Here is the output of bootscript,
Code:
#
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
#
[code].....
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I have been foolish and accidentally deleted the 'Boot' folder from my Vista partition and now cannot boot Windows from the GRUB launcher. I'm not sure what to do next, since I can't find the recovery DVD either.
I managed to find a site with the 'bootmgr' file available to download but couldn't find anywhere to download the contents of the 'Boot' folder. Can anyone point me in the right direction? Is there any software that can be run in Ubuntu (which launches perfectly well of course) which might fix this?
Since certainly half a year I have to add the vga=0x317 parametere at the end of the root parameter in the menu.lst file after each upgrade of the kernel and also recently after upgrading from 11.1 to 11.3. Without this, the splash screen is not shown on my HP Pavilion laptop.
View 5 Replies View RelatedThis morning I attempted to 'clean' up some old files/programs from my dual mounted (Vista/10.04) laptop. All seemed ok until I tried to run Vista and I got the following:
/windows/system32/winload.exe
status Oxc000000F
missing or corrupt
I then tried to reboot into Ubuntu but it keeps trying to load windows. It looks like I have somehow lost my grub, so now I have lost Ubuntu and Vista. I tried my Vista Start Up disk and at the command prompt I entered:
Bootrec.ext /fixboot
Bootrec.exe /fixmbr
on restart it went back to the 'missing or corrupt' information. Is there some way I get get back to normal?
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
I've previously had a dual boot Vista/Ubuntu machine that was working fine. Fast forward, I'm not able to boot into Vista at all and decide to reformat, return to factory settings after which I'll simply reinstall Ubuntu to get my functioning dual-boot back. I reformat the drive, everything seems to work fine and when I reboot I'm met by the GRUB screen rather then the Vista bootloader screen I expected. I select the Vista option and rather than starting to boot, seeing the Windows splash and then breaking (as it's been doing for a few weeks leading up to my decision to reformat), I'm promptly given a message that it can't find the disk 5252-ACFA (that Vista was previously on). After further inspection, my Ubuntu partition is still in tact and untouched, so I think the 'reformat' simply reformatted the Vista partition not the entire HD as I'd wanted. How do I modify GRUB to point to the new correct Vista boot?
View 4 Replies View RelatedI use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1.
Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE.
I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and W7?
Code: parttype (hd0,0) 0x7
rootnoverify (hd0,0)
makeactive
chainloader +1
Here the other day, I decided to try out 10.04 Alpha. But after I had done it, I weren't able to boot Vista anymore. When I choose it in the grub boot loader, it changes to only showing the word "GRUB", and nothing more happens. As a desperate attempt to fix it, and because I weren't happy using the Alpha, I then decided to switch back to 9.10, but the problem with booting Vista persists.
View 9 Replies View Relatedupgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
I'm extreemly new to Ubuntu and installed 10.04 onto a partition this morning. When I boot up my PC a menu called GRUB comes up and the list of OS's has ubuntu 1st. If I dont change my selection to vista it automatically boots into ubuntu. How can I change the order or default booting OS? I have seen other people talk about it but I'm not sure if it's up to date.
View 2 Replies View RelatedI will be booting Vista, XP, and then installing Linux with grub. So the Vista boot loader will be setup to boot both Windows, so then when I do install a Linux on the same hard drive, (all on separate partitions) what is the best method to boot up all 3 systems?Should I just allow grub to install on the master boot record, and then chainload XP and Vista. Or I could install grub on the boot sector of what will be my Kubuntu root partition, and then try to add this Linux to the Vista boot loader ?
View 7 Replies View RelatedI currently have both Ubuntu 9.10 and Vista installed, and would like the Grub to boot to Windows as default selection. Unfortunately, I did not remember which OS I installed in the first place, and even could not find the menu.lst either.
View 2 Replies View RelatedI use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1. Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE. I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and Win7?
Code:
parttype (hd0,0) 0x7
rootnoverify (hd0,0)
makeactive
chainloader +1
I recently installed Ubuntu (Karmic Koala) on a Dell Inspiron 1525 which already had Vista installed on it. The installation went just fine and I could boot into either Ubuntu or Vista using the Grub bootloader options. After updating grub through the update manager however, I can no longer boot into Vista and get an error message that says:
"Windows cannot start. A recent upgrade or hardware change may have caused this".
And below that:
File: \boot\bcd
Status: 0xc000000e
info: An error occurred while attempting to read the boot configuration data"
When I run sudo fdisk -l, I get the following:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000080
Device Boot Start End Blocks Id System
/dev/sda1 1 6 48163+ de Dell Utility
/dev/sda2 * 7 13619 109345113+ 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13619 15936 18605117+ 7 HPFS/NTFS
/dev/sda4 15937 19457 28282432+ f W95 Ext'd (LBA)
/dev/sda5 19066 19457 3148708+ dd Unknown
/dev/sda6 15937 18930 24049242 83 Linux
/dev/sda7 18931 19065 1084356 82 Linux swap / Solaris
Partition table entries are not in disk order. I have the Vista recovery disk but was wondering whether using it to repair the Vista bootloader might mess up Grub.
I was dual-booting Vista Business and Fedora 12 on the same hard drive. I deleted the Fedora partition and expanded the Vista partition to use this space.
I figured that because GRUB was on the Fedora partition (at least, I thought it was), I'd just be able to load up Vista as usual.
When I turn the computer on, a GRUB command-line comes up, and to be completely honest, I have absolutely no idea what to do at this point. I'd quite like to just get rid of GRUB entirely and boot straight into Vista, but again, I don't know how.
I've tried using a Vista recovery disc to sort out startup problems, but it doesn't do anything because the problem occurs before control is passed over to Vista.
What can I do to fix this problem? Can I get delete GRUB and boot straight into Vista? How?
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
View 2 Replies View RelatedI'm testing out 10.04 on one of my partitions, and I love it. I have been using it exclusively for a while now, I have not logged into Windows since! Really don't care about windows anymore!However, yesterday I went to boot into windows... and I noticed the option to choose it is missing from my list! Maybe I'm just not getting to the correct list? The list I get shows like 5 different modes and versions of Ubuntu and something called Windows Recovery (which does nothing), but that's it.
View 9 Replies View RelatedI have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
View 4 Replies View RelatedI want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
I'm using HP Pavilion dv2108tx I have ubuntu and Win7 dual boot. The problem is every time I change setting to the BIOS there will be a new list of ubuntu boot came up and now I scroll trough the whole list. Is there anyway to edit GURB boot list.
View 3 Replies View RelatedWith Ubuntu 10.04 im having trouble viewing the boot
menu.Where would I find that? Also ,without asking the forum this question, where would I find that info?
I installed The latest and greatest Ubuntu 9.10 (Karmic Koala) and everything is clicking along just fine except one annoying feature that I am unable to get my finger on.I have quite a list of choices at bootup. I updated a couple version of the kernel and there is this memtest thing...twice... Then my family also uses windows 7 so that is the default at the bottom of the list set to boot after 3 seconds to keep the nagging to a minimum.
I would like to know the cleanest and safest way to have the list only show the current kernel option and the windows 7 option if this is even advised. Would it be best to have a backup (Previous kernel) in the list? *just in case* Is it safe to seek out the old kernel by version number and uninstall? Will this remove the entries in the list? Is editing the list and leaving other options installed wise? Is there a gui grub2 configuration tool with these advanced options? I have StartUp-Manager, but there is no options to change the list.
Im looking for the best/safest option to get this done because I now see another kernel update image in the update manager and it is going to increase the size of my list once I find the time to update. Im a bit green and scared I will ruin a good thing here. Everything is working perfectly so far and I realize one click and it could all be over.
I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:
Windows failed to start...
File: windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedI have just installed ubuntu with a USB key, I have Vista installed in drive C: and I created a partition (L: ) and installed Linux root (/ ) in that one.When there was the screen where I could choose the boot loader i left the default option instead of choosing Windows Vista Loaderand now I can't boot Vista anymore.
In grub i see a windows vista option, but that option brings me to a recovery partition and not to the real operative system. I know that vista is not broken because when I used wubi I was able to boot from the vista bootloader without any problems, but I never could boot vista from grub because it brought me to that recovery partition.I can access all my files on the disk from ubuntu, but I would like to be able to restore the vista boot loader and use again windows when I need it.Is there a way to restore vista's boot loader? I tried to do automatic startup repair from the vista recovery cd but it says that no problem could be found.