Ubuntu Networking :: Can I Make Calls Using Dialup Modem
Mar 12, 2010I have a dial-up modem in my Laptop.
Also I have a Dial-up line[Base Phone].
Can I make calls from Dialup modem [Making & Answering calls]?
ADVERTISEMENT
Ubuntu Networking :: Application - Make Phone Calls And Send SMS Via Mobile Broadband 3G Modem
May 1, 2011Is there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies View RelatedUbuntu Networking :: 9.10 Where's Dialup Modem On Thinkpad X60s?
Jan 13, 2010Ubuntu 9.10: where's my dialup modem on my thinkpad X60s?
I'm trying to use "GNOME PPP" to connect by dialup, and it complains that it can't find my builtin modem. But XP can, and that's what I'm using at this moment. XP says the modem is on COM3.
I tried using several "/dev/tty*" entries in the GNOME-PPP setup, but none of the ones I tried worked. The GNOME-PPP default is "/dev/modem", but none such is mounted.
Is there some way I can find out where the modem is mounted, if it is? Or else, how can I mount the modem properly and test it?
Software :: Make And Receive Phone Calls With The AT&T's Velocity/GI461 USB Modem?
Apr 7, 2011I've bought the new AT&T's Velocity/GI461 USB modem. This is a nice toy because into one only stick there are integrated all the features that I need,like the GSM/3G/GPS modules. Googling I've found a good tutorial about how to connect it under Debian and about how to control the GPS data. You can read it going here :
[URL]
but what about to make and receive phone calls through the SIM card integrated and the AT commands ? Can someone give some help ? I've attached some documentation. Maybe this can be done using Wammu and/or Gnokii.
[URL]
Fedora Networking :: F12 Dialup Modem Not Working / Fix It?
Nov 26, 2009I have F9, F10, F11 and F12 installed along with WinXP on my desktop PC. I connect to the internet thru 56K dialup modem (USR-5610B). The earlier versions of Fedora, F9, F10 and F11, all can connect via dialup modem.
My F12 installation is augmented with the following rpms - kudzu-1.2.86.2.i686, libwvstreams-4.6-5.fc12.i686 and wvdial-1.60.10.fc12.i686 (and the rpm for USR-5610B modem)
Network Configuration GUI shows ppp0 (Modem) in the Common Active Profile
However, ppp0 does NOT show up in the Network Device Control GUI, AND ACTIVATE and DEACTIVATE buttons are GREYED-OUT.
Ubuntu Networking :: Dialup Modem Connects But Doesn't Load Pages
Mar 10, 2010I had started another thread about this but had a terrible subject line. Others may have this issue.Found the answer deep in the bowels of documentation. My question now is " did version 20 mess this up for everyone with dialup"?
View 4 Replies View RelatedUbuntu Networking :: Dialup Modem Computer As Internet Sharing Gateway To Wireless Access?
Mar 4, 2011I am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code:
lancer@lancer-desktop:~$ ping www.google.com
PING www.l.google.com (74.125.237.17) 56(84) bytes of data.
64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms
64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms
64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
Ubuntu Networking :: Make Calls Over Net With Pstn Phone
Jun 13, 2010I heard it possible to make a call from a pstn phone through the internet to a pstn phone elsewhere in the world. The caller pstn phone connects to something called a pbx[dunno what it is] and a linux box running some software[dunno what it is either] connects to the internet.How do I make that work?
View 5 Replies View RelatedGeneral :: Send SMS Or Place Voice Calls Via Mobile 3g Modem In Linux?
May 26, 2011I have a ZTE MF112 mobile broadband modem, which comes with Windows drivers and software. This software allows not only connect to Internet, but also send SMS and place calls (as in you dial number in program and when you're connected, sound goes through the sound card). As far as I know, almost any USB mobile modem comes with application to send SMS via its GSM connection.Now the question is - is there any vendor-independent software that runs under Linux and allows you to use your mobile broadband modem to turn your PC into larger mobile phone? I want at least to be able to send and receive SMS using PC + mobile modem.
View 1 Replies View RelatedUbuntu :: Command To Log Method Calls While Doing 'make'
Nov 19, 2010I am building an android, from the source using make command. I want to achieve simple logging while this make is happening.
Aim:
I want to look/log for internal system calls that are being made after i do 'make' command in bash terminal. So that after the make is done, i can look and study the internal method/file calls made while make was happening. In this way i will come to know how the actual building process works.
Networking :: Make A Huawei K3715 HSDPA Modem Work In Ubuntu 10.04.1
Jan 20, 2011I'm trying to make a Huawei K3715 HSDPA modem work in Ubuntu 10.04.1. I plug it in, and it loads two mass storage devices (one CDRom containing the Windows software, and one 2GB drive that appears empty), but I don't really know where to go from here.
Note that I replaced the stock network manager with Wicd, as I find it more reliable in picking up wifi connections. I'm not sure if it's suitable for connecting the HSPA modem though.
Ubuntu :: Pidgin And Make Audio Calls Over SIPE
Mar 17, 2010I have been trying to figure out how to make audio calls in Pidgin. I have enabled the "Video/Voice Settings" plug-in, but do not get any options any where to initiate a voice call. I am trying to do voice over SIPE to Office Communication Server and I am not 100% sure if pidgin-sipe supports audio (I have looked around but can't find any information on features).
View 1 Replies View RelatedProgramming :: Make Multiple Calls Using PJISP?
Apr 12, 2011I have a problem in making multiple calls using PJSIP. I registered different accounts that implements IAccount and added that in the CallManager. When i try to make the calls from the same CallManager, I could able to make the first call. When second call is made the first call got cut and it is alerting and the same for the thrid call..Could anyone help me in this regard.
Note: Calls has to be made from different numbers to different destinations. Is it possible to make multiple outbound calls simultaneously from the same instance of CallManager?
Fedora Networking :: Make Run Modem On Laptop Compaq Presario C700?
Mar 20, 2009How to make run modem on laptop Compaq Presario C700? Modem is HDAUDIO Soft Data Fax with SmartCP com3.
View 4 Replies View RelatedFedora Networking :: Sierra Modem 885 Compass - Install And Make It To Work In 7?
Aug 19, 2009i have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies View RelatedOpenSUSE Hardware :: Headsets As Well As Microphone To Make Voice Calls?
Apr 9, 2010I am looking for an external (usb?) sound card that might work with Linux. I would like to plug in there my headsets as well as my microphone to make voice calls. Do you have anything to suggest that will work fine with my latest opensuse?
View 2 Replies View RelatedProgramming :: Real Difference Between System Calls And Normal Function Calls?
Oct 26, 2010What is the real difference between system calls and normal function calls. Ultimately function calls too would be passed to kernel for some or the other work.
View 7 Replies View RelatedNetworking :: Pages Not Loading Randomly On Dialup
Jan 31, 2011I am currently using Open SuSE 11.3 and connect to the internet through a fixed wireless terminal (CDMA Wireless modem), Huawei ETS-1201 with BSNL connection. The problem is that, after dialling and connecting to the internet, some pages dont load randomly. Sometimes, Google loads quite fine, but other times, it is just stuck and I have to reload the page several times. When I connect through Windows, I have no such problem. I have used Fedora, Ubuntu and Sabayon but the same problem exists. I don't want to return to Windows but is frustrated with my web experience on linux.
View 2 Replies View RelatedCentOS 5 Networking :: How To Create Dialup Server
Oct 29, 2009is there anyone here knows how to setup Dial up server in CentOS 5.3?
View 3 Replies View RelatedNetworking :: Need To Setup Dialup Server To Accept Dial Up Connection Using Pppd
Aug 3, 2009I'm using fedora core-8. I need to setup dialup server to accept dial up connection.Dial up server shoudl also allocate ip address to client (trying to connect using modem)If some one knows how to do this, please let me know.I'm trying to achieve peer to peer communication between two computers connected using modem on both side over PSTN line.
View 2 Replies View RelatedUbuntu Networking :: Install Modem Driver For The Alcatel X200 USB Modem?
Mar 23, 2011find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
Ubuntu Networking :: Huawei E1552 Modem To Connect To The Internet, Everything Was Going Well When Suddenly Modem Stopped Working?
Feb 8, 2010i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
General :: Make A Bash Script Keep Running In Same Terminal After It Calls Second Script?
Jun 25, 2010I have a startup script for jboss (start.sh) that sets some JAVA_OPTS and then calls bash run.sh.If I run it (start.sh) from the command line it runs in the terminal fine. If I make a shortcut launcher for it in gnome and set it for 'application in terminal' it pops up then immediately dies after launch.Not sure what the problem is. Is this not working because one script is calling a second script? But then why does it work when I call ./start.sh?
View 4 Replies View RelatedUbuntu Networking :: Making Calls Using BSNL 3G Dongle?
Nov 19, 2010I live in india and I have a BSNL 3G dongle. I am using it on my laptop. I would like make phone calls using it. I was able to sends sms but no luck on voice call. In windows they provided a software for making voice calls, so the hardware supports it.
View 1 Replies View RelatedSoftware :: Script Calls Another Script Which Calls 'bash' Inside
Mar 15, 2010I need to write a script. In which, the 2nd part commands need to run under another bash shell environment.The enter_antoher_bash_env.sh will setup a new shell environment, call "bash". The rest commands need to run under the new env. (I cannot change this script too. )If I run these command one by one manually, it works of course. If I put them into a script, enter_another_bash_env.sh won't return because it calls "bash" command inside.
View 10 Replies View RelatedUbuntu :: Make Connection In OS Using Huawei E156G Modem?
May 17, 2010How to install "Huawei E156G Modem" in Ubuntu O.S. Are there any special code for configure it. I plug modem but i can't conect to internet. This message appear " you're offline".
View 4 Replies View RelatedHardware :: Check Make And Model Of A Modem?
Sep 5, 2010I have an old external serial modem without indication of make and model.
View 2 Replies View RelatedRed Hat / Fedora :: How To Make The Modem Lights Toolbar Addon To Work
Jun 10, 2010How to make the modem lights toolbar addon to work? They don't seem to work while online with Gnomes KPPP, and it would be nice to see them working while online.
View 2 Replies View RelatedDebian Configuration :: Unable To Make Huawei E1750 Wireless Modem Work With Lenny
Oct 10, 2010I've been trying for a couple of days now to get the Huawei E1750 to work but have had no luck so far. I've installed the packages usb-modeswitch-1.1.4 and usb-modeswitch-data and have edited the usb-modeswitch.conf to include the following:
DefaultVendor= 0x12d1
DefaultProduct= 0×1446
TargetVendor= 0x12d1
[code]....
Ubuntu :: 9.10 - Internet Dialup With Winmodem
Jan 17, 2010I am new to Ubuntu and Linux. I think that I like Ubuntu, but I don't think it likes me! I can't get onto the internet with my "old fashioned" dialup that is preinstalled in my Dell Latitude. In fact I can't find any reference to a dialup modem in Ubuntu 9.10. Have done some research and it appears that my winmodem will not work with linux, but there maybe some complex way around this problem. Can it be done? I have a Conexant HDA D110 MDC V.92 modem.
View 9 Replies View Related