Fedora Networking :: Apache Listen To Assigned Port 80
Aug 29, 2010
On Fedora 13 is there anywhere else on the system that I have to change to get Apache to Listen to an assigned port, something other than 80. Suppose for instance I wanted Apache to Listen on port 94. I told by the site that their router is forwarding apache to port 94. That doesn't mean I change the Listen in httpd.conf. correct. Apache is still expecting connection on port 80 but in this case 80 then gets forwarded in the router to 94. This is my understanding.
View 5 Replies
ADVERTISEMENT
Aug 7, 2010
When I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
View 2 Replies
View Related
Feb 12, 2009
I make an application on GNU/Linux which listening on a MULTICAST stream, so I open my unconnected socket, bind it on a MULTICAST address and a port, join the multicast group with the "setsockopt (IP_ADD_MEMBERSHIP)", then I receive datagram on my socket.
Now I've two different instances of the same application that run with their own MULTICAST address and port. And what I found strange is that, after a misconfiguration, I switch the ports, for example:
Emitting on 225.0.0.1/23451 and 225.0.0.2/23452
Receiving on 225.0.0.1/23452 and 225.0.0.2/23451
And my receiving part doesn't care about the MULTICAST address, it looks like the socket is listening on the port number only! I mean that the receiver [225.0.0.1/23452] take its datagrams from emitter [225.0.0.2/23452] and vice-versa!
View 2 Replies
View Related
Jan 30, 2010
I tried searching and tried different things and have failed miserably. What I am trying to accomplish is have postfix listen on port 587. I have read that I should do this using Linux Firewall rules as to not mess with postfix config. Here's what I have in my ip6tables.
Code:
iptables -t nat -A PREROUTING -p tcp --dport 587 -j REDIRECT --to-ports 25 However, when I restart ip6tables I get unknown arg --to-ports
View 11 Replies
View Related
Jun 7, 2009
I am trying to figure this out and it seems I can't So, I have a server which hosts various domains, each domain with multiple subdomains. All websites are set up with "VirtualHost" and they all work properly.The problem I'm having is that if I enter any subdomain of the main domain, I can still reach the webpage.Is there some way of telling apache to DROP / display a forbidden message for all subdomains which are not listed in the VirtualHosts?
View 14 Replies
View Related
Jul 20, 2010
I tried to make "ssh tunneling", but failed and got this message.
Quote:
Administrator@windstory-PC /
$ ssh -R 7869:localhost:7869 windowsstudy@192.168.0.4
windowsstudy@192.168.0.4's password:
Warning: remote port forwarding failed for listen port 7869 Last login: Wed Jul 21 01:56:04 2010 from 192.168.0.2 -bash-3.2$
1. system environment
192.168.0.2 - windows 7 + copssh
192.168.0.4 - centos 5.4 x86 + openssh
2. Guide for setting "ssh tunneling"
[URL]
3. Added this to sshd.conf
Quote:
AllowTcpForwarding yes
4. "netstat -na|grep 7869" at 192.168.0.4
Quote:
[root:maestro:~]# netstat -na|grep 7869
tcp 0 0 0.0.0.0:7869 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:7869 127.0.0.1:53539 ESTABLISHED
[code]....
5. result of "ssh -vvv -R 7869:localhost:7869 windowsstudy@192.168.0.4"
Quote:
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
[code]....
6. I added 7869 for telnet service as follow;
Quote:
mytelnet 7869/tcp # My Telnet server
View 1 Replies
View Related
Feb 7, 2010
I am setting up Apache (Fedora 12) inside my home network. From inside my home network I access it without any problem. I need to set it up to access it from internet. I have the following questions. Here is temporary setup for testing purpose.
Internet-->ADSL modem (SEIMENS Speed Stream 4200)---> Apache (Fedora 12)
1. Do I have to do any kind of ports forwarding on ADSL modem. (There is no option to do port forwarding on Modem) May be I need different Model of Modem??
2. I tired to Ping my real IP for modem form another computer from internet. I am even unable to PING the ADSL 's real IP. Why it is that?
View 6 Replies
View Related
Jan 16, 2011
I just installed KVM on a new system and just found out the hard way that virt-manager cannot be installed on the same machine because of a library conflict, so I will have to manage my VMs from another machine. I will use a SSH tunnel to forward the port, but I don't know what it is. Also, how do I start KVM?
View 4 Replies
View Related
Jun 10, 2011
How to find the Address which is already in 2632 port?
View 1 Replies
View Related
Feb 18, 2010
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
View 10 Replies
View Related
May 23, 2010
I'm running Ubuntu 9.10, and am trying to get proftpd to listen on a port other than 22. I've modified the proftpd.conf file, as well as adding the desired port to my /etc/services file, yet if I try anything other than port 22, the connection is refused.
View 3 Replies
View Related
Feb 6, 2011
It appears that X Windows under Ubuntu (or Gnome?) is started to listen to a Unix named socket, instead of a TCP port number, for client connections. That's what SSH is forwarding when it does X forwarding. I need to start X applications on a remote machine, and then close the SSH connection. So I need to make the connections directly. This is within a LAN on private IPs, so security is not an issue. I searched on help.ubuntu, but there appears to be no particular document that covers this. Anyone know where this is configured to enable it to listen on a TCP port like the usual 6000?
View 6 Replies
View Related
Aug 20, 2009
Can't seem to access my squid server on port 80. I have port 80 allowed in the conf for this IP. apache is listening to port 80 but only on the 2nd IP. iptables is allowing through port 80 incoming nmap shows no ports open on 80 though:
Code:
Starting Nmap 5.00 ( http://nmap.org ) at 2009-08-20 11:19 BST
NSE: Loaded 0 scripts for scanning.
Initiating SYN Stealth Scan at 11:19
[code]....
View 8 Replies
View Related
Dec 30, 2010
I wish to use the VNC server built in to the Ubuntu to easily access it from other computers on my local network. I need to skew the VNC Server port off of the normal 5900 to something else because I am using VNC to access several computers (sometimes simultaneously) so each VNC server needs to be set with a different port #. At this point it is all local subnet connections with no incoming internet access and I am not worried about security.
View 2 Replies
View Related
Apr 16, 2011
I would like to listen to a virtual serialport (dev/ttyACM0). I heard you can this with the terminal in Linux. But how? Does anyone know some commands?
View 2 Replies
View Related
Apr 14, 2010
I've killed apache via /etc/init.d/apache2 stop, but something is still listening on port 80:
Code:
root@www:/etc/apache2/sites-enabled# netstat -an | grep LISTEN | grep 80
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:8022 0.0.0.0:* LISTEN
unix 2 [ ACC ] STREAM LISTENING 5806 /var/run/mysqld/mysqld.sock
How do I find out that program this is?, or how to I stop it listening?
View 3 Replies
View Related
Jun 6, 2011
I am trying to get apache to listen to specific IP address and I have read up of the listen command (http://httpd.apache.org/docs/2.0/bind.html) I can get virtual sites to work but not the apache it self.
View 5 Replies
View Related
Jul 17, 2011
I have (at least 4) native USB ports that contain flash drives. I know that the /dev/sd[abcd] devices are created in the order they were inserted, but say you have all four plugged in at boot time, or further, they can be plugged and unplugged in real time. At times, /dev/sdf, /dev/sdg, etc. are created as well. I'm ignoring external hubs for now.
I need to know which drive is plugged into the "top port on the front panel", etc, by physical location. From dmesg I can check right after booting and get the physical assignment of a PCI device, say, PCI 0000:00:10.3, as being assigned to the EHCI usb bus. From /proc/bus/usb/devices, and the "T:" field, I have learned that the physical connectors I'm interested are known as USB Bus 1, Port=00, Port=01, Port=04, and Port=05.
From lsusb I can see all sorts of information from the USB point of view, but with no /dev/sd references.
From /proc/scsi/scsi, I can see what scsi devices have been created, with a count consistent with the number of flash drives plugged in, but no USB data.
So, I can get lots of information from the USB storage point of view, and lots of information from the SCSI point of view, but nowhere can I find how to correlate them. In other words, if I want to mount the drive plugged into a given physical slot, how can I find the /dev/sd device I need to mount? udev isn't really interesting here, because I'm just looking for the information that udev would use to answer the same question.
I've done some heaving exploring in the /sys and /proc filesystems and have not yet found where the USB and SCSI worlds intersect.
The closest I have found is (where "Port" is the physical port number from above):
This seems to have some mapping to the physical port and references a "/dev/sd[a-z]" value, but I don't know how reliable it might be, nor do I know if my having to increment that physical port by 1 is meaningful. Anyone have a simpler approach?
So, my goal becomes
mount /dev/<sd that was created for the top slot> /mnt/top
mount /dev/<sd that was created for the bottom slot> /mnt/bottom etc.
View 2 Replies
View Related
Apr 6, 2010
How can I set my server to listen at a different port for http access. I would like to use port 8080 (to circumnavigate isp blocks). Also can I do the same thing for sftp connections?
View 3 Replies
View Related
Mar 1, 2010
I was just wondering what I have to edit in order to get Maia Mailguard to listen on port 443 instead of port 80
right now I am logging on with [URL] but I would like to connect to [URL]
View 1 Replies
View Related
Mar 21, 2009
I have been struggling with this for the past two days and I can't seem to figure it out.SIMPLE GOAL: use subdomains with my wildcard Rapid SSL cert on Apahce2. This is not a chained certificate.Currently my default SSL virtual host, listening on 443 works fine. So, https://www.myDomain.com is recognized correctly by all browsers. But, the below virtual host listening on port 1025 is not coming across to the browser securely. The page renders, but the browsers do not see it as encrypted SSL.
View 1 Replies
View Related
Nov 11, 2009
I have made out a little software as to talk with my friends through network . there are two parts : one is listening to receive messages ,the other will send messages. but the firewall is bothering .so I want to know if I can make my software listen to port 80 while apache is also running .
View 11 Replies
View Related
Aug 14, 2009
I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies
View Related
Mar 31, 2011
I have been issued 16 IP's my my ISP. Obviously my subnet is 240. is there a way I can take one or any of those IP's and somehow make them into their own network on my end? Really what I am wanting to do is take my 2 DNS servers that are really on the same network far as my assigned subnet and IP's, but take at least one of those IP's and sub-network? it out to the other DNS so it appears to be on another net work. like just simply assign it 192.168.219 255.255.255.255 or something like that.
View 10 Replies
View Related
Sep 18, 2010
I'm trying to assign like 80 IPv6 addresses on eth0 for virtual webhosting, but after 55 addresses I get the following error:# ip addr add 2a01:9f8:a171:1651::4b:a8af dev eth0 RTNETLINK answers: File exists.What's the problem? I don't understand that error message at all. Is the number of IPv6 addresses per device somehow limited?Ubuntu 10.4.1 server, 64 bit.
View 1 Replies
View Related
Mar 23, 2011
I'm running Ubuntu Server 10.10 on a 64 bit laptop (also have GNOME installed just for convenience), and have a website up using apache2. I am wondering if it is possible to configure both eth0 and wlan0 to the same local static IP address? I would like to walk around my house and do stuff when I want and still have the website accessible, but also be able to jack my laptop back into the router when I am away, just for peace of mind.
Is this possible? If it is, do I need to do some configuring in apache2 to tell it to use another device? Is this even a smart way to get what I want done?
View 2 Replies
View Related
Feb 8, 2011
I have 2 ubuntu PCs, which are connected to the internet without an external IP (behind NAT). How can I access one from another?
View 3 Replies
View Related
Oct 13, 2010
I can't seem to get apache to work on a non default 80 port. I've got in to ports conf and changed it to the follwoing.
Code:
# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default
# This is also true if you have upgraded from before 2.2.9-3 (i.e. from
# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
# README.Debian.gz
[Code]...
View 3 Replies
View Related
Mar 25, 2011
I'm running a server with Ubuntu 10.04 installed. I recently set up a VirtualHost (I'll call it my.website.com), like I have in the past without any problems. But this time, I'm stumped. When I connect to my.website.com, it should hit port 80, right? It doesn't; rather, it hits port 8000. I don't have any rewrites/redirections (I checked wherever possible) and checked apache2.conf (httpd.conf is empty).
View 5 Replies
View Related
Mar 13, 2010
Do any one knows how to ping global inet6 addresses assigned between two systems. I assigned inet6 address through "ip addr add 2001::4 dev eth0" and similarly 2001::5 in another machine and tried to ping 2001::5 from 2001::4, but it is showing,
sait87@static-host:~$ ping6 2001::5
connect: Network is unreachable
Do any one knows solution for this problem.
View 2 Replies
View Related
