Ubuntu Networking :: Set Up JVJ 3G Modem - URL Doesn't Work
Aug 30, 2010I have JVJ 3G modem,one from Singapore. I have try out as [URL]... But it doesn't work. Has anyone try it before?
View 4 RepliesI have JVJ 3G modem,one from Singapore. I have try out as [URL]... But it doesn't work. Has anyone try it before?
View 4 RepliesI have safaricom 3g modem but it's not work in ubuntu 10.04. how can I fix this. It's work in windows xp.
View 9 Replies View RelatedI have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
View 7 Replies View RelatedI'm using ubuntu 10.04. My Huawei E156G 3g modem doesn't work with ubuntu, It's detect as a storage device not a modem.
View 2 Replies View RelatedI have recently bought a branded Onda MT835UP USB broadband modem. The hardware comes with its own drivers/GUI for linux, however I'd rather use the Debian-provided NetworkManager+modemmanager packages.
A few details:
- I'm using debian unstable,
- latest NetworkManager 0.8.2-3 from experimental
- latest modemmanager 0.4+git$foo from testing
- latest usb_modeswitch[_data] from experimental
[Code]....
I can connect to the internet using wvdial but NetworkManager is a no-no. Here is some information that's relevant:
Code:
# lsusb | fgrep Huawei
Bus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
[code]....
Ubuntu and Xubuntu read my Motorola Surfboard SBV5120 cable modem via USB "out of the box"; Puppy LInux doesn't. The computer I've run them on doesn't support ethernet, so it has to be via USB. what can I do to get Puppy online?
Computer: Systemax
Processor: AMD athlon
Memory: 189 Mb
Hard drive: 40 Gb
I am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop.
My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.
When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).
When I plug it in before boot up it shows up as a CD rom drive. I have usb-modeswitch is installed. (It was installed by default during the 11.04 installation.)
what to do to get this to work? Remember my Ubuntu is running on an external USB drive so anything that switches USB off even temporarily won't work. (I don't think).
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies View RelatedI had started another thread about this but had a terrible subject line. Others may have this issue.Found the answer deep in the bowels of documentation. My question now is " did version 20 mess this up for everyone with dialup"?
View 4 Replies View RelatedI can't using my usb modem on ubuntu 10.10.
I use vodafone usb modem, without detail information of what type or chipset used.Here is what I can collect, when I plugged the usb modem to laptop..
result of dmesg..
---start---
[ 956.873758] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 956.974318] scsi5 : usb-storage 1-1.1:1.0
[ 957.974336] scsi 5:0:0:0: CD-ROM HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 957.975167] scsi 5:0:0:1: Direct-Access HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
code....
how can I troubleshoot the problem, so the usb modem can work properly.
I have a Compaq Presario 2100 laptop running Ubuntu 8.04LTS. It has a Conexant HSF modem/chipset, for which I bought the Linuxant HSF modem driver- 56K max.It is installed and it "functions",ie: it will connect to my ISP and I can start to browse (Firefox), but it will inevitably disconnect itself. At this point it is always down to "turtle speed of 4800bps".I have consulted with Linuxant Support and they suggested different modem init. strings - mainly different modulations - V34,V90,V92 w/variations. Nothing has made any signif. diff. They won't offer any further help.My question is: Could it be that Ubuntu 8.04 specifically, or Ubuntu of any version, is the source of the problem??
I have Knoppix 5.1.1 Live CD which loads up fine, and I was hoping to try the HSF driver with it, but I need to get Kernel Source pkg. and that will take 2+ hrs. to download by dialup , so haven't tried it yet.
How do I get my Bigpond internet (ZTE MF636 BP) USB modem to work with Ubuntu 10.4 LTS ?
View 1 Replies View RelatedMy brother installed Fedora 8 on my 2004 Dell Inspiron 1000 laptop with a 56k MDC modem. I cannot figure out how to get the dial modem to work! Modem Device?, Baud Rate?, Flow Control?, Modem Volume?
View 1 Replies View RelatedI've been using an old modem from 2007, which my ISP calls Type I. It didn't have wireless connectivity and I used pppoeconf to setup my connection - username and password and set it to connect at boot time and everything was fine till today. I bought a Type II modem from my ISP and had to return the type I modem to them. Since the technician had no knowledge of Ubuntu (or Linux in general), he configured the modem in Windows 7, tested that the connection was working, tested the wireless connection in my netbook running XP and then he left.
Now I can't connect through pppoeconf in Ubuntu (running 9.10). The terminal says eth0 is listed but the 'access concentrator' or something like that isn't responding (no other process was running at that time). I feel very vulnerable while browsing in Windows so I want to get back to Ubuntu ASAP. Oh, and here's the output when I run "dhclient eth0"
Code:
Listening on LPF/eth0/00:16:76:33:d2:70
Sending on LPF/eth0/00:16:76:33:d2:70
Sending on Socket/fallback
DHCPDISCOER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER of 192.168.1.5 from 192.168.1.1
[Code]....
I have a compaq mini 110-1000 with integrated 3g modem and natty narwhal. I bought a vodafone data sim card, I've configured the network manager but it doesn't work! All solution I found are possible only with the hp connection manager. but I've removed windows!!
This is what I see with "lsusb"
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 0461:4d6a Primax Electronics, Ltd
Bus 002 Device 004: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 002 Device 003: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 002 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 10f1:1a0f Importek
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
I'm trying to make a Huawei K3715 HSDPA modem work in Ubuntu 10.04.1. I plug it in, and it loads two mass storage devices (one CDRom containing the Windows software, and one 2GB drive that appears empty), but I don't really know where to go from here.
Note that I replaced the stock network manager with Wicd, as I find it more reliable in picking up wifi connections. I'm not sure if it's suitable for connecting the HSPA modem though.
I have a ZTE HSUPA USB Modem Model:MF636 which used to work great and then is not longer detected.
I am using Fedora 12 and was having problems with the modem not been properly detected and filed a bug, which turned not to be a problem of NetworkManager, but an issue with udev.
https://bugzilla.gnome.org/show_bug.cgi?id=603433
I followed instructions to edit /lib/udev/rules.d/61-option-modem-modeswitch.rules and then it worked fine.
Now the modem is again not properly detected. Here is a copy of the results from dmesg code...
I have tried restoring the file that I edited. It was back to the stated previusly reported. I also have tried to run an older kernel. Then I updated to the latest kernel available for Fedora 12. Nothing seems to work.
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View Relatedi have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies View Relatedfind and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have recently installed ubuntu 10.04. After some days of trying I can say that ekiga doesn't work with 10.04. With the same computer I was perfectly able to use ekiga with ubuntu 8.1, the 10.04 gives me connections problems.... it simply say says "Could not register (Failed)".I'm trying to connect with my voip provider (12voip.com) but it seems that I can't. I have even tried other programs like empathy, Twinkle, QuteCom but with none of them I can connect with my voIP provider. I think there are some connection problems but I really don't know how to face them. We have to configure router in 10.04 for sip connection? Actually I can't phone at all.
View 4 Replies View RelatedI've tried to use netcat in the past and assumed it was my stupidity that was preventing it from working... but this is getting ridiculous. I'll execute nc -l 3333 on a server at 192.168.0.105 (after opening it on the firewall of course) then I run nc 192.168.0.105 3333 on my laptop (from 192.168.0.101). and nothing happens... i start typing and nothing comes up on the terminal.
I run nc -z 192.168.0.105 80 which should ideally do a port scan of port 80 on that server (of which I'm running a web server that clearly works) but it doesnt even give me any feedback. Nothing happens. Now when I use the verbose flag i see that I am indeed connecting to the specified port on the server successfully (so the port scan one is a success but only with the verbose flag... which shouldnt be the case I believe). But still once I have the server listening and the laptop connected... I type in both windows and nothing happens...
I am networked to a Windows machine. I can see and open files across the network. I can see and add my HP 6000 printer (it is on the Windows machine). On my Ubuntu machine this printer has a check mark by "Enabled" and "shared" but I cannot set it as default (that option is ghosted) and when I try to print a test page it says "unable to connect to CIFS host" I downloaded the HP Linux setup program. That program cannot locate the networked printer at all.
View 7 Replies View RelatedI'm running Ubuntu 10.04 on my laptop. Up until about a week ago, my wireless worked fine, but now it rarely connects. Sometimes the connection indicator shows that I am connected, but when I click on it it doesn't show any active networks. Even when I use a wired connection it doesn't always work.
View 3 Replies View Relatedi have had my bluetooth keyboard and mouse working fine for a little while now, then one day.. seemingly out of the blue (no pun intended) it stopped. heres what i deduced:
Mouse works fine, always keyboard doesnt.
I'm using a logitech dinovo edge
and i can manually force the keyboard to connect by putting the keyboard into discoverable mode (press the button on the back of it) and using hidd:
Code:
hidd --connect XX-XX-XX-XX-XX-XX
but who the heck wants to do that on every reboot or resume from sleep! yikes..
firstly, i noticed that bluetoothd was segfaulting alot:
Code:
ec 22 17:26:09 hostname kernel: [21329.811149] usb 2-6.2: new full speed USB device using ohci_hcd and address 6
[Code]....
i've installed it on my parents old computer, mostly for downloading. But wired internet did work all the time but then i had to reset our router because of some problems and now it doesn't work anymore! But the strange thing is, if i put the cable on my own laptop with windows on it, then it works as normal.
So i guess its some kind of DNS problem, but i'm very new with ubuntu and also not so good with computers. Our network is simple just an modem connected to an router: Sitecome WL-341.
Networking on Fedora 11 doesn't work for me on various machines. Fedora 10 does, but only if you don't do an update.Why does Fedora get worse the more you keep it up-to-date?
View 1 Replies View Related