Fedora :: FC12,FC13,FC14 : The Form Don't Give Anymore The Filename Which Already Exist?
Dec 29, 2010
From at leat FC12 to FC14, I notice that the form we have to fill in to write a filename (for example) don't give anymore the choice of the file which already exist in the current directory.I explain :Use gimp or geditCreate a simple file : example.txt or xample.jpgnd save this fileclose this filecreate now a new filetry to save it under the name: exand in FC9, the system added one line to propose you example.txt because example match with ex you just typedin FC14, this proposal doesn't exist anymore.How to setup it again ?I am working with gnome but the problem is the same with kde
I had been running Fedora core 13. Everything was running fine. Gaming graphics were excellent. 3d acceleration was as well. Did a fresh install of fedora core 14 and now gaming graphics just plain suck. Colours are distorted, textures are shotty, lots of black spots in the distance.I've install mesa experimental drivers with no improvement. also messed with the settings in either game with little to no improvement
Specific games this is happening on are urban terror and nexuiz.Graphics card is Radeon HD 4650
Following this from the wiki: It states Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update. How do you ensure that its the last package to update?
First install the new fedora 13 gpg key. You may wish to verify this package against [URL] and the fedora ssl certificate. rpm --import [URL] Upgrade all packages with yum update yum yum clean all yum --releasever=13 distro-sync
- Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update ... YMMV. - Intel video no longer works without Kernel Mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present. - nVidia video no longer works without kernel mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present. - It may be necessary to run "db_recover -h /var/lib/ldap/ ; chown ldap:ldap /var/lib/ldap/*" once in order for slapd to start.
Before buying an HP DL380 G5 (Intel Xeon 2 or 4 core) I need to be sure. Does anybody have installed succesfully FC12 or FC13 on this hardware? I could not find an HCL for FC12 or FC13.
Took an FC12 system to FC13 via 'preupgrade'There was a REALLY old version of gimp-print-cups in RPM, and the installer announced "a fatal error occurred". However, everything else seemed to download properly and I allowed the upgrader to reboot the system.
a) grub boots the kernel, then the kernel can't find root and panics. It does this because it can't root file system with root=UUID= kernel option. If I manually tweek the grub line to use root=/dev/sdx, kernel finds its root and boots up to the next problem.
b) GUI environment not launched. Init scripts die on "error loading modules.dep". Sure enough - one is not there. Ran "depmod" to generate it ,and rebooted. System reboots into GUI, where I login to find the next problem.
c) Evolution won't start. Reason turns out the evolution-data-server from FC12 is still present. Did a check on just how many other FC12 RPM's are present: 1100. Yeah - over 1000. About 850 of the FC12 RPM's also had FC13 replacements installed. Did an "rpm -e" on these. Also had to do some remove action on mkinitrd, nash, plymouth-scripts-0.8.0, and parted-1.9.0 as there are replacements for these utilities under different package names. That cleaned up the system some, to present me with the next problem.
d) yum package repository still linked into FC12. Removed fedora-release-12-2.noarch and then I could "yum install" evolution and a few other packages properly.
I've done one other FC12->FC13 upgrade today, and that went flawlessly. So, I think in general the upgrade works fine. It just looks like if preupgrade finds anything amiss, it doesn't take care of a lot of things and generally leaves you with an unbootable mess to clean up.
I was recently messing around with the partitions on my tri-boot system and ultimately messed everything up. After a few hours of tinkering I was able to recover but learned something interesting in the process.Something has changed with FDISK, or some underlying component, from FC12 to FC14. I keep partition backups so when I mess things up, I restore using dd. Anyway I think I was restoring partitions at the wrong starting blocks as some partitions worked while others did not. I just happened to notice the start for sda1 on FC14 and said to myself, that's not right.
Anyway take a look as the 'fdisk -l /dev/sda' for FC12 and FC14. What gives? My backups were all made on an FC12 install and when I restored from an FC12 boot CD all is well. Anyone know what the deal is? Should I recreate all my backups again using FC14? Not sure how the boot sector is affected with this FC14 sda1 start at 64.
HTML Code:
*** FC12 x64 Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I upgrade from FC12 to FC14 on Monday last. Yesterday, I noticed that CUPS wasn't running, so I looked at services and started it manually. The services appeared to be set to start CUPS automatically, but today again it wasn't running. Looking at messages, I now have the following 'errors' that appear to be disabling CUPS due to some form of load dependency.
I have with the Videocard of one of my laptops. This laptop has a Mobility Radeon X600 card (RV380 based). I always had 3D hardware acceleration with mesa (at least in Fedora 12 and 13), but now it doesn't work. Boot seems normal, but reviewing the logs, I see this in the Xorg.0.log (after loading the radeon modues):
[Code]....
I don't have hardware acceleration, so no compositing and no gnome-shell I tried with both 7.9.1 and 7.9.2 versions of mesa-dri-driver (and its libs). The xorg-x11-drv-ati version is 6.13.1-0.3.20100705git37b348059.fc14
I already had solved the problem [URL].. but after several yum updates it has appeared again. Within the script "/etc/ppp/ip-up" the sixth parameter isn't provided. But the sixth parameter should be "ppp0" (in this case). The script sets it into the variable $LOGDEVICE and passes it as first parameter to annother script. Successfully I had patched "/etc/ppp/ip-up". I would like to report a bug but I'm not sure if it is a wvdial or a ppp/pppd or a Fedora 14 bug.
Now (after several yum patch updates) my patched /etc/ppp/ip-up doesn't help anymore. The registration at the mobile phone provider seems to be ok but the internet connection isn't initialized.
According the man pages wvdial starts ppp or pppd and one of them seems to call /etc/ppp/ip-up. At which point in the subprocessed scripts (under /etc/sysconfig/network-scripts/) I didn't find out yet.
I don't remember ever having to even run sensors-detect in FC12. I searched the board for a bit and didn't see any solutions. I'll attach the full output from sensors-detect.
When I close the lid of my laptop and open it after some time I am greeted with a message "Failed to suspend". When I tried to manually suspend/hibernate, I saw these options are not available there at all. Of course, they did exist when I did the fresh installation but I cant see them anymore. I am totally pissed off with this.
When I close the lid of my laptop and open it after some time I am greeted with a message "Failed to suspend". When I tried to manually suspend/hibernate, I saw these options are not available there at all. Of course, they did exist when I did the fresh installation but I cant see them anymore.
iam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
Code: $ su -c 'yum install wine' this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
I have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.
$ uname -a Linux a 2.6.35.10-74.fc14.i686.PAE #1 SMP Thu Dec 23 16:10:47 UTC 2010 i686 i686 i386 GNU/Linux $ lsb_release -a LSB Version: :core-4.0-ia32:core-4.0-noarch
[Code].....
How can I set a pattern that will output a filename equal to the original filename? E.g.
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
I've already tried Seamonkey to create a web page but can find no way to create a web form in which I want to create form fields. Before moving to Ubuntu I used Microsoft FrontPage to create web pages with form fields. This was easy to do. what is available to do the same in Ubuntu?
I've installed ethernet adapter, it is made in china from a manufacturer called FOX. The driver for that adapter is supported for sco linux kernel version 2.4.x and 2.5.x .However, I'm using Centos5 but the OS didn't recognize the adapter alone, so I'm trying to follo instructions on the driver on the attached CD.
The CD contains file named "SC92031.c", the instructions tell me to do the following "Compile the driver source files and it will generate sc92031.o"
We are using several printers on our Linux RH network to print customer invoices and receipts. Receipts are short forms of just 21 or 22 lines. Two of the printers (an HP LJ1300 and a Dell 5200) eject the receipt paper automatically; the other two HP (a LJ 4200 and a LJ2420) do not eject. You have to press the green button on the printer. Is there a solution to that? They are all set up with the same PCL settings.
How can we convert a dynamic library (filename.so) to a static library (filename.a) using gnu gcc . Can we get a static library form a dynamic library . I saw a few post in which the conversion form a static library to a dynamic library is mentioned but, unfortunately, not the other way.
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
I think there is a bug with gmixer on fc14 using lxde. Every time I log out and log back on gmixer spawns another process. So if I log out and log back on 6 times I will have 6 gmixer processes running concurrently.
I just installed FC13.It wiped out everything from the previous (FC11) installation. I cannot connect to the existing windows network that was working before. I don't see SAMBA so I downloaded and installed the RPM. I still don't see it on any of the menus. I am trying to connect to the existing Windows network
I have been running FC13 for some time now without any problems on my HP dc5800 Microtower. Recently I ran a software update, and when I rebooted the machine I got a blank screen with only a blinking underscore in the upper-left corner. Rebooted several times to no avail. I thought perhaps I had made a mistake, so I just reinstalled. I have tried reinstalling several times now with both 32-bit and 64-bit FC13, each time with the same result: everything works fine up until I install software updates; then after the next reboot I get a blank screen with the blinking underscore. I see the POST screen, and then it just goes blank. It doesn't seem to respond to any keyboard/mouse input; I eventually have to hold down the power button to make it power off.
I am trying to setup VNC server on FC13 box. i am not able to do proper configuration. Can anone point to me a good link which is working. I did many configurations. but no success yet. I have an issue especially with xstartup script. I am running VNC server on Linux and RealVNC viewer on Win Vista OS.When i try to connect to VNC server from RealVNC viewer from Win Vista. It gives error like "unable to connect to host: Connection timed out (10060)"
