Fedora Networking :: WUSB54g Stopped Working - How To Make It Work

Feb 17, 2010

My wireless adapter stopped working randomly the other day. I think the last time it was working was right before I put the computer into hibernate for the first time. it stopped working even after restarting.modinfo p54usb shows (I'm leaving out information that seems irrelevant because I can't copy and paste without the internet, so I'm typing what I see from another computer)

firmware: isl3887usb
firmware: isl3886usb

dmesg | grep firmware doesn't seem to show any requests for firmware related to it. lsusb shows something like

bus 002 device 001: ID... linux foundation 1.1 root hub
bus 001 device 003: id... linksys wusb54g wireless adapter

[code]....

When I start up, in boot messages I get something like this

WARNING deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING all config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release
Device wlan0 does not seem to be present, delaying initializtion [FAILED]

View 14 Replies


ADVERTISEMENT

Ubuntu Networking :: Wireless Connection Stopped Working - How To Make It Work

Apr 8, 2010

I have ubuntu 9.10 and my wireless connection has been working perfectly until a few weeks ago when I updated my laptop. I can connect to the internet using my wired cable but not by wireless. There is nothing listed under my wireless list. I am new to this and have been unsuccessful in getting my wireless connection going again. I don't even know were to begin. I have a 2wire modem also.

View 2 Replies View Related

Debian Multimedia :: Kde4: X Stopped Working - How To Make It To Work

Mar 10, 2011

There seems to be something that has changed in the newest stable Debian - I chose kde4 as my default desktop at installation, and it worked fine. Then I went and changed some options in both /var/run/kdm/kdmrc and /etc/kde4/kdm/kdmrc, something I have done many times before without problems.

However, when I tried to restart kdm with /etc/init.d/kdm, things didn't come up - no X, no kdm. When I rebooted the machine everything seemed fine, so I thought the problem was solved; but this morning I wanted to change something else - I don't want kdm to remember the last user, and I don't want to see a list of users either. Now dkm and X fail even when I reboot; I also find that /var/run/kdm/kdmrc has disappeared - I am certain I didn't remove it.

The strange thing, when I try /etc/init.d/kdm, I can kdm hanging around all alone in the process list, but no X or greeter. So what is going on - what should I have done instead? And can I repair it? I can of course reinstall the system, but I hate to think that we can't manage better in Linux.

View 4 Replies View Related

Ubuntu :: Program Central Stopped Working - How To Make It Work

Apr 13, 2010

This morning my program central stopped working and i don't know what might have caused it or how to fix it.

the problem is the download button, it doesnt seem to appear anymore as shown below:

[URL]

I got Ubuntu 9.10 64bit running GNOME

View 1 Replies View Related

Ubuntu :: Internal Speakers Stopped Working - How To Make It Work

Apr 26, 2011

I've been running Ubuntu on my Dell Studio 1749 laptop since I got it, around 8 months ago.I recently upgraded to Maverick 10.10 64-bit, reformatting and partitioning my hard drive in the process (got rid of windows since I never use it) and it was working perfectly until last Wednesday (22.4.2011). On Wednesday I unplugged my usb headset while in a Skype call to switch to the internal speakers and my computer freaked out, black-screened, and froze. When I rebooted, the internal speakers had stopped working completely, even though the sound works perfectly on both sets of headphones I have.

I've tried most of the fixes that have been presented in other threads and none of them are working, including rebooting the laptop with the headset in. I've tried that with both of my usb headsets, even though I don�t like using the one that it froze on for the exact reason that any time I have audio playing with that headset and it gets unplugged, it black-screens and freezes my laptop. Actually audio doesn�t even have to be playing, sometimes unplugging it even with nothing playing still freezes my laptop. It does it once in a while with my other usb headset, as well, but not every time or anything close to that often.One thread suggested that modifying /etc/modprobe.d/alsa-base.conf by appending the following line to the file would work:

Code:

options snd-hda-intel model=dell-m6

But that did nothing at all. Someone else said that they saved a copy of alsa-base.conf and replaced the whole thing with that line, so I did that, with no change. Then I purged alsamixer using

Code:

sudo apt-get purge alsa-base

and

Code:

sudo apt-get purge alsa-utils

Then I rebooted, and reinstalled them, which did not fix the issue. However, it did replace the alsa-base.conf file that I modified which shows me that it actually did purge it. (I was an idiot the first time I tried to purge it and only purged and reinstalled alsa-utils..xD So the file did not get replaced, which was when I realised my mistake) I have NOT modified the new file, although I did copy the contents to a text file in case I need to try that fix again.I should also mention that the speakers do work when first booting up Ubuntu to the log-in screen, both with and without headphones I ran the alsamixer diagnostic at the beginning of all this, here's the link: [URL] And then ran it again after purging and reinstalling alsamixer, here's the new link: [URL] I have tried messing with the settings, disabling the headset, setting the input and output manually to internal speakers while the headset is still plugged in, making sure with GNOME alsa-mixer that the speakers are not muted, rebooting with the headsets in and then unplugging them.

View 1 Replies View Related

Fedora Networking :: Get A Second Computer Up Using The WUSB54G Network Adapter Chipset 1915:2234?

Sep 26, 2009

I have only been using Fedora for a month. I am trying to get a second computer up using the WUSB54G network adapter chipset 1915:2234. But the NetworkManager does not recognize it and it does not come up in the list of adapters when I try to add it.

View 8 Replies View Related

Debian Hardware :: Linksys WUSB54G V1 Just Not Work

May 13, 2010

this card has notoriously horrible linux support; how to fix this and nobody ever seems to get it work. But it was working natively on ubuntu, so I know it can be done. I just don't know *how*. I downloaded the isl3890usb firmware, placed it in /usr/local/lib/firmware or whatever the path was in the guide. Soon after, iwconfig was giving me an interface! However it stopped working at this point. I tried iwlist wlan0 scan, but it always just says "no scan results." I manually configure everything and dhclient just tells me "no offers recieved." It appears to have an interface but is just not working at all. Where do I go from here?

View 2 Replies View Related

Ubuntu Networking :: 10.10 Wireless Not Working - How To Make It Work

Jan 8, 2011

I've downloaded all the drivers and have an ethernet connection working however as I have an INSPIRON 1545, the network card is shoddy for LInux and I can't get the wireless working AT ALL.

lshw -C network
*-network
description: Network controller
product: BCM4312 802.11b/g LP-PHY
vendor: Broadcom Corporation

[code]...

View 3 Replies View Related

Fedora Networking :: Wireless Stopped Working In 12

Mar 18, 2010

I am having problem with wireless networking my fedora 12 since i opened network manager yesterday. But to my notice i haven't done any changes. But still i am not able find any reason for the wireless network not to work. When i try to restart the network servies it gives the following msg.

Quote:

Bringing up interface eth0:

This version of ISC DHCP is based on the release available on ftp.isc.org. Features have been added and other changes have been made to the base software release in order to make it work better with this distribution.

Please report for this software via the Red Hat Bugzilla site: [url]

Did i do something wrong with the network manager or did something go wrong with fedora.

View 2 Replies View Related

Fedora Networking :: Cnetworkmanager Stopped Working In F15

Jul 22, 2011

I have been using the commandline for network manager cnetworkmanager in Fedora 14 without any problem. For the most part I used it to restart my vpn connection like so:

Code:
cnetworkmanager --activate-connection=user,'AAABBBCCC',eth0,& this was in a script that I put in the /etc/NetworkManager/dispatcher.d/ folder so it would start automatically whenever the vpn disconnected.

Last night, I had an epiphany and upgraded to Fedora 15, which seems to be working fine for me after updating a few programs including cnetworkmanager

At one point I realized that my neat little script wasn't working anymore though, so I checked out what happens at the commandline when I type the above command in:

Code:
[captainralf@Cap ~]$ cnetworkmanager --activate-connection=user,'AAABBBCCC',eth0,&
[1] 30884
[captainralf@Cap ~]$ Traceback (most recent call last):
File "/usr/bin/cnetworkmanager", line 319, in <module>

[Code]....

View 1 Replies View Related

Ubuntu Networking :: Wired Network Not Working - How To Make It Work

May 30, 2010

My wired network is not working! This is the result of ifconfig -a:

Code:

eth0 Link encap:Ethernet HWaddr 00:1c:25:3e:fe:50
inet6 addr: fe80::21c:25ff:fe3e:fe50/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[code]....

View 8 Replies View Related

Fedora Networking :: Intel Pro 2200BG Stopped Working?

May 12, 2009

I was trying to update the drivers for my wireless card and it no longer works. I have a cisco pcmcia card that I got working to use as a backup, but I would prefer to use my internal card. The card is the Intel Pro 2200BG. Please let me know what information is needed to diagnose and correct this issue. I am relatively new to Linux (Currently using F10) and trying to learn.This is the iwconfig from my cisco card. The Intel card was working fine yesterday. but now doesn;t even show up.

[west@garfield ~]$ iwconfig
lo no wireless extensions.
eth1 no wireless extensions.

[code]...

View 14 Replies View Related

Fedora Networking :: WLAN Controller Has Stopped Working

Aug 1, 2009

I have a Dell XPS M1330. I installed Fedora 10 on a separate partition and left Vista on the first. It was working just fine and for some reason all of the sudden it is not recognizing the Wireless controller. Vista is still working fine although I did get a couple of "WLAN controller has stopped working" errors. I suspect I may have a physical problem with the controller but I'm confused as to why Vista is still using it but Linux is not. The actual physicall "WIFI" light on the laptop does not even illuminate when I boot Linux. No wireless networks appear in the network list under Linux. Particularly since it WAS working fine for months...

View 4 Replies View Related

Fedora Networking :: LAN Stopped Working Through Wireless Router

Sep 17, 2009

I have a wireless router at home, but I usually have my laptop connected to it through an ethernet cable. It had always worked with no problems until some time last week when the wired network stopped working (but the wireless still works with no problem). At first I thought that it was some update, but no. My laptop works ok with the wired network at my office, and I also tried a different laptop at home and it didn't work. It's not the cable either, I tried a different one. I haven't changed any settings in my router.So I really don't know what's going on. I just find it weird that the router's wired networking suddenly stops working but the wireless still works fine...

View 1 Replies View Related

Fedora Networking :: Wireless Card Stopped Working?

Jan 9, 2010

I have a relatively new F12 install (one week old) on which I got my wireless Broadcom card working using kmod-wl-PAE. It was a very easy process - not really a process just yum install kmod-wl-PAE.

After a few updates, I notice that the wireless card stopped working. I assumed maybe there was an update that conflicted, so I did a reinstall of kmod-wl-PAE and it worked again immediately.

Then I started installing compiz-fusion. Immediately after, wireless is broken again. So I yum erase kmod-wl-PAE and then yum install kmod-wl-PAE and it works again.

Now, only slightly later that same day, wireless stops working more or less randomly and I cannot get the reinstall of kmod-wl-PAE to fix it. So I uninstall, disable compiz-fusion, shut down, and restart the computer to try again. My thought is that maybe along the way my autostart compiz or something about compiz is causing the wireless not to configure properly. When I restart, wireless is working. Without kmod-wl-PAE installed:

yum info kmod-wl-PaE
Loaded plugins: presto, refresh-packagekit
Available Packages
Name : kmod-wl-PAE
Arch : i686

[Code].....

One, how is this even possible, and two, what is going on with the wireless working, not working, working, not working?

View 14 Replies View Related

Fedora Networking :: 12 Wireless Stopped Working After Update?

Mar 7, 2010

have a gateway nv78 laptop. I just ran the latest update on Fedora 12, and after Fedora stopped seeing wireless networks all together.

View 8 Replies View Related

Fedora Networking :: VNC Server On Desktop 0 On 14 Stopped Working ?

Mar 9, 2011

For more than a year I was happily using my Fedora 11 remotely through VNC over ssh. I was using desktop 0 on port 5900 so people at the office can see what I am doing.

Yesterday I upgraded to Fedora 12, then 13 and then 14. I installed all updates of F14. All went well until I came to use this server from home as usual. The server was not responding.

I brought up /etc/X11/xorg.conf from a backup tape because I discovered that it is there that screen 0 is set and not in /etc/sysconfig/vncservers and rebooted. No success!

At the command lsof | grep LISTEN, I could not see a listener on port 5900

I activated screen 1 on port 5901 and I could log in OK and with lsof I could see listeners for ports 5901 and 6001 but I need screen 0!

During the day I tried many things including removing the vncserver packages with yum and re-installing them, removing the .vnc folder in the user home folder and starting from scratch. The server is still refusing connection!

View 4 Replies View Related

Fedora Networking :: Broadcom WLAN Suddenly Stopped Working?

Feb 9, 2009

I have an HP Pavilion notebook with a Broadcom WLANcard that had been working very nicely in Fedora Core 10 until this evening, when I took my notebook to a conference room where there was no internet access. (I tried to connect to wireless networks, but there were none in the area, as I discovered.) am now unable to connect to my local (home) wireless network as the device is now non-existent . Can someone please walk me through the steps to fix this or re-install it (I have tried reinstalling broadcom-wl, but that didn't help). My lspci listing is reproduced below:

Code:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)

[code]...

View 10 Replies View Related

Fedora Networking :: Eth0 Suddenly Stopped Working On FC10

Aug 4, 2009

my eth0 suddenly stopped working on FC10. i have been using it the whole time, and now it refuses to even ping the gateway. dhclient is not receiving a dhcp offer and when i put in the information manually, it is not even able to ping the gateway. netstat -rn shows that the destination of the router is going nowhere.

i do not think it is the hardware/software, but rather maybe the provider? i am from central europe but just moved up to great britain and working at a friends place. i can connect the mac powerbook without a problem (it will get an ip with dhcp), but not the linux machine.it is a normal ethernet modem connection here. can it be, that it checks MAC addresses or even the computer names? the powerbook also has a really weired IP address: 77.102.xxxxx

i am not using network manager, but command line tools and have nm uninstalled. does anyone have a clue, what this could be about? i am not a newbie, but this is really puzzling me.....

View 4 Replies View Related

Fedora Networking :: Wireless Suddenly Stopped Working - FC11?

Sep 23, 2009

A few days ago (september 7) my wireless suddenly stopped working. I am using FC11, and have an Atheros AR5211 wireless card and have been using the ath5k driver with GNOME NetworkManager. Wireless networks are detected by NM perfectly fine. When I try to connect, the icon spins around those two dots, and one of them becomes green. If the network is wep protected, it asks for the password. After a while, it times out, regardless of the protection. I don't remember changing pretty much for the last two months, so I'm sort of surprised. I did download and install a kernal, along with an selinux-policy update.

If I run dmesg, relevant looking lines included:

ADDRCONF(NETDEV_UP): wlan0: link is not ready
and a long series of these at the end:
wlan0: direct probe to AP 00:0b:86:4f:8a:20 try 1
wlan0: direct probe to AP 00:0b:86:4f:8a:20 try 1

[code]....

Note: I previously posted this in "Laptops," but Networking seemed like a better place to do it.

View 14 Replies View Related

Fedora Networking :: Wireless Stopped Working After Upgrade To FC11?

Jan 12, 2010

I have a Broadcom wireless card in my hp dv6500z laptop, I had it all working properly in FC9 thanks to bbfuller and his post on the subject. After I upgraded to FC11 I have been unable to get it to connect.

I can see my neighbor's sites and suppose I could see my own if the SSID was allowed to broadcast but I keep that turned off. I put in all of the setting, including the network security key, but it won't connect, then when I go back and look again, the security key is not even close to what I put in; it gets changed to a huge string of characters.

I redownloaded broadcom-wl-4.150.10.5.tar.bz2.tar and followed the instruction on the post once again but no luck, which, after I thought about it, was a waste of time because if I can see other's wireless, then the card must be working. I have tried using Network Manager and not using Network Manager and still no luck...

View 6 Replies View Related

Fedora Networking - ASUS USB N13 Adapter Stopped Working After Upgrade

Apr 12, 2011

I am running Fedora 14. I've had an ASUS wireless adapter working for a few months now, with no problems. Today, I installed updates, one of which required a computer reboot (not just logging out and back in). I rebooted the computer, and when it came back up, the wireless adapter did not work.The adapter is visible after lsusb, but there is no wireless showing after iwconfig. What happened? How do I fix it?

View 10 Replies View Related

Fedora Networking :: Ethernet Connection Stopped Working - Cannot Find Server

Jul 23, 2009

After using fedora 11 for a month or two now the ethernet gave out on me tonight. However if I switch to my ubuntu or windows XP install it runs fine. I made no recent changes to network connections, and no installed programs that should effect it.

kernel version: 2.6.29.6-213.fc11
default connection: eth0(and only connection)
ifcfg-eth0:
# Networking Interface
DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:1F:C6:DB:05:0C
ONBOOT=yes
TYPE=Ethernet
IPV6INIT=no
USERCTL=no
NM_CONTROLLED=yes
NAME=eth0
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
DNS1=192.168.1.254
PEERDNS=yes
PEERROUTES=yes

I have tried, restarting, older kernel, restarting services, and clearing the DNS Cache. The specific error I get is that "Firefox can't find the server", and most other applications return similar. I can however ping websites still. All other computers on the network are running fine, and booting into another system the internet will work. Just not for fedora.

View 14 Replies View Related

Fedora :: Gnome Applications Menu Right Click Not Working / Make It To Work?

Jan 27, 2010

I cannot right click with my mouse on the gnome applications menu to get the properties/edit menu option. This is on F12 on 64bit.
Instead I get: "help, remove from panel, lock panel". I dont have this problem with anything else on the top bar.

---------- Post added at 12:33 PM CST ---------- Previous post was at 12:21 PM CST ----------

Turns out I have to install package alacarte and then go to System > Preferences > Main Menu

View 1 Replies View Related

Ubuntu :: SCIM Stopped Working, But Ibus Doesn't Work Either?

Mar 6, 2010

upgrading to9.10 I suddenly was unable use SCIM to switch language input methods.After searching around, I discovered that with Ubuntu 9.10 Ibus was being used in place of SCIM. That's all fine and good, but I can't get Ibus to work. Specifically, when I open the Ibus settings pane and add my desired languages, the settings aren't saved when I exit.So I tried switching back to SCIM. I changed my bashrc settings and set the keyboard input in language settings back to SCIM. No nice.Honestly, I just want to be able to swich language input methods--I don't care if I use SCIM or Ibus.

View 2 Replies View Related

Ubuntu Networking :: Wireless Suddenly Stopped Working AND Rfkill Command Not Working

Jul 13, 2011

When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.

Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.

I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.

View 1 Replies View Related

Software :: Vnc Server Used To Work Suddenly Stopped Working With Connection Refused Errors

Feb 22, 2011

I have a machine running with slackware64 13.1 and vnc servers is installed on it. It worked for months until yesterday, when I couldnt connect to the machine remotely.

I have 2 vnc "users" on this machine, root and "user". Each have their own desktop. Root has desktop :1 and user had desktop :2. Simple enough.

VNC servers is started via /etc/rc.d/rc.local with the command:

Code:

Code:

It worked flawlessly. I use the very same configuration on my home server, never had a glitch.

From the "distant" machine, I get this error when I try to connect:

Code:

Unable to connect to VNC server

What has changed so it no longer works? I assume its not a network problem since the machines are all located in my home network and there is no firewall or router in between them.

View 2 Replies View Related

Ubuntu :: Get A Linksys Wireless USB Network Adapter WUSB54G To Work On Ubuntu 10?

Jun 5, 2010

I'm trying to get a Linksys Wireless USB Network Adapter WUSB54G to work on Ubuntu 10.

View 4 Replies View Related

Ubuntu Networking :: Linksys WUSB54G - Hook Up Through Wireless With Device

Dec 14, 2010

I have a Linksys Wireless-G USB Network Adapter, 2.4 GHz, 802.11g. It hooks up through USB plug, and when I originally plugged it in I got the message that ubuntu didn't support the drivers, but haven't seen it since. I'm hooked up to a LAN cable right now, and can't seem to figure out how to hook up through wireless with this device. Or I just don't know how. When I click on the network connections button on the top right corner (the two computers). I can see my Wired Internet, but no wireless. When I type lsusb in a terminal I get : (sorry I don't know how to do code blocks) So it is recognizing that it's there, but maybe I just don't know how to use it. Also, I'm running Ubuntu Release 10.04 (lucid).

View 1 Replies View Related

Ubuntu Networking :: Linksys WUSB54g V4 - Disconnect And Require Me To Unplug The Device?

Jun 1, 2010

Bus 001 Device 008: ID 13b1:000d Linksys WUSB54G Wireless Adapter
wlan1 Link encap:Ethernet HWaddr 00:18:f8:33:91:7d
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0[code]........

It is the linksys WUSB54g V4, im assuming it runs on the rt2500 chipset,when im connected and working it runs fine, however if i try to let a download run, it generally will disconnect and require me to unplug the device and plug it back in to get it working again, i cant just reconnect if i do that it simply wont connect, im connecting to a linksys router with the most recent firmware i think its the wrt54g v7, its setup using a wpa personal password and im connected through manual entry of my ip address due to port forwarding for some of my games, however the same issue persists even when im connected through an automatic configuration.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved