access the internet while still connected to the wired network?
I have a machine running Xubuntu [2.6.22-14-generic]. I have been trying to get this machine connected to wireless for ages, and I'm having another stab at it. So far I have install ndiswrapper and loaded the driver for a Linksys wireless adapter. The output of 'ndiswrapper -l' reports:
So as far as my newbie knowledge goes, I believe that step to be completed, correct?When I turn on the machine is type in
Code:
sudo sh modprobe ndiswrapper
to get the card running to where it will appear in the iwconfig dialog.The commands 'iwlist wlan0 scan' will list all the wireless networks around me, but I have been un-able to connect to any network, even unencrypted ones. I have tried to connect both through Wicd and command-line to no avail. For command-line I have used:
Code:
sudo ifconfig wlan0 down sudo dhclient -r wlan0 sudo ifconfig wlan0 up
[code]....
With the final 'dhclient wlan0' commands, the following is returned:
Code:
There is already a pid file /var/run/dhclient.pid with pid 134519120 Internet Systems Consortium DHCP Client V3.0.5 Copyright 2004-2006 Internet Systems Consortium
[code].....
I have attempted to go ahead a step further and connect to an encrypted wireless network, however, I receive the same message, as well as another error message upon trying to enter the key, with the following code:
Code:
iwconfig wlan0 key s:"thekey"
Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument.
I have an Atheros AR242x card. It can see my wireless network (WPA2). When i attempt to connect to the network it asks for the WPA2 passphrase. After entering the password it begins connecting but hangs up for about 3 minutes before saying wireless disconnected. The wireless worked for one day on a fresh install (Ubuntu 10.04)and then started doing this.
I have a WLAN Driver Azure Wave AW-NU222 Wireless LAN Card in my Medion computer.
After installing Ubuntu it seems to detect the wireless networks in my area. However, when I try to connect to my network, it tries for several minutes and then times out with no error message. I have set up the credentials and also tried removing the encryption (WPA-PSK) from the network itself, but it still doesn't connect.
Connect via an Ethernet cable is fine, and I know that the network is good because I can connect via my Windows Laptop and various other wireless devices.
I suspect it's due to drivers, but I'm having trouble downloading a driver which I can try and install using Ndiswrapper. The Medion website just a windows executable when I try and download the driver specific to my machine when I really need the .inf file.
Here is a situation I have never come across (though I have only been using linux since 2004).I am running ubuntu 10.04 and using Wicd Network Manager.I can connect to my WPA encrypted home network, but if I go to my coffee shop to use their unencrypted wifi - I cannot.Even using the terminal. I think it is the way the device sees the network - but I don't know how to fix it.I have a screenshot with wicd here:And one with connecting to the essid here:Afterwhich, dhclient was unable to obtain an ipaddress - just like wicd above.
My iphone connected to this network easily without encryption or needing to use the browser to authenticate, etc.Any ideas on how to fix this?Specs:Samsung NC10lspci:
I have a HP Mini1000 and recently switched over to Ubuntu. I followed the directions found here:[URL] However, I still cannot connect to wireless networks though my card seems to be scanning for them and finding them. I have tried connecting to open networks and ones that require authentication.
I have been using Ubuntu for quite a long time and I never got around fixing this particular wireless problem. I have tried Network Manager as well as Wicd. I am never able to connect to a secure network (WPA). When I use Network Manager, it just tries for a long time and gives up. As for WiCD, it again tries for a long time and finally says "Bad Password". Of course, the passkey is correct. When I connect to an unsecured network, it goes through just fine. I have a Dell Inspiron 1545 which uses a Broadcom 43xx Driver.
I've managed to install my WUSB600N on 10.10 (which was NOT easy!!) and I can see all my local wireless networks, but I can't connect - it attempts to connect then disconnects after what I guess is timing out.I know that you can place these cards in broadcast mode (I think), where you can see networks but not connect. Considering that to get this card working I had to attempt about four different sets of instructions to get this far, could I have placed the card in a broadcast mode? I've been at this for about three days, and unless I go out an buy another network card (I'm currently connected using it through windows) then I'm going to have to give up on Linux, which I really don't want to
I have an Eee PC 1015PEM with Ubuntu 10.10, I believe the wireless card is an rt3090 (though sometimes I see references to rt2860).I had problems getting this to connect to any wireless network originally but eventually was able to fix this by blacklisting a number of modules.However I am still unable to connect to hidden networks and have not been able to find a solution.
Got Ubuntu 11.4 installed on my Lenovo Thinkpad X220.Except very very rare cases i'm not able to establish awlan connection.Scanning is possible at all times, monitor mode works as well.Network Controler (lspci)
So I was the one who couldn't get their ethernet port to function properly. Most likely, this was the result of bad hardware since none of the community's suggestions for software fixes did anything. I believe this is probably true.Indeed, when I bought a cheap $10 wireless USB dongle, it immediately worked better than all the previous things. It detected networks, displayed network strength and even allowed me to attempt login.
The only problem now seems to be that it cannot login. I've rechecked the password countless times, but it just shows the 'connecting to wireless' animation for a minute or two and then poops out and says, 'disconnected'.I assume if everything is getting me this far, the driver is not the problem with the device. Is this a safe assumption?
I have my main network with internet and DHCP which is on 192.168.x.x with a router.Now I have set up an Ubuntu file server and i want it on a separate home network with static ip addresses range of 10.x.x.x. and it is also connected torouter.So i will have two networks, one private static with no direct internet access, and the other with internet and DHCP. I want to know how I would "bridge" these two networks so that I could access my file server from the DHCP network. How is this typically done?
I decided to upgrade to Ubuntu 10.04 a few days ago. My internet then stopped working.I changed the security for my network to WEP (instead of WPA)Is there another way around this problem or can I just download another driver? I do not intend to stick with a WEP secured network.
I've installed it no problems on my desktop and I really love it. Now I'm trying to install it on my Satellite and I'm having a couple of problems. When trying to connect to my wireless network, I can see my network, but it will just keep asking me for my WEP. I've confirmed that there is nothing wrong with the network or the password I've provided. Sometimes when I boot up, the network manager just says that the wireless networks are disconnected and can't find any. The wired connection always works just fine.
I have a problem with network manager. I use Ubuntu 10.04 on a Dell Latitude D530. I used to have the same problem with Ubuntu 9.10 before I upgraded. I typically connect to two wireless networks: HOME and WORK. Both networks are set to automatic connection mode. I am at work, I connect to the network WORK. At the end of the day, I just close the lid and go home. At home, I open the lid and have the following problem: network manager still displays the network WORK whereas it is clearly out-of-range and it automatically tries to connect to it. It does so until network manager asks if the password is correct.
If I want to connect to HOME, I have to tell network manager to do so. Then, I receive a notification that I am disconnected to WORK. Next morning, I go to work, and I have the same problem, network manager tries to automatically connect to HOME. What I would expect from network manager: when I am at home, NM automatically connects to HOME and does not display WORK, when I am at work, NM automatically connects to WORK and does not display HOME.
I have no problem with my wireless network at home, or visiting friends, but it won't connect to public, open, unsecured WiFi networks, eg hotels, trains, ships.I'm using Ubuntu v9.10, NetworkManager applet v0.7.996, on a Dell Inspiron 1750 laptop.If I left click on the NetworkManager, the available wireless networks are displayed and I can see the relevent open networks, named as expected and shown without the lock icon. I click on the relevent entry, watch a spinner for 30 seconds or so and then it drops off and I have no connection. This happens for "all" open connections.If I look at my defined Wireless Network Connections now, I can see, eg, "Auto Internet@Sea, Last used: never". Editing that connection: