Slackware :: Upgraded To 13.1 - Temporary Directories Full
May 26, 2010
I've upgraded to 13.1 from 13.0 but can't startx. I get this error;
'call to lnusertemp failed (temporary directories full?)'
When I ctl-alt-backspace there are numerous messages including these two;
'/usr/bin/kde4-config: symbol lookup error:/user/lib/libkdecore.so.5:
undefined symbol: _zn9qlistdatadetach3ev.
and
startkde: error: could not locate lnusertemp in /usr/bin/startkde: line
302::command not found.
Linux 13.0 worked OK right out of the "box" so I don't understand why this version has this problem. Was something changed from 13.0 to 13.1?
View 6 Replies
ADVERTISEMENT
Feb 5, 2009
opensuse 11.1 64 bit NVIDIA 180.22
yesterday i update my kde from 4.13 to 4.2.
Before i install kde 4.2 ,i disable all repo about 4.13
and remove kde 4.13 .using one-click installer,i install kde 4.2 successfully.but i can not login my account in kde session .it says
"call to lnusertemp faild (temporary directories full?)..."
use command
df /tmp
df -i /tmp
df /var/tmp
df -i /var/tmp
i found my disk have enough space,about 70% free space.i try to lonin use root account .it failed too ,with same error.any one know what is the matter about my kde 4.2?
View 9 Replies
View Related
Sep 22, 2010
opensuse 11.1 64 bit NVIDIA 180.22 yesterday i update my kde from 4.13 to 4.2. Before i install kde 4.2 ,i disable all repo about 4.13 and remove kde 4.13 .using one-click installer,i install kde 4.2 successfully.but i can not login my account in kde session. it says "call to lnusertemp faild (temporary directories full?)..."
use command
df /tmp
df -i /tmp
df /var/tmp
df -i /var/tmp
i found my disk have enough space,about 70% free space. i try to lonin use root account .it failed too ,with same error. any one know what is the matter about my kde 4.2?
View 5 Replies
View Related
Aug 4, 2010
I had a fresh install of Slackware 13.1 up and running. I was looking to use an app which could only run on a gnome distro. So I installed gnomeslackbuild. Ran into dependency hell so I gave up the ghost and decided to reinstall.Re-install resulted in a message "Call to lnusertemp failed(temporary directories full).Had this before a different machine and sorted with another install at the time.Tried this but it keeps coming up with the same message. (4 installs later).Quote:
xset: bad font path element (#23) possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
[code]....
View 4 Replies
View Related
Jan 24, 2010
I am using OpenSuse 11.2 (64 bits) with KDE 4.3.1. My hard disk partition contains 3 areas : / + /home + swap. Frequently the / area is filling with, I suppose, temporary files until it is full (15 Go) and that in a very short time, typically about 5 mn. Then, these files are cleaned by the system, when disk space is needed I suppose. The point is that during this time, the system goes slower and slower until the "cleaning". That seems to occur only when Firefox (3.5.6) is running so I suppose that these files are temporary internet files.
View 9 Replies
View Related
Dec 31, 2010
I upgraded from FC12 to FC14 and now the system/case fan blows full speed constantly. I also moved from i386-PAE to am64.
The CPUs are cool, the machine is basically idle, and the fan noise is really annoying (and blowing cool air).
In FC12 the fan would auto-adjust with CPU load. This is not the case now.
I ran sensors-detect and it doesn't seem to find my fans:
[root@pangea modprobe.d]# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0C (crit = +75.0�C)
k8temp-pci-00c3
Adapter: PCI adapter
code....
I don't remember ever having to even run sensors-detect in FC12. I searched the board for a bit and didn't see any solutions. I'll attach the full output from sensors-detect.
View 2 Replies
View Related
Mar 3, 2010
My USB printer stopped working after I upgraded Slackware, using the Current.Also can not install any USB printer. CUPS version 1.4.2.
View 14 Replies
View Related
Jun 20, 2011
Code:
Total: 852 directories, 8441 files, 8 symlinks
New: 17 files, 0 symlinks
[code]....
View 2 Replies
View Related
Dec 23, 2010
Anyone upgraded php to 5.3.x in slack 13.1?
Could you please share the slackbuild?
View 7 Replies
View Related
Mar 11, 2010
Symptoms
- PS/2 mouse works fine under gpm
- PS/2 Keyboard works in console terminal
- Neither Mouse nor Keyboard works under kdm or xdm
- And: #ps aux | grep hal
shows:
82 4259 0.0 0.3 6472 1240 ? Ss Mar10 0:02
/usr/sbin/hald --daemon=yes --use-syslog
but does not show anything like:
root 4298 0.0 0.1 3300 544 ? S Mar10 0:00
hald-addon-input: Listening on /dev/input/event1
- And syslog show: when starting hald with --verbose=yes --use-syslog
Mar 10 20:30:48 darkstar hald[519]: 20:30:48.792 [E] hald.c:124: Cannot
start addon hald-addon-keyboard for udi
/org/freedesktop/Hal/devices/platform_i8042_i8042
_KBD_port_logicaldev_input
Mar 10 20:49:41 darkstar hald[2454]: 20:49:41.651 [E] hald_runner.c:671
: Error running 'hald-addon-keyboard':
org.freedesktop.HalRunner.Failed: Start request failed
- You will find that deleting:
/var/cache/hald/fdi-cache
(and of course: /etc/rc.d/rc.hald restart)
- will allow hald to start the correct module:
/usr/libexec/hald-addon-input
- instead of trying to start a non-existant file:
/usr/libexec/hald-addon-keyboard
My theory is that since hald is the same version in 12.2 and 13.0, had believed that the cache file held valid information, when in fact it did not. I did not think to check the modification date before deleting the file.
View 1 Replies
View Related
May 25, 2010
I upgraded to 13.1 and can still login with all users via ssh on a headless machine, but now when I try to login to X via XDMCP I just get returned to the login window. I do not have KDE or kdm installed, but rather use xdm. I was having no trouble prior to upgrade and even had an XDMCP session going during the upgrade, but once I logged out I couldn't log back in. I'm not real sure what's going on.
View 1 Replies
View Related
Apr 28, 2011
Under Linux, I'm looking for a command to list the biggest file and/or the biggest directories under a directory.
View 3 Replies
View Related
Oct 16, 2010
this is what i get when i try to compile ndiswrapper:
checking for a BSD-compatible install... /bin/ginstall -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
[Code]...
View 10 Replies
View Related
Nov 22, 2010
I recently upgraded my system from 13.0 to -current using slackpkg. However, I did not go through warnings on the web regarding the exact procedure to be followed (first running install-new and then upgrade-all). I just did a upgrade-all and then rebooted the system. And then the system would not boot and gives a libblkid.so.1 related error. Upon googling, I found suggestions as to booting from the install dvd 13.0, installing the old version of e2fsprogs and then reboot and doing the neccessary changes [URL]... Me being a linux newbie, don't know how exactly to do these things. Can anybody direct me with the list of commands/things to be done to solve this issue?
View 9 Replies
View Related
May 22, 2011
When I first did my install of Slackware 13.37, I installed the 2.6.38.4 kernel from /testing.
I did a "upgradepkg testing/kernel*.t?z"
Well just now I realized that there was a kernel-headers package in /testing, and I've heard that you should only use the kernel headers that glibc was compiled with.
So did I make a mistake installing the kernel-headers from /testing?
And if I revert back to the stock kernel-headers package, will I have to recompile all the programs I've compiled with the 2.6.38.4 headers?
View 13 Replies
View Related
May 24, 2011
I just upgraded to 13.37, and for some reason wicd now cannot connect to my wireless point. It keeps saying the password is wrong, when I know for an absolute fact that it is correct (even changed the password to '1' just to make sure, and no dice. Which is weird because even though its the exact same version of wicd, and not only that, it no longer seems to be able to see networks with my built in card, so having to use a USB card. Anyway, googling turned up very little. Seems to be a common problem across distros, and some people reported that downgrading to 1.6.x fixes it.
So, I ran
Code:
removepkg wicd
And it uninstalled wicd. Downloaded wicd-1.6.2.1-x86_64-1.txz from a 13.0 mirror and did
Code:
installpkg wicd-1.6.2.1-x86_64-1.txz
While in the correct directory. It installed, and I ran wicd. But checking the version number when it loaded, it says its 1.7.0 again.
Not really sure why this happens. I'm assuming there's some remnant of wicd that removepkg doesn't dump, and its preventing me from installing this older version of wicd. What do I need to do for this? If anyone has a surefire way to make 1.7 work again, that would be fine.
View 7 Replies
View Related
May 15, 2011
I upgraded my wife's machine (nearly identical to mine) and her KDE taskbar is flickering and not responding to mouse clicks. The mouse works on the programs that start at login, but I can not open the k-menu. There are flickering boxes at either end of the taskbar.
View 8 Replies
View Related
Apr 30, 2010
I have a new install of Slack 13 and upgrading to current will break a lot of things for my 4 year old son (he's a gnome guy, what can I say). I will be using this machine too, and I NEED KDE, but of course the stock KDE packages are unstable to say the least. I know I've seen people talking of downloading upgraded kde packages for slackware 13, but when I google, I find a lot of things complaining about the stock KDE and of course Eric's packages for current.
View 2 Replies
View Related
Feb 6, 2011
NFS server is on Slackware-current64 and client is on 13.1. The directory being exported is vfat formatted on a firewire drive. I've been accessing this share on the client with Amarok and Juk without incident for a couple of months. Yesterday I decided to try out moc on the client with this setup. After many revisions to fstab options on both the server and client I still get the same result: after a couple of hours running moc post remounting and re-exporting, the directories on the nfs share on the client start disappearing or corrupting.
View 3 Replies
View Related
Apr 27, 2010
I am wondering if there is a way to use src2pkg on source directories I have checked out from git? I can't see any such option in the manpage. At the moment it works if I tar it up, but I can't find a way to just use the directory directly.
View 1 Replies
View Related
May 24, 2011
I'm running slackware 13.37 and when looking through the x.org log I see that two directories are missing:
Information[ 68.572] (WW) The directory "/usr/share/fonts/local" does not exist.
Information[ 68.572] Entry deleted from font path.
Information[ 68.572] (WW) The directory "/usr/share/fonts/CID" does not exist.
[code]....
View 3 Replies
View Related
May 12, 2010
I've got following problem: need to burn files which are spread through several directories, have names longer that 32 chars, and the chars like " " (space) nad other strange are allowed in the names of files. The file sizes are about 300 MB up to 1.5 GB (perhaps more). I want to burn .iso images (not on fly). I'm not using any graphical interface, so programs like k3b are not allowed.
View 8 Replies
View Related
Nov 14, 2010
I installed Slackware quite awhile ago now, and am starting to wish that I'd done a full install instead of cherry-picking my packages. Is there any way I can do it retroactively... you know, just add all the stuff I didn't install? I'm running -current.
View 15 Replies
View Related
Feb 12, 2010
i am in the process of setting up my wonderful slackware system on my laptop, and now i would like to make sure i am able to run as much multimedia as possible (to be up to snuff in this realm with mac and windows users). i am running slackware x86_64 version 13.0 with a full install (but only with the software sets a, ap, d, f, k, kde, l, n, x, xap, y) and have installed flash-player-plugin from slackbuilds.org.
recently i stumbled upon this website: [url] it explains precisely what i would like to know: which packages should i install to get a fully-featured multimedia slackware install (and in which order should i build/install these packages to take care of dependencies). i emailed the author to make sure this guide was up to date with slackware 13, but, sadly, it is not. it seems that mr. anderson uses slackware 12.2, and thus there may be inconsistencies between what this guide explains and what works on the newest slackware. for example, mplayerplug-in has been depreciated in favor of gecko-mediaplayer. i need to know if more of this has happened. i would simply test it myself, but i have been distro-hopping reinstalling repeatedly over the past few weeks for various reasons, and i am trying to avoid dirtying up my system too much and having to reinstall yet again.
so i ask of you, does mr. anderson's list apply to slackware 13.0, or are there any changes that need to be made? i ask because someone here may have already used this guide and may be willing to share their knowledge and experience on it. eric's vlc slackbuild is very interesting, and i plan to run that, so vlc and its dependencies are covered. my multimedia needs are not too demanding, but i do expect web media to work flawlessly. i often visit www.apple.com and watch movie trailers, guided tours, etc., so i need quicktime videos on the web to work. videos and online flash games already work fine with flash-player-plugin. i also visit some web sites that have windows media formats being streamed (.wmv and .wma).
View 14 Replies
View Related
Jul 20, 2010
I read on another thread that i can 'run' this 'script' somehow to add a preamp to kmix to raise the volume.
1. Is it correct?
2. How do i use it?
pcm.!default {
type plug
slave.pcm "softvol"
}
[code]....
View 4 Replies
View Related
Aug 6, 2010
I have windows on dev/sda1 taking up the full disc.I have set up on my second diskQuote:
sdb1 ubuntu root
sdb2 ubuntu home
sdb3 linux swap
[code]...
View 3 Replies
View Related
Dec 19, 2010
There is a "standalone seamonkey-solibs package for RPM, gxine, etc". But after recent upgrades in -current, I can't use rpm without full seamonkey package installed. Can someone revise the contents of seamonkey-solibs and add missing files to it?
$ LANG=C rpm -qp --qf %{NAME} opera-11.00-1156.i386.rpm
error: opera-11.00-1156.i386.rpm: Header SHA1 digest: BAD
error: opera-11.00-1156.i386.rpm: not an rpm package (or package manifest)
And `rpm2txz -nd opera-11.00-1156.i386.rpm` doesn't work as expected without seamonkey package installed.
View 14 Replies
View Related
Jun 22, 2011
I'm currently viewing all my video and DVD stuff on two different desktops (CentOS and Kubuntu), each with a combination of MPlayer and VLC. Now I'm considering doing everything only with an "MPlayer-on-steroids" build for Slackware 13.37. Basically, I like the one-app-per-task approach. But first things first.
1) I'm basically using this script here as a starting point for my build: [URL]
What libs (from slackbuilds.org) would be reasonable to include before the build to support playback of the most common - and the odd exotic - video formats? The thing with MPlayer is that ./configure --help spits out a gazillion of options
2) Until now I've only used the no-GUI version of MPlayer, since the default interface seems to me almost unusable. Now I understand there are several new frontends available for MPlayer. Is there one that works OK for DVD playback, e. g. enables you to select chapters, languages and subtitles without having to jump through burning loops?
View 14 Replies
View Related
Jan 29, 2010
I made a full install of Slackware and have been using one of my boxes as an Apache web server. I recently tried to install Joomla, the PHP CMS software, and when I ran the pre-install requisite checker (The second step of the installation), the installer notified me that I do not have MySQL support. I find this especially strange as I've made webpages using PHP that made use of MySQL databases.
My pre-post research has lead me to several other people with the same problem. Half were using windows, and just had not uncommented the "extension mysql.so" line in the php.ini file. The other half solved their problem by installing their distro's php-mysql module. According to what I'd read, you can still use MySQL if you don't have that module installed, but Joomla does need it to be able to use the MySQL database.
I've searched long and hard for this plugin/add-on/module for Slackware, but to no avail. It's available in RPM format, and I know that it's possible to use rpm2tgz to convert these files, but I don't know exactly what the issue is, and if Slackware may be different. I don't want to install that and then find out that it overwrote something that I'd needed.
View 3 Replies
View Related
May 9, 2011
I have been trying out the new Slackware 13.37 and I have found that KDE will crash anytime I am watching a full screen video with Firefox 4 and attempt to adjust the audio levels using the keyboard buttons. If I use the mouse to adjust the audio level through the audio mixer gui, it seems to work fine. Both of my laptops ( a Gateway MP6954 and a Dell Inspiron 1520) are exhibiting this same problem. Both have the Adobe Flash Player version 10.2.159.1 installed.
View 1 Replies
View Related
