i have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
View 3 RepliesI have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
I'm going to be setting up my own server soon, but have some questions...
Where do you guys recommend I get a domain name from?
I have looked at GoDaddy for now. Any suggestions?
I'm using Ubuntu 10.4 box with Apache2 web server. I have a site with several Domain Names. How do I set up tracking?
View 1 Replies View RelatedFor clairification, I can ping. I have tried several IP addresses and 100% success rate. When I noticed the problem I was trying to run sudo apt-get update && apt-get upgrade After some time I noticed these error messages to start with
[Code]
I tried to ping the adddress security.ubuntu.com from my Windows machine to verify that I could connect and was surprised when I could. I then pinged the address 91.189.92.167 which is what my windows machine resolved the name as and it went though.
My thoughts on this are that when my Ubuntu Router came up, for some reason it did not incorporate the ISP's DHCP servers into the ip address it obtained. Sadly I know to view ALL IP infomation in windows via ipconfig /all command but I do not know what this is in the *nix world. need commands that I can use to check and troubleshoot this apparently DHCP issue so I Can start to update my server and expand on its services?
I have been logging into a server remotely and trying to set up a mailing list on it. The server is the newest version of ubuntu server: uname -a: Linux Themis 2.6.28-11-server #42-Ubuntu SMP Fri Apr 17 02:48:10 UTC 2009 i686 GNU/Linux.I noticed I could not download packages with apt-get or ping domain names, and I can't even ping 127.0.0.1.And do you think there is something wrong with the network card?
View 9 Replies View Relatedi am having mail server. im using sendmail.but it is not able to send to certain domain names....mails are getting back with the following errors
this is from logs
[code]...
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies View RelatedThe company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies View RelatedI have regged a Domain on CO.CC
Is it possible to setup an email server for that Domain on my Ubuntu box?
like: user@domain.co.cc
All for free?
I am thinking about buying a domain name and hosting my web server.
I have seen pricing from $8 to $30 a year. Any favorites from fellow ubunters? Also this whole "whois" thing scares me, if I am correct my information I enter when buying the domain is enter into some big pool of information. People can find this information out and dig up important information. url Can I prevent this with private Whois or how do I set it up? This website examples some of my fears with this whole WhoIs thing, url whois/Private-Whois.html Does most/all domain registers come with email or just email forwarding or both? How does that work? At this moment, my only question about Web Hosting is how do I get Website Statistics as in: Stats, web analytics, web traffic stats and more? I will be web hosting through Ubuntu 9.10 gnome.
Ubuntu Server 9.10I want to set up my dhcp server to also be my DNS server so do I skip these lines or point them at the same server that the config file is on?
View 4 Replies View RelatedIn the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies View RelatedDoes anyone have a link to a tutorial on how to set up a DHCP server and SAMBA as a windows domain controller? I can't really find good detailed guides by searching google.
View 2 Replies View RelatedI've been configuring a PDC using samba I used this tutorial url as reference. It seems all went well during the installation and configuration not until when I try to join a windows machine to the domain.
Scenario: When the authentication dialog box prompts the username and password of the domain administrator. I supply root as username and its corresponding password. Then I will prompt an error "The user name could not be found. But, I have noticed that when I supply a wrong password of root the it will prompt "Login failure: unknown user name or bad password. It seems that the windows machine was able to recognize the account somehow.
i have installed apache and bind on my server and i've also registered a dynamic domain through dyndns as jan27.dyndns.biz. i am able to successfully host my own webpages using this method.
then i registered a domain name (lets call it "blah.com") through namescheap.com and have registered my nameserver to my ip address. after reconfiguring the my external zones in bind and restarted my services, i am unable to reach my webpages through the new domain name.. www.blah.com and blah.com would lead me to a opendns.com page but interestingly ns1.blah.com loads my webpages successfully.
After a reboot of my VPS, I keep getting the following error when sending email to my domain (hosted on Google Email). I can send to other email addresses but my own. So it seems like postfix thinks all mydomain.co.nz is to be sent internally?
Sep 9 09:25:05 mydomain postfix/pickup[20784]: 0316C3CC68: uid=1000 from=<sidb>
Sep 9 09:25:05 mydomain postfix/cleanup[20806]: 0316C3CC68: message-id=<20100908212505.0316C3CC68@mydomain.co.nz>
Sep 9 09:25:05 mydomain postfix/qmgr[20783]: 0316C3CC68: from=<sidb@mydomain.co.nz>, size=326, nrcpt=1 (queue active)[code].....
How do I tell postfix that mydomain.co.nz is to be sent to Google email server?
Since two days i m not able to browse websites using the domain names but able to ping/browse using IP addressed. I have done the following:
1. Using wireless i m able to get IP address of DNS (8.8.8., Gateway, localhost & router ip address
2. Disabled wireless and connected ETH0 but still the same problem
3. not able to edit resolv.conf
sudo gedit resolv.conf
** (gedit:4179): WARNING **: Hit unhandled case 0 (Error opening file: Input/output error) in parse_error.
[code].....
I have a list of urls like code...
How can I use grep to match the domain names only?
All the urls have a / after the domain. And there are a lot of tlds, not sure how many, the list is quite big.
Is it possible to have one static IP address with a NAT network forwarding each domain name to certain internal/DMZ IP addresses? I know you can do it by port but if both websites are on port 80 can you forward to the corresponding server on the dmz.I ask this because I noticed the website braemere.com.au had to be typed into a web browser and entering the IP which is 202.47.5.7 did not take me to the website.
View 5 Replies View RelatedSo I'm looking to host potentialy three different...sites...I want to call them from the same machine. One is a radio station and the other 2 are just straight websites. So I wanted to know if I had to use different machines to accomplish this or can I alter maybe the http conf file or what. I did find this in the forums but wasn't quite sure if this applied to me. [URL="http://www.linuxquestions.org/questions/linux-software-2/serving-multiple-domain-websites-on-one-server-329914/"http://www.linuxquestions.org/questions/linux-software-2/serving-multiple-domain-websites-on-one-server-329914/[/URL]
View 1 Replies View RelatedI have spent lots of time trying to figure out how to parse the domain part of this file but am stuck.
How should this be approached:
Code:
Code:
The domains need to be parse at a maximum for 4 levels then the remainder will be put the last field.
before i upgrade to karmic i used to visit some local domains like freenas.local.
But after the upgrade the domains doesnt work. I can go to smb://freenas/ but in firefox / chrome or in fstab i cannot use freenas.local ...
I'm new here, so please be gentle! I recently installed F12 64 KDE on my Acer Aspire 1810TZ, could connect to the WLAN router but neither the native Konquerer nor Firefox could open any pages...
resolve.conf has the DNS according to DHCP offer, from command line dig properly resolves the name, ping (e.g. google) works, telnet to domain-name on port 80 works, GET too. When using the browser with the domain-name I tells me "Server not found", tcpdump doesn't display any activity. But when I manually change the domain-name with the IP (received by command line dig) then the browser has no problem how do browsers interact with the network resources of the OS?
I recently installed bind9 on mandriva 2008.1, after having done the necessary configuration.. I still can't find my domain I configured cant ping on other machines on the LAN but can actually ping on any other website on the internet even though name server is configured to point to local machine..... I dont understand what I'm doing wrong.
View 14 Replies View RelatedHere is my scenario and what I want to try and achieve.
I have:
Quote:
Server A = 192.168.1.5 (serverA.home.com)
Server B = 192.168.1.6 (serverB.home.com)
Currently I have serverA.home.com domain name set up using a free dns service online. When I am anywhere in the world I just type the domain name it hits my static ISP IP via the free dns servers online, hits my home router, gets port forwarded to 192.168.1.5 Server A and I am up and running.
Now...
I have bought a second domain for serverB and want it set up like serverA but I am totally baffled on how I can resolve 2 domain names on a single network? I need (somehow) to try and tell the dns servers that when I enter in serverB.home.com it will hit my static ISP IP as above and then hit my home router but then get directed/split to Server B and not to Server A.
Basically all I want to do is name the machines and get traffic resolved to them.
Is there a way you can view all domain names hosted on an IP address using dig or whois? Say if a server is using Name Based hosting??
View 5 Replies View RelatedI want to use single label host names on my local LAN, without using any domain (at least no registered one). My machines should be named in a fashion similar to 'myserver', 'mydesktop' etc. so that i from a browser on any LAN machine may write 'http://myserver', and get the webserver on 'myserver' (so NO domain part, e.g. myserver.domain).
Do i need to create a DNS zone for each host or is there a way to put all host in a single zone, if so; which? Would such a name be considered a root domain?
Howto exclude IP address from caching in /etc/squid/squid.conf of squid 2?
For a domain, I can use:
Code:
acl excl dstdomain domain.net
always_direct allow excl
no_cache deny excl
but howto exclude IP addresses instaed of domain names?