Fedora Servers :: Apache - Listen Only On Specific Domain?
Jun 7, 2009
I am trying to figure this out and it seems I can't So, I have a server which hosts various domains, each domain with multiple subdomains. All websites are set up with "VirtualHost" and they all work properly.The problem I'm having is that if I enter any subdomain of the main domain, I can still reach the webpage.Is there some way of telling apache to DROP / display a forbidden message for all subdomains which are not listed in the VirtualHosts?
View 14 Replies
ADVERTISEMENT
Jun 6, 2011
I am trying to get apache to listen to specific IP address and I have read up of the listen command (http://httpd.apache.org/docs/2.0/bind.html) I can get virtual sites to work but not the apache it self.
View 5 Replies
View Related
Jul 23, 2010
How to configure iptables to allow only 22,80,3306 ports for only a dynamic public ip/dyn dns domain name on a ubuntu server?
View 9 Replies
View Related
Aug 29, 2010
On Fedora 13 is there anywhere else on the system that I have to change to get Apache to Listen to an assigned port, something other than 80. Suppose for instance I wanted Apache to Listen on port 94. I told by the site that their router is forwarding apache to port 94. That doesn't mean I change the Listen in httpd.conf. correct. Apache is still expecting connection on port 80 but in this case 80 then gets forwarded in the router to 94. This is my understanding.
View 5 Replies
View Related
Mar 3, 2011
How can I make NFS listen to a specific card (eth3). I have eth0, 1,2 & 3.
View 1 Replies
View Related
Apr 15, 2010
Client unable to listen to NIS domain server.I have configured an NIS server, which is working fine.I then configured an NIS client to share some like passwd, shadow, etc.By default the client was trying to communicate to the NIS server using the broadcast method..However if I restart the client computer, it fails to communicate or Listen to the domain server. Once I login to the pc, I then check the /etc/yp.conf file and it switched back to the broadcast method.Is there any way that I can make this entry: domain naman.com server station51.naman.com permanent so that even after the reboot it should communicate using the client-server connection rather than the broadcast connection.
View 8 Replies
View Related
Feb 16, 2011
i have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
View 3 Replies
View Related
May 13, 2010
The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
View 9 Replies
View Related
Feb 8, 2010
I've got my Samba up and running and can goto it through my IP but how do I join our domain so I can connect via my Computer name wich is JONATHAN-SERVER?
View 6 Replies
View Related
Dec 28, 2009
I'm going to be setting up my own server soon, but have some questions...
Where do you guys recommend I get a domain name from?
I have looked at GoDaddy for now. Any suggestions?
View 14 Replies
View Related
Mar 5, 2010
Is there a way to force a domain to resolve to a specific IP using .htaccess?
View 1 Replies
View Related
Feb 21, 2010
I use the DynDNS service to keep track of my home server IP. The problem here is that when I try to access my web server via my domain name, the connection is refused. If I first obtain the ip adress (via nslookup), I can get access. I checked the reverse dns lookup and the results dont match. Perhaps this can be a problem browsing. Does the browser or the OS perform the rdns check? Is there a way to whitelist some specific domain in order to skip that check, so I dont have to find out the IP address every time i want to access my home server.
View 1 Replies
View Related
Jul 16, 2010
I m using sendmail-8.13.8-2.el5 along with MailScanner-4.79.11-1
i want to set a rule so that user1@mydomain.com can send only to anotherdomain.com domain. sending mail to any other domain will be rejected. can it be done by sendmail or MailScanner ??
View 1 Replies
View Related
Feb 25, 2009
I have problem with our fedora 8. We have two different domains. So i want to point these two domains to my fedora system but should not go to the same document folder.ecause these are different websites. I tried maximum but i didnt get correct solution.
View 1 Replies
View Related
Aug 27, 2011
How to limit emails sent outside my domain or from a user in my domain with postfix to a valid user? i.e., bob can't send email as jane both from my domain and neither can send email to bob@hotmail.com as someone other then themselves. Using postfix with dovecot authentication through mysql.
View 1 Replies
View Related
Jan 3, 2011
company has asked to block some pages on google.co.in. i can not block the entire domain.is there any way to block specific webpage like
View 2 Replies
View Related
Jan 29, 2011
i have installed apache and bind on my server and i've also registered a dynamic domain through dyndns as jan27.dyndns.biz. i am able to successfully host my own webpages using this method.
then i registered a domain name (lets call it "blah.com") through namescheap.com and have registered my nameserver to my ip address. after reconfiguring the my external zones in bind and restarted my services, i am unable to reach my webpages through the new domain name.. www.blah.com and blah.com would lead me to a opendns.com page but interestingly ns1.blah.com loads my webpages successfully.
View 8 Replies
View Related
Mar 15, 2011
I'm trying to set up a framework where people connected to same wifi connection can enter a local site for developing purposes.I want them to be thrown to a local copy (development copy of the site) when they type in www.development.loc in the browser.I don't want to connect the world, only people connected to my wifi.Anyone willing to help by stating what I need to edit to :1. Allow me to access local copy of site that's on computer (located : /var/www/developmentsitename/) using www.development.loc in browser./and2a. What do I edit to create the server accessible by other computers connected to same wifi connection. 2b. If another computer can connect to this site now, can we create a virtual desktop setting in which workers can work as if they have their own partition on the server to work on and upload work onto the development server.
View 2 Replies
View Related
Nov 26, 2010
First of all I am new user on fedora forum and I love Linux (special Redhat flavours) and want to replace windows into Linux Everywhere. I am having some issue in configuring PDC on Fedora,I want to replace my company Windows Domain controller and file server into fedora file and PDC, I tried from web and through 389-directory server but didn't succeed even once, how to configure PDC with Samba 4 + 389-directory Server, I have heard samba 4 is having awesome support and its better then windows DC, configuring Complete PDC. (Whatever need to configure PDC i.e. DNS, SAMBA 4, SWAT, WEBMIN, 389-Directory Server, Windows sync,).
View 4 Replies
View Related
Jul 14, 2011
I installed Postfix, Roundcube (webmail) and Dovecot. Postfix stores the e-mails in maildirs located at /home/postfix/maildir/[user]@[domain]. Now I set the mail_location configuration option in Dovecot to: mail_location = maildir:/home/postfix/maildir/%u@%d The problem I run into is logging in with [user]@[domain]. Right now I can only login with [user] (without @[domain]), which makes the mail_location invalid (no e-mails can be found). How could I configure dovecot to use the domain name as well as part of the username?
View 8 Replies
View Related
Nov 7, 2009
I am running a basic squid + privoxy combo for web caching/filtering proxy and it works fine. I'm basically running a stock config w/ a few minor edits to allow the relevant hosts access etc.now I am trying to find an easy way to specify privoxy to not filter a specific site (which it breaks). I have tried wading through the privoxy manual + google but I find the config file incredibly complicated. Are there any experts out there who can tell me: what is the easiest way to tell privoxy to 'pass through' a specific website?
View 2 Replies
View Related
Mar 29, 2010
I am thinking about buying a domain name and hosting my web server.
I have seen pricing from $8 to $30 a year. Any favorites from fellow ubunters? Also this whole "whois" thing scares me, if I am correct my information I enter when buying the domain is enter into some big pool of information. People can find this information out and dig up important information. url Can I prevent this with private Whois or how do I set it up? This website examples some of my fears with this whole WhoIs thing, url whois/Private-Whois.html Does most/all domain registers come with email or just email forwarding or both? How does that work? At this moment, my only question about Web Hosting is how do I get Website Statistics as in: Stats, web analytics, web traffic stats and more? I will be web hosting through Ubuntu 9.10 gnome.
View 9 Replies
View Related
Mar 28, 2010
We're using condor at work to have cluster processing of java jobs. I know how to tell condor to require that a given job should be run on a particular slot. You can put on the Requirements string in the submit file a "Name" value(s) -->
Example:
Requirements = ".. Name == slot1@host*.domain.net || Name == slot2@host*.domain.net"
Which would tell condor to only run that job on slots 1 or 2. But what I need next is some way to have condor modify the arguments string depending on the slot it used. Our condor blades have 8 slots per machine but only two CUDA Tesla cards per host, so I want to dedicate slots 1 and 2 for using the Teslas and slots 3-8 for not using CUDA.
My java code has a java '-D' property so I can tell it to use CUDA or not, but then I
have to have a way to configure condor to append that to the job arguments if
the slot is 1 or 2 or not append it otherwise; So I want this arguments list passed for slot1 or 2
"Main.start -Djava.library.path=/usr/local/cuda/lib64 -Dcuda"
and this for slots 3-8:
"Main.start -Djava.library.path=/usr/local/cuda/lib64"
I don't want to just make the developers hack their submit files to put the
-Dcuda on the arguments line in combo with their adding the Name entry for
slot1 | slot2 because that seems error prone to me.
I want condor itself to add the JVM -Dcuda argument when it's slot 1 or 2 to reduce errors because these jobs take a long time and a mistake wastes lots of time.
View 1 Replies
View Related
Feb 16, 2010
Ubuntu Server 9.10I want to set up my dhcp server to also be my DNS server so do I skip these lines or point them at the same server that the config file is on?
View 4 Replies
View Related
Feb 18, 2010
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies
View Related
Apr 6, 2010
How can I set my server to listen at a different port for http access. I would like to use port 8080 (to circumnavigate isp blocks). Also can I do the same thing for sftp connections?
View 3 Replies
View Related
Feb 23, 2009
I installed fedora10 on my system with live cd.I started httpd service.I also set static IP address, subnetmask and default gateway as my proxy server.It is only accessible through http://localhost at the same machine.but I need to access it through http://ipaddress/ on my other LAN machines which has window operating system.
View 8 Replies
View Related
Feb 19, 2009
I am thinking about writing a script to search through specific folders on a Linux based server (Centos 5) and report any changes made to any file on that server.Like a detailed change log with the date it was changed and the difference in size. Dose anyone know if such a script exist?
View 2 Replies
View Related
Mar 8, 2011
i am a new user of ubuntu and also new web designer. I have installed apache2 server and the network name is "localhost" by default so here is my question how can i change it to a name that i want and also how can i change the default domain name to a domain name that i have registered so that everyone can reach my website...
View 3 Replies
View Related
Mar 24, 2010
I have Fedora 12. I just wanted to know that for demonstrating a DNS mechanism between clients and a host, how to establish a domain ? Do I have to configure an Apache server ?
View 1 Replies
View Related
