General :: Client Unable To Listen To NIS Domain Server
Apr 15, 2010
Client unable to listen to NIS domain server.I have configured an NIS server, which is working fine.I then configured an NIS client to share some like passwd, shadow, etc.By default the client was trying to communicate to the NIS server using the broadcast method..However if I restart the client computer, it fails to communicate or Listen to the domain server. Once I login to the pc, I then check the /etc/yp.conf file and it switched back to the broadcast method.Is there any way that I can make this entry: domain naman.com server station51.naman.com permanent so that even after the reboot it should communicate using the client-server connection rather than the broadcast connection.
There seems to be some problem in my dns server. The configuration is perfectly ok.But what happens sometimes is, it couldn't resolve some domains sometimes.After restarting the named,it again resolves the domain. whats happening on my dns server
In a newly installed Linux machine which is a client machine, is not listening to NIS domain server even after setting IP address ,default gateway,and subnet mask.What are all the changes to be done in configuration file.And how can be solved
I am trying to figure this out and it seems I can't So, I have a server which hosts various domains, each domain with multiple subdomains. All websites are set up with "VirtualHost" and they all work properly.The problem I'm having is that if I enter any subdomain of the main domain, I can still reach the webpage.Is there some way of telling apache to DROP / display a forbidden message for all subdomains which are not listed in the VirtualHosts?
I have two linux machines (machine1(rhel client) and machine2 (rhel server)). I am able to login the machine2 from machine1 but I am unable to ping machine1 from machine2. Firewall is stopped in both machine.
I want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
I have set up DNS server set up on my RH 5.5 system. It is working perfectly as Caching only Server but but when i tried to make it a primary server for a zone it didn't resolved. I am actually a newbie so please correct me if i am wrong somewhere. Here are my configuration files code...
We're still using an NT Domain Server, and Samba is already configured properly. But the problem is if the shared folder is configured in samba to be accessed by group and not the domain username, authentication fails even if the user is member of the group.
I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
My question is: 1] i am able to send mails to localhost or any user of localhost..through any user... 2] able to send mails to extrnal domains like gmail yahoo rediff etc..
I am unable to send mail in internal domain..detail..Main mail server is exchange i configured 1 sendmail and another machine for nagios this both machine are not sending mails to me or on my domain mail id..
i have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
I've setup an NFS share on my Fedora 15 host of which Google'ing told me that it had changed radically from the old NFSv3 config. Ie. no more /etc/hosts.allow or /etc/hosts.deny files.....My current setup is this..../etc/sysconfig/nfs:
I have configured LDAP server on RHEL 5.2 Linux. Client is unable to change its password from client linux box. I think there is PAM configuration problem in /etc/pam.d/system-auth file. What will be the exact entries in this file.
I have done a basic installation for a server.And then I have removed the screen and the keyboard because I have no place for them.I manage the server from my laptop using NX.I am using the root user account as nx user because I can't stop the server with a normal user.
I have configured the postix email server in Centos. Its working fine with Squirrel mail client. But If I configured in microsoft Outlook. it is working. with this post I have attached the error message. Please let me know solution.I am getting this error message while I check the SMTP authentication in outgoing server tab on outlook account setting configuration.If I send any email It will bounce and came to to inbox
iam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
I have an old box, running Ubuntu 10.10. Mostly to be able to use internet and listen to music in my workshop. In the beginning this computer worked just fine. My Acer AL1912 was detected properly and screenresolution was automatically set to 1280x1024. When looking in system=settings=screens the monitor was detected as a Acer 1912. For some reason I brought the computer over to another place and that other monitor (an Eizo) was also properly detected. Resolution changed automatically to 1912x1280.
Now, when I have moved the computer back, all monitor settings are completely lost and I can't seem to be able to change them. I am stuck on 1024x768 and the monitor is detected as "unknown". I have tried to change the values for resolutions in monitor.xml but the values revert to 1024x768 (which look quite fuzzy on my screen. So my short question is: Is there anyway to completely restore the monitor-/screen settings in Ubuntu 10.10 so it will autodetect my monitor properly again?
I have one major problem in my mail server. I am not able to send mail to other domain yahoo and rediff. and my ipaddress is blacklisted. So Finally I checked logs. Mail queue is high. Log shows spam and junk mail created in my mail server. he following are the logs. Iam using qmail server. One more thing is in link is there when I click that link its go sex websites. I will try all mail queue logs. It shows the same website redirection. So I don't know its happen. My thought is spam create from that website.
I can successfully connect to a remote Windows Computer using Terminal Server Client but I cannot save the profile (Fedora 12).This means I have to enter the details every time I wish to connect. As I have many different remote locations I need to access on a regular basis is there any way to save the profiles?
When I try to connect to the share from my XP machine, I get a "network path cannot be found" error message.
Below is the entry in /var/log/samba/samba.log
[2008/11/19 11:57:51, 0] smbd/service.c:make_connection_snum(1003) '/server2/test' does not exist or permission denied when connecting to [server2] Error was Permission denied
Here is my smb.conf file:
[global] # Server name server string = Intranet Server (Primary)
# These are the default password settings. ; encrypt passwords = yes ; smb passwd file = /etc/samba/smbpasswd
# Define NT domain/workgroup name. workgroup = intranet
# Security mode. (See SAMBA documentation for details.) ; security = user
# Restrict conections to specific IP addresses. hosts allow = all
# The %m variable sets a separate log file for each # connecting machine. # log file = /var/log/samba-log.%m # Keep it basic - one file! log file = /var/log/samba/samba.log
# The number of minutes inactivity before a connection is # disconnected. (This disconnection should be transparent to most # clients, which an have auto-reconnect feature. Removing inactive # connections is to preserve the server's resources.) deadtime = 10
# These socket options are suggested in the default smb.conf file. # Who am I to disagree? socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Define both Ethernet interfaces. (Otherwise, I suspect only one # will be configured??) interfaces = eth0 eth1 username map = /etc/samba/smbusers ; guest ok = no ; guest account = nobody
I'm trying to set up an openSUSE 11.2 host as NIS client and I would like to knowwhether or not it can be client of two (or more) NIS domains. The reason is thatsome users are authenticated on server1 (nis-domain1) and some others on server2(nis-domain2).Trawling the web, I found a HP document stating that a client can belong to one NIS domain only. However, the yast NIS client interface allows adding NIS domains/servers to the seemingly default one. I'm totally confused.I made the following experiment:1. declaring nis-domain1 in /etc/defaultdomain and server1 in /etc/yp.conf: ypwhich returns server1, ypcat passwd lists the users on server1.2. in the yast interface, I added nis-domain2 and server2; in /etc/yp.conf, there is an extra line "domain nis-domain2 server server2". After reboot, ypwhichreturns server2, ypcat passwd lists the users on server2. But now the maps from server1 are no longer available.
i need to allow window domain controller user to use file share of linux.windows DC user can see the share file and directories of linux file server but not able to access.
below is brief--
I have a Linux machine which is on my network but not on my domain. I have configured SAMBA FILESERVER for file sharing purpose. I have a Windows XP PC which is on the domain(windows server) that I am trying to connect to a share on the Linux box. I supply my credentials but regardless of which login I use I always get Logon Failure. I have created an account on the Linux machine with the same user name and password as my domain account but so far no luck. Can I connect from a domain PC to a non-domain Linux box? Is there something else I should be checking?
I'm working for a smallish non-profit that has gone through some recent growing pains. We have two sites that are currently without a domain controller, and no money for MS licenses, so I was thinking of trying to add a couple of additional Linux machines (we already run Linux for web services internally, and I've set up a test case previously to see if I could get a server to join the domain, which was a success) and was trying to find out if I can get them to act as Domain Controllers without replacing the domain. The main issue that I'm having at those locations is drive mappings are not happening correctly against our DFS file servers. The one other location that had this issue had it go away when we added a local DC. The domain is a Server 2008 domain.
