Fedora :: Kernel 2.6.35.10-72.fc14 Makes The F14 Hang Constantly Without Any Hint?
Dec 26, 2010
I tried this kernel released on Dec 21th. It makes my F14 constantly suddenly freeze in GUI with no keyboard/mouse response anymore before restart. Only thing to do in this situation is press power-off button and after restart I found no hint in logs.My laptop is thinkpad t400 and I think it's a very common installation.Now I revert to older kernel 2.6.35.9-64.fc14.i686 and it's works quite well.
View 14 Replies
ADVERTISEMENT
Feb 4, 2011
i am working on a client server real-time gui application written in C++ for Redhat. There is an issue with this application that it makes the system hang. i am not able to sort out the issue as it happens randomly. Sometimes with in half an hour it makes the system hang, sometimes it takes 4 or 5 hours when it receives realtime data. Is there any way to debug this issue. I tried valgrind..but it was not of much use..
View 4 Replies
View Related
Dec 31, 2010
I upgraded from FC12 to FC14 and now the system/case fan blows full speed constantly. I also moved from i386-PAE to am64.
The CPUs are cool, the machine is basically idle, and the fan noise is really annoying (and blowing cool air).
In FC12 the fan would auto-adjust with CPU load. This is not the case now.
I ran sensors-detect and it doesn't seem to find my fans:
[root@pangea modprobe.d]# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0C (crit = +75.0�C)
k8temp-pci-00c3
Adapter: PCI adapter
code....
I don't remember ever having to even run sensors-detect in FC12. I searched the board for a bit and didn't see any solutions. I'll attach the full output from sensors-detect.
View 2 Replies
View Related
May 27, 2011
i have just upgraded from f14 to f15 using preupgrade. i am now still waiting for the first boot to finish. the screen is stuck for more than an hour and the last line written was:
Started LSB: Start up the OpenSSH server daemon. and there is a blinking cursor.
View 3 Replies
View Related
Feb 4, 2011
i am working on a client server real-time gui application written in C++ for linux os. There is an issue with this application that it makes the system hang. i am not able to sort out the issue as it happens randomly. Sometimes with in half an hour it makes the system hang, sometimes it takes 4 or 5 hours when it receives realtime data. Is there any way to debug this issue. I tried valgrind..but it was not of much use.
View 9 Replies
View Related
Jun 26, 2010
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
View 1 Replies
View Related
Feb 13, 2011
where you only get offered the kernel-headers for 2.6.35.11-83 by yum but not the kernel or the kernel-devel? I tried yum clean all and both pointing to the baseurl and mirrorlist and it does the same thing for both. Oddly my other laptop with F14 in the wireless cafe showed all three packages were available.
View 2 Replies
View Related
Feb 12, 2011
there is no sound in Fedora14 after kernel update (kernel-2.6.35.11-83.fc14). when use kernel-2.6.35.10-74.fc14 , I can listen to music.
View 14 Replies
View Related
Apr 12, 2011
I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:
[Code]...
View 4 Replies
View Related
May 1, 2011
It appears that the update process on or about 2011.04.28 downloaded and installed a non PAE kernel (kernel-2.6.35.12-90.fc14) on my box. Until this update, it has been installing PAE designated kernels. When this update occurred, it downloaded the PAE headers and debug, devel and debug-devel PAE components. Has anyone else noticed this in their update?
View 4 Replies
View Related
May 9, 2011
I had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
View 4 Replies
View Related
Aug 8, 2011
I am unable to boot with kernel 2.6.35.13-92.fc14.x86_64 which was installed while applying software updates. It hangs with the last message issued "Registering binary handler for Windows Applications". Searching led to it being related to a problem with the nvidia drivers. I followed the directions in several posts - delete /etc/X11/xorg.conf, reboot, run nvidia-xconfig, reboot and all is fine, but not in my case. The first reboot works but the screen is wrong. There is a 1 inch wide black border around the presentation window. If I then do the nvidia-xconfig and reboot, i am back to where I was before - boot hangs after issuing "Registering...". If I boot to the last good kernel, everything works fine. This happened to me once before and I was able to fix it by rebuilding the nvidia kernel (I think that was what I had to do), but I can't find out how to do that. I have akmod and kmod installed which are supposed to take care of this problem. I booted to kernel 13-92 recovery mode, deleted the xorg.conf file and ran nvidia-xconfig from there. Still fails. I don't know what to list here, but I will do my best to supply whatever is necessary.
View 1 Replies
View Related
Feb 11, 2011
I just built some machines with the Intel 82574L gigabit ethernet chip, loaded Fedora 14, and discovered a problem with the e1000e driver dying after a few minutes. A little time spent perusing the web told me that the same driver had problems in Fedora 12 and Fedora 13 as well. Congrats to Fedora for the hat trick.As of kernel 2.6.35.10-74.fc14.x86_64, e1000e driver 1.0.2-k4 still had bugs.[URL]
View 6 Replies
View Related
Jun 9, 2011
I have a fresh installation from the demo ISO image of F14 running on an Acer TravelMate 4200. The system is a Dual Boot with win Vista. Windows Vista runs without any problems but when using F14 a kernal crash constantly occurs and it then hard freezes or hangs and the machine needs to be cold booted. There is nothing in particular that I am doing either, the problem happens when the machine is idol or when I am working in various apps.
The F14 system is completely up to date running kernel version 2.6.35.13-91.fc14.i686. The following error below is from the automatic bug reporting tool and I have reported this using the tool:
Package: kernel
Latest Crash:Sat 04 Jun 2011 14:55:00
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 000000f8
Comment: None
Bug Reports:
View 2 Replies
View Related
Aug 7, 2010
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
View 4 Replies
View Related
Nov 18, 2010
I used to have FC11 installed with the nvidia supplied binary driver. Worked fine, very stable. Trying FC12 and FC13 live CDs caused a hang, so I stuck with FC11. FC14 live CD did boot so I backed up my own files and did a clean FC14 install. Upgraded to get kernel 2.6.35.6-48, installed the nvidia driver from RPMFusion (260.19.21) and had a working system! Now, after a cold boot, the kernel always hangs during boot. Tried a number of kernel boot option (apci=off, noapic and a few others too). The hang is not always at the same place. The earliest it has hung is after:Disabling lock debugging due to kernel taint
Sometimes its a few lines later at:NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 ...(which would seem to imply that the hang can even occur a step or two before the actual driver is loaded!)
Sometimes it keeps going for a few more seconds and randomly hangs during some other driver load.
Without a specific nvidia driver the system always boots ok, so I'm pretty sure its the nvidia driver but I just can't seem to get a handle on this in a reproducible way. Sometimes, when I have make some other change, it will boot and work ok, but a reboot locks it up again (for example, in case it was SELinux, I disabled it and on the next reboot it booted and worked ok. Then, next boot, it wasn't working again). When I make changes, I reboot using the previous kernel, make the changes and reboot, with an occasional success. Once I start rebooting using the latest kernel, it always hangs.
I'd love to get a solution to this, but even some advice on debugging this would be appreciated!
I'm using 8600GT, 256Mb, PCIe card in a MA69VM motherboard with 3Gb of RAM.
View 2 Replies
View Related
Jun 17, 2009
I installed F11 x86 from the DVD onto one of my machines using a total of 4 partitions:
1. /boot
2. /
3. /home
4. swap
I then created an image of the first 3 partitions with fsarchiver and restored it onto a second machine (with different hardware). Grub was loaded onto the second machine as well without a problem. The new cloned install will get past grub fine but the kernel hangs. After removing 'rhgb quiet' from the boot options, I can see that the last message outputted to the console is something about the PS/2 mouse - this doesn't make sense as the mouse is working perfectly fine.
Additionally, I can still reboot using ctrl-alt-delete so the kernel/CPU must still be responsive. I have tried troubleshooting the various pieces of hardware, so I'm guessing it's something with the clone. All the cloned filesystems appear to be fully intact; the partition UUID's are all the same. I've even tried changing the UUID's both in grub and /etc/fstab to hardcoded /dev/sdaX , but this does not fix anything.
View 2 Replies
View Related
May 11, 2011
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
View 13 Replies
View Related
Jun 20, 2010
I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
View 10 Replies
View Related
Jul 19, 2011
I am looking for a way to do deduplication for my Virtual Machines, I found a project called OpenDudup. It looks promising, it says it needs fuse as a dependency. After looking up what fuse is, it left me with another question. What make a file system is user space different from a file system in kernel space?
View 1 Replies
View Related
Dec 16, 2008
I'm having intermittent trouble with my network card.
It always makes kernel messages like the following:
Code:
View 3 Replies
View Related
Jun 5, 2010
this isn't so much slackware specific as it is general linux related, but using the default huge slackware kernel included with 13.1, acpi reports cpu temps of about 55 celsius i always like to run my own kernels though, and using the latest stable kernel, i have compiled one using what i believe is necessary for my hardware, and everything works as expected except that acpi reports my cpu temp as 80 celsius at idle, causing my fan to be running constantly
so without simply using the generic config included with slack in the newer kernel, what do you think might be causing the thermal issues? i used diff on the two configs and the output is over 5,000 lines, so thats not a huge help, and im really not even sure what to be looking for the cpu is an intel i7 720qm, so if anyone might know any specific settings for that processor type needed for acpi to interface with it properly that would be much obliged here is my config for potential review: [URL] also, if i disable acpi entirely, the fan operates as normal but i cannot get readings obviously
View 1 Replies
View Related
Jul 10, 2011
I want to slim down the Slackware system on my laptop and am wondering if I should go for a different browser than Firefox. There seem to be some lean and fast browsers, but sadly I can't find complete lists of their features on the web. While Wikipedia has some tables about browser features they are very generic and don't tell me what I want to know.
Can anyone point me to a site with complete lists of browser features?
May be anyone can tell me if their favorite browser (except Firefox) supports this features, which are essential to me:
- Tabbed browsing
- Flash, mplayer-plugin and AddBlock Plus
- Import of Firefox bookmarks, and if possible bookmark syncing over the net
- Keyword searches
As far I have seen til now only Seamonkey supports those features, but Seamonkey comes also with a mail client and a web-editor. I don't have the need for a web-editor at all and a mail client is only for me if it can import my mail accounts and filter rules from Thunderbird.
View 14 Replies
View Related
Aug 15, 2010
I'm trying ti boot an xubuntu lice cd 6.06 on a new computer , Intel DG43NB board. I have tried several options at boot with the f6 key and have had no luck at all.It goes to the OK booting the kernel screen and locks up there.
View 1 Replies
View Related
Apr 15, 2009
I recently bought a Toshiba Portege M200 tablet PC and it's caused me no end of grief to load linux on it. I would like to load CentOS 5.x (because my hosting company uses it and I will be able to learn as I run it).
Here are my resources:
I found internet resources to create a boot disk that enables me to see my 8GB Sony USB flash drive via DOS. It works nicely.
I have a laptop drive to USB converter and can access the hard drive directly from my Win XP desktop. I have PowerQuest's Partition Magic Pro (v8.0) and can make Ext2 and Ext3 partitions at will. I have also loaded a program that allows Windows XP to read and write from Ext2 and Ext3. It works well.
I have tried loading boot images from PXE. This option is mostly out because it seems to be a couple levels past my competency (I haven't been able to get it to work).
Given those resources, what's the best way to load either the CentOS live CD... or some other approach?
Since I wrote this, I figured out how to make a boot floppy that can start an external USB CD-ROM/DVD drive. Here are the files on the floppy:
Here's the contents of my config.sys:
Here's the contents of my autoexec.com:
I can boot to the CD and launch linld.com. The problem is that I keep getting a kernal panic message, saying that a memory block could not be addressed. And when I add the following part to the line above: "initrd=d:isolinuxinitrd.img" the install fails and reboots. I have tried to expand the initrd.img and it appears... blank?
View 13 Replies
View Related
Sep 17, 2010
I have read all of the articles I could find on the problems. I am using the lilo bootloader as grub doesn't work. I have also added pci=nomsi to my lilo.conf and ran lilo -v. I can get the system to boot with kernel-2.6.18-8.el5. However I can't get the system to boot with kernel-2.6.18-194.11.3.el5.i686.rpm. When I boot with kernel-2.6.18-194.11.3.el5.i686 the system hangs after it prints bios data check successful. I tried adding suppress-boot-time-BIOS-data to my lilo.conf (I ran lilo -v after the change) and the system still hangs. The Optiplex 320 is running bios 1.1.12
Why won't newer kernels work? Is there a way to get more information to print before the hang to aid in debugging?
View 16 Replies
View Related
Sep 5, 2010
Seems that my kernel was the problem then I update it manually but I want a update in Kernel, but keep in boot my current kernel and add the update kernel on boot, how to? The X, mouse and other freeze but audio still running along with crtl+alt+f2:[URL].. Jay Ashworth 2010-09-05 04:03:09 UTC
"2) Flashplayer in fullscreen freezes X; the audio from the video keeps playing continuously, not in a loop, but the video freezes, and (in some cases) the user can switch to a text console--possibly only once--and kill X without having to reboot. This latter description is pretty clearly the actual bug here on 620157, and if you read all 4 descriptions, you can see that the other three are *not* this particular failing."
View 9 Replies
View Related
Aug 23, 2011
I think there is a bug with gmixer on fc14 using lxde. Every time I log out and log back on gmixer spawns another process. So if I log out and log back on 6 times I will have 6 gmixer processes running concurrently.
View 3 Replies
View Related
May 14, 2011
Are the repositories in fedora constantly updated or are they updated in the next release like ubuntu?
View 6 Replies
View Related
Dec 23, 2010
ati proprietry fglrx driver in fedora 14, anyone know if this exists or where to get it? or is there some other way to get some 3d acceleration on fedora 14 with out it?
View 6 Replies
View Related
