Fedora Servers :: Configure Dovecot To Use Domain Name As Well As Part Of Username?

Jul 14, 2011

I installed Postfix, Roundcube (webmail) and Dovecot. Postfix stores the e-mails in maildirs located at /home/postfix/maildir/[user]@[domain]. Now I set the mail_location configuration option in Dovecot to: mail_location = maildir:/home/postfix/maildir/%u@%d The problem I run into is logging in with [user]@[domain]. Right now I can only login with [user] (without @[domain]), which makes the mail_location invalid (no e-mails can be found). How could I configure dovecot to use the domain name as well as part of the username?

View 8 Replies


Server :: How To Access Local Part / Domain Part Of Email Address In Postfix's Main.cf?

May 24, 2010

I'm trying to figure out how to access the local part and the domain part of an email address in postfix's main.cf. For example, myname@mydomain.net has myname as the local part and mydomain.net as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.

View 2 Replies View Related

Software :: Server Hosting Different Part Of Web Site Must Appear As Part Of Domain

Jul 13, 2009

we have access to one domain name , 1 internet ip address and may servers hosting different part of site. I want them all to be accessed via same web site . some of the server in our network are embedded devices.they have their specific utility being hosted on that machine. So the severs are bound to be distributed . I just wanted to know how can I access them via single ip, domain name.

View 6 Replies View Related

Ubuntu Servers :: Way To Configure Dovecot For Auto-Reply Out Of Office Messages?

Jul 5, 2011

Does anyone know of a way to configure dovecot for Auto-Reply Out of Office messages? Preferably one that clients can do on their own from their PCs.

View 1 Replies View Related

Fedora :: Configure Postfix And The Dovecot?

May 27, 2010

I have configured Postfix, mysql and Dovecot according to following guide. [URL] My issue is When I'm Install dovecot ( using yum command). it Didn't create a "/usr/lib/dovecot/deliver" folder.Then my mail.log trace this error message


May 27 16:36:02 localhost pipe[26056]: fatal: pipe_command: execvp /usr/lib/dovecot/deliver: No such file or directory May 27 16:36:02 localhost postfix/pipe[26055]: CE9768FED3: to=<john@example.com>, relay=dovecot, delay=26, delays=26/0.02/0/0.02, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/lib/dovecot/deliver: No such file or directory )
After that I have create "/usr/lib/dovecot/deliver' folder. Then I have set permission using follwing command.


mkdir /usr/lib/dovecot/deliver
chown vmail /usr/lib/dovecot/deliver

Now My log file trace this message


May 27 19:26:52 localhost postfix/pipe[30111]: E178F9000E: to=<john@example.com>, relay=dovecot, delay=388941, delays=388941/0.02/0/0, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/lib/dovecot/deliver: Permission denied )

how to set permission for this? Or My configuration is wrong?

View 6 Replies View Related

Fedora :: Configure Gdm To Prompt For Username?

Jul 17, 2009

Anyone know how to configure GDM 2.26.1 to NOT display the list of users, but instead just prompt for username and password?I tried the following (as normal user and also as root):

gconftool-2 -s /apps/gdm/simple-greeter/disable_user_list -t bool true
Then, I queried the value as follows:


View 2 Replies View Related

Ubuntu Servers :: Configure To Send And Receive Mail From Multiple Sub Domains Of Domain?

Jun 14, 2011

I want to configure a single mail server to send and receive mail from multiple sub domains of my domain. I've already installed Postfix/Dovecot and it is perfectly working for mydomain.com. And also installed roundcube for Web Mail. Can I further customize this setup to process mail to sub domains? ex- someone@subdomain1.mydomain.com, someone@subdomain2.mydomain.com, someone2@subdomain1.mydomain.com (someone@subdomain1.mydomain.com and someone@subdomain2.mydomain.com are 2 separate users. they should be able to log on to web interface separately)

Currently i use system account names as email user names. (ex - systemusername@mydomain.com). The only MX record in my domain DNS pointed to current server (mailhost.mydomain.com). I read about postfix virtual domains. but couldnt figure out how to use it to achive my target. I do not need configuration details. Just explain me the way to do it. I can do the rest my self.

View 1 Replies View Related

Fedora Servers :: Dovecot Stopped To Authenticate / Why Is So?

Jul 13, 2009

This happened during the bump from 1.1.4 to 1.2.0 (in F11), but now nobody can login into the mail server.

The strace of dovecot-auth says that it sends messages over an AF_NETLINK socket before failing. Why in the world would it do that?

View 2 Replies View Related

Fedora Servers :: Dovecot Stopped Getting Localhost Mail?

Oct 23, 2010

Last time I rebooted, sendmail & dovecot started from init and everything worked. I needed to reboot this weekend [new videocard] & yum had given me a new kernel etc.Now. running Thunderbird - with 2 accounts chuck@otherserver.com and chuck@localhost.
The "otherserver" account works fine. Localhost won't pull in the mail.

/var/log/maillog says
dovecot: pop3-login: Login: user=<chuck>, method=PLAIN, rip=, lip=, secured
dovecot: POP3(chuck): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0


View 2 Replies View Related

Fedora Servers :: Email Sender Address - Postfix / Dovecot Etc

May 21, 2009

I have an email server configured with postfix, dovecot, saslauthd and squirrelmail. It works great. In fact I'd even say it works too well: in squirrelmail, I can configure any sender address and my server will accept it. Message will be sent, wether the sender's address is [URL] or [URL]. Is there any way of limiting it in such way that only [URL] is accepted as sender's address?

View 6 Replies View Related

Fedora Servers :: Dovecot Errors On One User Authentication Failure

Apr 28, 2011

I am new to to dovecot and would like some help, so please be kind.I have one user that can send mail but not read it either by pop3 or imap.I am running Dovecot 2.0.11 on Fedora 14.

View 2 Replies View Related

Fedora Servers :: Fedora 10 - Sendmail / Dovecot Relay

Jun 7, 2009

I am trying to setup sendmail on a fc10 box with dovecot running imap. I have everything configured and running on the server. For example, when I run "echo 'test' | mail -s test user@mydomain.com" or even to someuser@gmail.com, the mail goes through just fine. I can then reply from both of those accounts back to the server, no problem.

Relaying denied Cannot send mail. The SMTP server does not recognize any of the authentication methods supported by Entourage. Try changing the SMTP authentication options in Account settings or contact your network administrator.

View 10 Replies View Related

Fedora Servers :: Retrieving Mail From POP3 Boxes And Inserting Into Dovecot?

Apr 28, 2009

I have recently set up a mail server running dovecot and everything is fine. However, I now want to retrieve the contents of 2 pop mail boxes and insert them into the IMAP structure under dovecot. I need to check for spam and sort them according to sender and recipient.

What is my best software option for retrieving the mail?

View 3 Replies View Related

Fedora Servers :: No Installation On Part Of Client

Apr 13, 2009


1) Can be integrated into web browser (so when click on chat the a window will open for chat with technical support executive:- It will be basically used for TS)

2) Must Have option to transfer file between costumer and TS execut

3) No installation on part of client

Basically it chat support as any other company on net... Like Symantec and all(Not That big thought)Any one know or have experience in this(setting up is relatively simple for me i need info on any particular software that i should try)Currently thinking about experimenting with ejabber... If that a bad choice i will loose lot of time and be behind schedule by miles.

View 3 Replies View Related

Fedora Servers :: SSH Unable To Get Context For Username?

Jul 13, 2010

I looked for a little and everyone's problem similar to this it seems they are tunnelling for a vnc server of some sort. I am just running ssh and it fails not only from the machine, but also remotely. The username "lee" is in group "sshusers"I have two machines setup the same, as to my knowledge. In one server I can access ssh and everything works well but when I try to ssh into the other one it gives me this

[lee@localhost ~]$ ssh -p5912
lee@'s password:


View 5 Replies View Related

OpenSUSE Network :: Unable To Find Away To Log In Without Appending Domain Name To Username

Jun 4, 2010

I have ldap authentication working and the machine is joined to the domain, but I have to append the domain name to my login every time I log in. example: user@domain.I've been unable to find away to log in without appending the domain name to the username. Any ideas on how I can force the machine to automatically append the name for me?

View 2 Replies View Related

Fedora Networking :: Configure Sendmail To Send Email From Command Prompt To Any Domain?

Jan 21, 2010

I have an issue with sendmail. I need to configure sendmail to send email from command prompt to any domain. This is just for the notification purpose. I installed sendmail and sendmail-cf and sm-client. The following are the configuration I have done.

1) dnl # DAEMON_OPTIONS(`Port=smtp,Addr=, Name=MTA')dnl
2) m4 /etc/mail/sendmail.mc > /etc/mail/sendmail.cf
3) /etc/hosts = localhost.localdomain
/etc/hosts = mysystem
4) /etc/hosts.allow = sendmail:ALL

View 1 Replies View Related

Ubuntu Servers :: Unable To Setup The Domain - How To Use Two Domain Names

Feb 16, 2011

i have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.

View 3 Replies View Related

Ubuntu Servers :: Active Directory Domain Integration - Allow Domain Users To Authenticate Server And Access File Shares Using Samba

May 13, 2010

The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:


View 9 Replies View Related

Fedora Servers :: How To Set Domain

Feb 8, 2010

I've got my Samba up and running and can goto it through my IP but how do I join our domain so I can connect via my Computer name wich is JONATHAN-SERVER?

View 6 Replies View Related

Ubuntu Servers :: Users On The Machine Can Login Into Vsftpd With Their Username And Password On The Machine And Go To Their Root Dir "/home/username"?

Nov 3, 2010

I recently installed vsftpd on my server. I noticed that users on the machine can login into vsftpd with their username and password on the machine and go to their root dir "/home/username".Now, I want to give some people a vsftpd username and password so they can upload and download files and folders to their folder, but this folder has to be in the "/var/www/(username)" folder. I don't want them to be able to go to any other folder than their own folder like "/var", "/etc" or "/home" etc. Also I don't want them to be able to login on the machine as a user, through putty for example. They should only be allowed to acces their folder with vsftpd, nothing else.

View 1 Replies View Related

Fedora Servers :: Setting Up Tomcat Per-user (/home/username/public_html Executing Of JSPs)?

Mar 8, 2010

I'm sorry if this has been posted already but I REALLY did look and couldn't find the same issue(s) addressed anywhere. Similar, but not similar enough, in my opinion, to barge in and switch the subject.

Ok, I have Apache httpd set up so I can use a public_html folder inside of my /home/username directory. Now, I'm about to take a web dev course that teaches JSP/Servlets for building web applications and I'd like to set my environment up so that I can execute .jsps from my web root (/home/username/public_html) just like I would a CGI or PHP script. I have a web host that will give me JSP support for a few extra bucks a month, but I'd rather do it locally... and free.

I have Tomcat installed and running wonderfully. The test page and all the examples work fine and execute immediately. But when I try to execute a .jsp file inside of my web root (/home/username/public_html) I just get the raw Java tags and plain-old HTML rendered in my browser. I pretty much knew that wouldn't work; that'd be way too easy. I just wanted to see what would happen.

I looked through all the tomcat ".conf" files I could find to see if it was similar to setting up httpd inside of my home directory, but I didn't have any luck. It's not a file permissions problem... I've been messing with web "scripts" long enough to check that the files are executable. All of the files needed (borrowed from the examples that come with Tomcat) were in their correct paths inside of my web root, as well. Added :8080 to the end of localhost (like you do to see the Tomcat test page(s) instead of the httpd test page) but that didn't help.

I scoured the web for directions but could only find one solution that was Ubuntu-specific (just install tomcat6-user-something-or-another.deb, which doesn't exist in the Fedora repos), then I looked around here, trying every search term that seemed reasonable to me, and I can't find anything.

I realize I can just write the code and put it in a directory that does allow these things to be executed (var/lib/tomcat6/blah-blah-blah/going-by-memory) and run them from there, but I'd like to be able to just keep all of my web files in the same place; a place where I have full permission to do whatever I want... my home directory public_html.

Is this possible (has to be, right?)? Is this a dumb idea to begin with (I'm prone)? What is the best way to develop JSP/Servlets without having to deal with permissions every time I want to put a new script in a directory outside of my home directory that's already set up to allow the execution of said script?

View 3 Replies View Related

Fedora Servers :: Where To Get Domain Names?

Dec 28, 2009

I'm going to be setting up my own server soon, but have some questions...

Where do you guys recommend I get a domain name from?

I have looked at GoDaddy for now. Any suggestions?

View 14 Replies View Related

Fedora Servers :: Point Two Different Domain To System?

Feb 25, 2009

I have problem with our fedora 8. We have two different domains. So i want to point these two domains to my fedora system but should not go to the same document folder.ecause these are different websites. I tried maximum but i didnt get correct solution.

View 1 Replies View Related

Fedora Servers :: How To Limit Emails Sent Outside Domain

Aug 27, 2011

How to limit emails sent outside my domain or from a user in my domain with postfix to a valid user? i.e., bob can't send email as jane both from my domain and neither can send email to bob@hotmail.com as someone other then themselves. Using postfix with dovecot authentication through mysql.

View 1 Replies View Related

Red Hat :: Configure Kannel For Multiple Username And Password?

Aug 3, 2010

I am using Red Hat 5 and kannel for SMS solution. My question is
How to configure kannel for different user names and passwords. So that we can submit SMS to kannel using any one of the username. Also we need to keep record of SMS according to user name via it was submitted to kannel..? Please guide me for the same.

View 2 Replies View Related

Fedora Servers :: Apache - Listen Only On Specific Domain?

Jun 7, 2009

I am trying to figure this out and it seems I can't So, I have a server which hosts various domains, each domain with multiple subdomains. All websites are set up with "VirtualHost" and they all work properly.The problem I'm having is that if I enter any subdomain of the main domain, I can still reach the webpage.Is there some way of telling apache to DROP / display a forbidden message for all subdomains which are not listed in the VirtualHosts?

View 14 Replies View Related

Fedora Servers :: Unable To Reach Web Services Through Domain Name

Jan 29, 2011

i have installed apache and bind on my server and i've also registered a dynamic domain through dyndns as jan27.dyndns.biz. i am able to successfully host my own webpages using this method.

then i registered a domain name (lets call it "blah.com") through namescheap.com and have registered my nameserver to my ip address. after reconfiguring the my external zones in bind and restarted my services, i am unable to reach my webpages through the new domain name.. www.blah.com and blah.com would lead me to a opendns.com page but interestingly ns1.blah.com loads my webpages successfully.

View 8 Replies View Related

Fedora Servers :: Set Up A Local Domain To Redirect To A File In OS?

Mar 15, 2011

I'm trying to set up a framework where people connected to same wifi connection can enter a local site for developing purposes.I want them to be thrown to a local copy (development copy of the site) when they type in www.development.loc in the browser.I don't want to connect the world, only people connected to my wifi.Anyone willing to help by stating what I need to edit to :1. Allow me to access local copy of site that's on computer (located : /var/www/developmentsitename/) using www.development.loc in browser./and2a. What do I edit to create the server accessible by other computers connected to same wifi connection. 2b. If another computer can connect to this site now, can we create a virtual desktop setting in which workers can work as if they have their own partition on the server to work on and upload work onto the development server.

View 2 Replies View Related

Networking :: Configure Proxy - Access Username And Password

Mar 3, 2010

i am after proxy server, i add the proxy server access username and password


it said the export is succecefully done, but after trying to install something using yum, its give me this [root@locVirtual-linuxtest etc]# yum install samba


View 2 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved