Is there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies
Ist column shows different customers( like N customers are there) , they require different bandwidht links based on some resolution time will be generated and we have to fix this line with in this resolution time , if not before 1 hr for each customer , this has to genetate some alarm and send the SMS to the particular mobile numbers.everythig is there in the GUI like customer , how much BW they want and what is the time duration , only thing we have to do is ,, linking with the GUi and writing some code to send the generated alarms to the mobile numbers specified.
View 5 Replies View RelatedI have a ZTE MF112 mobile broadband modem, which comes with Windows drivers and software. This software allows not only connect to Internet, but also send SMS and place calls (as in you dial number in program and when you're connected, sound goes through the sound card). As far as I know, almost any USB mobile modem comes with application to send SMS via its GSM connection.Now the question is - is there any vendor-independent software that runs under Linux and allows you to use your mobile broadband modem to turn your PC into larger mobile phone? I want at least to be able to send and receive SMS using PC + mobile modem.
View 1 Replies View RelatedI've bought the new AT&T's Velocity/GI461 USB modem. This is a nice toy because into one only stick there are integrated all the features that I need,like the GSM/3G/GPS modules. Googling I've found a good tutorial about how to connect it under Debian and about how to control the GPS data. You can read it going here :
[URL]
but what about to make and receive phone calls through the SIM card integrated and the AT commands ? Can someone give some help ? I've attached some documentation. Maybe this can be done using Wammu and/or Gnokii.
[URL]
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedI heard it possible to make a call from a pstn phone through the internet to a pstn phone elsewhere in the world. The caller pstn phone connects to something called a pbx[dunno what it is] and a linux box running some software[dunno what it is either] connects to the internet.How do I make that work?
View 5 Replies View RelatedI've been trying to get a USB modem stick to work with Karmic.The modem is the ZTE MF626 HSDPA on a Telstra Next G plan.I've followed all the guides and links on the forums:Have deactivated the CD autorun on the USB stick in XP lsusb is showing "Bus 002 Device 003:ID 19d2:0031 ONDA Communication S.p.A." demsg is showing "usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1"This seems stable as well, ie checking periodically it doesn't seem to be disconnecting By the way,the blue light indicating network communication/modem active lights up after the device has been plugged in for a second or so.
When I go through Network Connections and add a new mobile broadband connection, there is nothing listed in the "Create a connection for this mobile broadband device" drop-down on the first configuration screen - all the guides I've read say that it should be listed here, but none say any debug steps if it doesn't.Some other guides for older versions of Ubuntu and earlier versions of the modem reference a "/usr/share/hal/fdi/information/20thirdparty/20-zte-mf626.fdi"file which I don't have.
How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies View RelatedI have a dial-up modem in my Laptop.
Also I have a Dial-up line[Base Phone].
Can I make calls from Dialup modem [Making & Answering calls]?
I am trying to switch to mobile broadband, Ubuntu 9.10, Huawei E1750 modem, provider Telia Sweden. So far I tried this:
(previous: tried to get started with an Option Icon 550 modem, but could not do it. Ubuntu froze completely, networkmanager refused to see the modem after this. Read somewhere that it is (next to) impossible with Ubuntu, but Huawei is a better chance. Maybe I changed some settings on the way, went and got a Huawei)
-connected modem, nothing happened
-rebooted to Windows Vista, installed modem
-rebooted to Ubuntu networkmanager sees the modem, when I select it, it gives a message 'GSM network, disconnected'
Also: Ububtu sees the usb stick as a folder
I tried to use multiple mobile broadband modems in ubuntu 10.10 and encounter a bug as follows:
When i plug in a new modem, all the attached modem is automatic go offline ( thus my connection is down), and try to redial back, sometime the redial is successful, sometime it's not.
It was working fine in ubuntu 9.10, plug in a new modem, all attached modems stay connected.
I have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies View RelatedI've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
I have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
View 7 Replies View RelatedI got Mint 7 running on my Laptop, a Pentium 4 by Dell. It dual boots XP as well. But the mobile broadband which connects by the USB port only works in XP. There are small windows that say it will not run. Errors. How can I get this working in Linux?
View 1 Replies View RelatedI have this usb stick:
The problem is that I have no clue what information I am supposed to give when configuring it through KNetwork manager. The password is disabled and I think the username should be telenor which is my ISP, the other info lines in KNetwork manager, however, I am very uncertain of, and I can't seem to get it working. I have switched from traditional setup with ifup to user controlled through Network Manager and the modem is detected. The module option seems to be loaded and the 'mode' of the stick seems also to be correct, it is not detected as a storage device at least.
We host our own mail server on our Fedora box. We would like for our field people using there smart phones to be able to send and receive mail. Receiving is no problem but sending creates problems with relaying and port assignments. Is there any way sendmail can be configured to allow these mobile phone users (AT&T, Verizon) to send mail through our server?
View 1 Replies View Relatedenable my usb media? such as Usb Flash Disk, Usb Mobile Broadband, Usb Modem, etc. when i run lsusb on my server 9.04, here is the output :
[Code]...
my flashdisk is Kingston Technology Data Traveler 2.0
I want to install a driver for the Mobile broadband HSDPA modem of the Lenovo T510 nootebook because it dosent work with the Networkmanager.
I use opensuse 11.3 whith the kernal 2.6.34-12.
So what i want to do:
1) get attached patch
2) install and extract kernel source
3) patching and compilation (only drivers/usb/serial subdirectory)
4) copy resulting modules to kernel modules directory
If I compile: make O=../temp prepare i get a mistake.
The exactly mmessage is:
I'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
View 2 Replies View RelatedI am looking for an application to assist me to back up my sim card on my mobile telephone. In fact I am aiming to copy all my phone contacts and restore it on a newer phone if possible.
I have previously attempted to do this on Wammu without success.
I have also attempted to install monosim without success.
I just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
View 1 Replies View RelatedIm trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
I have a Nokia phone i want to connect it to internet through my PC.
how to do that ?
I can pair my phone and laptop using bluetooth, from Network manager I can select my phone and make a connection. But then I can't access anything.I looked at the connection info from nm and tried to ping the given dns addresses. That failed. And I pinged those addresses when I reconnected with wireless and it failed. So, where are these setup? I didn't do it
View 8 Replies View RelatedI have internet in my nokia mobile phone I can use it through nokia pc suite in windows but I cant install it in ubuntu so is there a way to my ubuntu to my phone without installing nokia pc suite.
View 9 Replies View Relatedi have both a vodafone and 3 mobile broadband dongles. they both work out of the box, however i am only getting gprs, while i can get 3g/hsdpa using my windows box. is there any gui configuration manager or terminal commands i can use to set it to 3g/hsdpa only? im running ubuntu 9.10.
View 4 Replies View RelatedJust loaded Ubuntu 9.10 on a Dell 5100, (XP finally got the bsod) I have verizon mobile broadband, all was very good until I realized I cannot connect wirelessly. The usb modem was not recognized, there is no indication of any wireless connection. There is no icon and nothing happens when the usb modem is plugged in. I have been working on this for hrs & hrs. I am a complete novice on Linux, but CompT1 A certified on PC's
View 9 Replies View RelatedI have an USB (Huawei 1751) modem for mobile broadband. I had it up and running in Ubuntu 9.10 but I had to clear the computer for various reasons. I have decided to only use LTS versions so for the reinstall I have used Ubuntu 8.04 LTS. I have downloaded and installed usb_modeswitch and can see that the modes is changed to the right value. After that I wanted to add a new mobile broadband connection in the network connections wizzard - but cannot see any settings for mobile broadband. I am sure it must be possible - but where is this function hidden in version 8.04 ?
View 3 Replies View Related
